Mechanically Interlocked Single‐Wall Carbon Nanotubes

Extensive research has been devoted to the chemical manipulation of carbon nanotubes. The attachment of molecular fragments through covalent‐bond formation produces kinetically stable products, but implies the saturation of some of the C? C double bonds of the nanotubes. Supramolecular modification maintains the structure of the SWNTs but yields labile species. Herein, we present a strategy for the synthesis of mechanically interlocked derivatives of SWNTs (MINTs). In the key rotaxane‐forming step, we employed macrocycle precursors equipped with two π‐extended tetrathiafulvalene SWNT recognition units and terminated with bisalkenes that were closed around the nanotubes through ring‐closing metathesis (RCM). The mechanically interlocked nature of the derivatives was probed by analytical, spectroscopic, and microscopic techniques, as well as by appropriate control experiments. Individual macrocycles were observed by HR STEM to circumscribe the nanotubes.     

Thorough evaluation of the validity of conventional enantio-gas chromatography in the analysis of volatile chiral compounds in mandarin essential oil: A comparative investigation with multidimensional gas chromatography

The present research is focused on the determination of the enantiomeric distribution of chiral compounds, contained in mandarin essential oils, by means of conventional chiral gas chromatography with flame ionization detection (enantio-GC-FID); the results attained were compared with those derived from heart-cutting multidimensional GC-mass spectrometry (MDGC/MS), to evaluate the reliability of the monodimensional technique as a tool for quality control. The Deans-switch MDGC system was equipped with two GC ovens, which were connected via a heated transfer line, a flame ionization detector (FID1) in the first dimension and a quadrupole MS as second-dimension detector. The a priori knowledge of potential co-elutions concerning target compounds (an enantiomer and an interfering compound), when using enantio-GC-FID, could enable the use of corrected enantiomer excess values. Correction factors could be calculated through a preliminary GC-FID analysis (using an apolar column), considering the peak areas of the known interferences. The method used for the calculation of a so-called “coelution correction factor” is described, along with some examples.     

Multivariate optimization of a headspace solid‐phase microextraction method followed by gas chromatography with mass spectrometry for the determination of terpenes in Nicotiana langsdorffii

A simple and sensitive procedure based on headspace solid‐phase microextraction and gas chromatography with mass spectrometry was developed for the determination of five terpenes (α‐pinene, limonene, linalool, α‐terpineol, and geraniol) in the leaves of Nicotiana langsdorffii. The microextraction conditions (extraction temperature, equilibration time, and extraction time) were optimized by means of a Doehlert design. The experimental design showed that, for α‐pinene and limonene, a low temperature and a long extraction time were needed for optimal extraction, while linalool, α‐terpineol, and geraniol required a high temperature and a long extraction time. The chosen compromise conditions were temperature 60°C, equilibration time 15 min and extraction time 50 min. The main analytical figures of the optimized method were evaluated; LODs ranged from 0.07 ng/g (α‐pinene) to 8.0 ng/g (geraniol), while intraday and interday repeatability were in the range 10–17% and 9–13%, respectