Stability-indicating methods for determination of pyritinol dihydrochloride in the presence of its precursor and degradation product by derivative spectrophotometry

A first-derivative spectrophotometric (1D) method and a derivative-ratio zero-crossing spectrophotometric (1DD) method were used to determine pyritinol dihydrochloride (I) in the presence of its precursor (II) and its degradation product (III) with 0.1N hydrochloric acid as a solvent. Linear relationships were obtained in the ranges of 6-22 microg/mL for the (1D) method and 6-20 microg/mL for the (1DD) method. By applying the proposed methods, it was possible to determine pyritinol dihydrochloride in its pure powdered form with an accuracy of 100.36 +/- 1.497% (n = 9) for the (1D) method and an accuracy of 99.92 +/- 1.172% (n = 8) for the (1DD) method. Laboratory-prepared mixtures containing different ratios of (I), (II), and (III) were analyzed, and the proposed methods were valid for concentrations of < or = 10% (II) and < or = 50% (III). The proposed methods were validated and found to be suitable as stability-indicating assay methods for pyritinol in pharmaceutical formulations.     

Proton spin-lattice relaxation studies. N-aryl-1-isoindolinones

Proton spin-lattice relaxation rates (R₁ values) have been measured, at 270 MHz, for a series of N-aryl isoindolinones. A normalization procedure has been used to enable comparison of R₁ values in different compounds by minimizing the effects on relaxation rates of changes in motional correlation times accompanying changes in substitution patterns. A substantial (4.3-fold) dynamic range of R₁ values has been observed, and individual values have been correlated with the molecular environments of the nuclei. There is evidence for an interring relaxation process.     

Synthesis and characterization of platinum(II) and (IV) complexes containing hexamethyleneimine ligand: crystal structure of [Pt(hexamethyleneimine)2(cyclobutanedicarboxylato)]·H2O

A series of new platinum(II) and platinum(IV) complexes of the type [Pt^II(HMI)₂X] (where HMI=hexamethyleneimine, X=dichloro, sulfato, 1,1-cyclobutanedicarboxylato [CBDCA], oxalato, methylmalonato, or tatronato) and [Pt^IV(HMI)₂Y₂Cl₂] (where Y=hydroxo, acetato, or chloro) were synthesized and characterized by infrared (IR) spectroscopy, ¹³C and ¹⁹⁵Pt nuclear magnetic resonance (NMR) spectroscopy and elemental analysis. Among the complexes synthesized, [Pt^II(hexamethyleneimine)₂(1,1-cyclobutanedicarboxylato)]·H₂O was examined by single-crystal X-ray diffraction. The slightly distorted square planar coordination environment of the platinum metal includes the amino group of the hexamethyleneimine (HMI) molecule and the oxygen atoms of the carboxylato ligand. The cyclobutanedicarboxylic acid (CBDCA) molecule adopts six-member chelating rings with platinum. Hydrogen bonding plays an important part in holding the crystal lattice together.     

Synthesis of 1-oxa-2-silacyclopentane derivatives via intramolecular nucleophilic attack at silicon

Metalation of (HSiMe₂)₃CH with lithium diisopropylamide (LDA) in THF gives (HSiMe₂)₃CLi, which reacts with ethylene oxide, propylene oxide, 1,2-epoxy butane, 1,2-epoxy pentane, 1,2-epoxy hexane, and epichlorohydrin to give the corresponding 1-oxa-2-silacyclopentane derivatives. Then, glycidylmethacrylate (GM) random copolymers with styrene (St) (in a 1:1 and 1:3 mol ratio) were synthesized by solution free radical polymerization at 70(±1) °C using α,α′-azobis(isobutyronitrile) (AIBN) as an initiator. Both types of copolymers were treated with (HSiMe₂)₃CLi to give new modified copolymers. The reaction of (HSiMe₂)₃CLi with epoxides on the side chains of the copolymers does not lead to intramolecular nucleophilic attack contrary to simple epoxides. All the products have been characterized by spectroscopic techniques.     

Simultaneous Kinetic‐Spectrophotometric Determination of Hydrazine and its Derivatives by Partial Least Squares and Principle Component Regression Methods

Simultaneous kinetic‐spectrophotometric determination of a ternary mixture of hydrazine (HZ) and its derivatives by principal component regression (PCR) and partial least squares (PLS) calibration is described. The methods were based on the difference observed in the reduction rate of iron(III) with HZ, thiosemicarbazide (TSCZ) and phenylhydrazine (PHZ) in the presence of 2,2′‐bipyridine (Bpy). The colored complex of [Fe(Bpy)₃]²⁺ was formed in sodium dodecyl sulfate (SDS) as micellar media, and then monitored at 520 nm. The results showed that simultaneous determination of HZ, TSCZ and PHZ could be performed in their concentration ranges of 1.0–70.0, 0.2–6.0 and 0.1–10.0 μg mL^?1, respectively. The root mean squares errors of prediction (RMSEP) of HZ, TSCZ and PHZ were 0.719, 0.164 and 0.105 (for PLS) 0.788, 0.166 and 0.993 (for PCR), respectively. Both methods (PCR and PLS) were validated using a set of synthetic sample mixtures and then applied for simultaneous determination of HZ, TSCZ and PHZ in water samples.     

Modification of carbon ceramic electrode prepared with sol-gel technique by a thin film of chlorogenic acid: application to amperometric detection of NADH

The carbon ceramic electrode prepared with sol-gel technique is modified by a thin film of chlorogenic acid (CGA). By immersing the carbon ceramic electrode in aqueous solution of chlorogenic acid at less than 2 s a thin film of chlorogenic acid adsorbed strongly and irreversibly on the surface of electrode. The cyclic voltammetry of the resulting modified CCE prepared at optimum conditions shows a well-defined stable reversible redox couple due to hydroquinone/quinone system in both acidic and basic solutions. The modified electrode showed excellent electrocatalytic activity toward NADH oxidation and it also showed a high analytical performance for amperometric detection of NADH. The catalytic rate constant of the modified carbon ceramic electrode for the oxidation of NADH is determined by cyclic voltammetry measurement. Under the optimised conditions the calibration curve is linear in the concentration range 1-120 μm. The detection limit (S/N = 3) and sensitivity are 0.2 μM and 25 nA μM⁻¹.The results of six successive measurement-regeneration cycles show relative standard deviations of 2.5% for electrolyte solution containing 1 mM NADH, indicating that the electrode renewal gives a good reproducible and antifouling surface. The advantages of this amperometric detector are: high sensitivity, excellent catalytic activity, short response time t < 2 s, remarkable long-term stability, simplicity of preparation at short time and good reproducibility.     

Brightly phosphorescent trinuclear copper(I) complexes of pyrazolates: substituent effects on the supramolecular structure and photophysics

Synthetic details, solid-state structures, and photophysical properties of a group of trimeric copper(I) complexes containing pyrazolate ligands are described. The reaction of copper(I) oxide and the fluorinated pyrazoles [3-(CF(3))Pz]H, [3-(CF(3)),5-(Me)Pz]H, and [3-(CF(3)),5-(Ph)Pz]H leads to the corresponding trinuclear copper(I) pyrazolates, {[3-(CF(3))Pz]Cu}(3), {[3-(CF(3)),5-(Me)Pz]Cu}(3), and {[3-(CF(3)),5-(Ph)Pz]Cu}(3), respectively, in high yield. The {[3,5-(i-Pr)(2)Pz]Cu}(3) compound was obtained by a reaction between [Cu(CH(3)CN)(4)][BF(4)], [3,5-(i-Pr)(2)Pz]H, and NEt(3). These compounds as well as {[3,5-(Me)(2)Pz]Cu}(3) and {[3,5-(CF(3))(2)Pz]Cu}(3) adopt trimeric structures with nine-membered Cu(3)N(6) metallacycles. There are varying degrees and types of intertrimer Cu...Cu interactions. These contacts give rise to zigzag chains in the fluorinated complexes, {[3-(CF(3))Pz]Cu}(3), {[3-(CF(3)),5-(Me)Pz]Cu}(3), {[3-(CF(3)),5-(Ph)Pz]Cu}(3), and {[3,5-(CF(3))(2)Pz]Cu}(3), whereas the nonfluorinated complexes, {[3,5-(Me)(2)Pz]Cu}(3) and {[3,5-(i-Pr)(2)Pz]Cu}(3) form dimers of trimers. Out of all the compounds examined in this study, {[3-(CF(3)),5-(Ph)Pz]Cu}(3) has the longest (3.848 Angstroms) and {[3,5-(Me)(2)Pz]Cu}(3) has the shortest (2.946 Angstroms) next-neighbor intertrimer Cu...Cu distance. The Cu...Cu separations within the trimer units do not vary significantly (typically 3.20-3.26 Angstroms). All of these trinuclear copper(I) pyrazolates show bright luminescence upon exposure to UV radiation. The luminescence bands are hugely red-shifted from the corresponding lowest-energy excitations, rather broad, and unstructured even at low temperatures, suggesting metal-centered emissions owing to intertrimer Cu...Cu interactions that are strengthened in the phosphorescent state. The {[3-(CF(3)),5-(Ph)Pz]Cu}(3) compound exhibits an additional highly structured phosphorescence with a vibronic structure corresponding to the pyrazolyl (Pz) ring. The luminescence properties of solids and solutions of the trimeric compounds in this study show fascinating trends with dramatic sensitivities to temperature, solvent, concentration, and excitation wavelengths.     

Triosmium clusters derived from the reactions of thioureas with dodecacarbonyltriosmium: Crystal structures of [Os3(CO)11{η 1-SC(NMe2)2}], [Os3(CO)9(μ-OH)(μ-OMeOCO){η 1-SC(NMe2)2}] and [(μ-H)Os3(CO)9{μ 3-NHC(S)NH2}]

The reaction of [Os₃(CO)₁₂] with tetramethylthiourea in the presence of a methanolic solution of Me₃NO·2H₂O at 60° yields the compounds [Os₃(CO)₁₁{η ¹-SC(NMe₂)₂}] (1) in 56% yield and [Os₃(CO)₉(μ-OH)(μ-MeOCO){η ¹-SC(NMe₂)₂}] (2) in 10% yield in which the tetramethylthiourea ligand is coordinatedvia the sulfur atom at an equatorial position. Compound2 is a 50 e^? cluster with two metal-metal bonds and the hydroxy and methoxycarbonyl ligands bridging the open metal-metal edge. In contrast, the analogous reaction of [Os₃(CO)₁₂] with thiourea gives the compounts [(μ-H)Os₃(CO)₁₀{μ-NHC(S)NH₂}] (3) in 8% yield and [(μ-H)Os₃(CO)₉{₃-NHC(S)NH₂}] (4) in 30% yield. In3, the thioureato ligand bridges two osmium atomsvia the sulfur atom, whereas in4 in addition to the sulfur bridge, one of the nitrogen atoms of thioureato moiety bonds to the remaining osmium atom. The decacarbonyl compounds 3 can also be obtained in 50% yield from the reaction of [Os₃(CO)₁₀(MeCN)₂] with thiourea at ambient temperature. Compound3 converts to4 (65%) photochemically. Compound1 reacts with PPh₃ and acetonitrile at ambient temperature to give the simple substitution products [Os₃(CO)₁₁(PPh₃)] and [Os₃(CO)₁₁(MeCN)], respectively, while with pyridine, the oxidative addition product [(μ-H)Os₃(CO)₁₀(μ-NC₅H₄] is formed at 80°C. All the new compounds are characterized by IR,¹-H-NMR and elemental analysis together with the X-ray crystal structures of1,2 and4. Compound1 crystallizes in the triclinic space group P $P\bar 1$ with unit cell parametersa = 8.626(3) Å,b = 11.639(3) Å,c = 12.568(3_ Å,α = 84.67(2)°,β = 75.36(2)°,γ = 79.49(3)°,V = 1199(1) ų, andZ = 2. Least-squares refinement of 4585 reflections gave a final agreement factor ofR = 0.0766 (R _w = 0.0823). Compound2 crystallizes in the monoclinic space group P2_1/n with unit cell parametersa = 9.149(5) Å,b = 17.483(5) Å,c = 15.094(4) Å,β = 91.75(2)°,V = 2413(2) ų, andZ = 4. Least-squares refinement of 3632 reflections gave a final agreement factor ofR = 0.0603 (R _w = 0.0802). Compound4 crystallizes in the monoclinic space group C2/c with unit cell parametersa = 13.915(7) Å,b = 14.718(6) Å,c = 17.109(6) Å,β = 100.44(3)°,V = 3446(5) ų, andZ = 8. Least-squares refinement of 2910 reflections gave a final agreement factor ofR = 0.0763 (R _w = 0.0863).     

Thermal and thermoxidative degradations of starch and thermosensitive starch-g-BAM copolymers

Summary Thermal degradation under N₂atmosphere and thermoxidative degradation under air atmosphere of increasingly grafting efficiency values (i.e. GE%=0.0 to 35.5) for starch and starch grafted with N-tert-butylacrylamide thermosensitive copolymers (starch-g-BAM) by Ozawa and Kissinger methods using thermogravimetric analysis (TG) and differential scanning calorimetry techniques (DSC) at 10, 30 and 50% mass losses respectively have been studied. Influence of physical inter and intra molecular interactions on grafting and consequently on activation energy of degradation (E_a,d) was investigated using Ozawa's method, whereas linear dependence of E_a,don GE% by scaling relations using Kissinger's method was determined. Furthermore, the thermoxidative degradation induces the possibility of molecular rearrangement, cyclization and partial crosslinking that is deduced from the activation energy of degradation (E_a,d) and residual mass of TG profile. Thermal stability of starch does not alter as a result of different grafting efficiency percentages.     

Theoretical determination of chromophores in the chromogenic effects of aromatic neurotoxicants

We report the first computational study of the chromophores responsible for the chromogenic effects of aromatic neurotoxicants containing a 1,2-diacetyl moiety in their oxidation metabolites. A series of ab initio electronic structure calculations was performed on two representative aromatic compounds, 1,2-diacetylbenzene (1,2-DAB) and 1,2-diacetyl tetramethyl tetralin (1,2-DATT), the putative active metabolites of the neurotoxic aromatic hydrocarbon compounds 1,2-diethylbenzene (1,2-DEB) and acetyl ethyl tetramethyl tetralin (AETT), and on the products of their possible reactions with proteins that result in chromogenic effects. The electronic excitation energies determined by three different computational approaches were found to be consistent with each other. The calculated results are consistent with the conclusion/prediction that the chromogenic effects of 1,2-DAB (or 1,2-DEB) and 1,2-DATT (or AETT) could result from ninhydrin-like reactions, rather than the formation of pyrrole-like compounds. Our pK(a) calculations further indicate that the chromophore, i.e., the product of the ninhydrin-like reaction showing the blue color, is deprotonated in neutral aqueous solution. The corresponding protonated structure has a different color as it absorbs in the blue region of the visible spectrum, and its chromogenic contribution would be significant in solution at low pH.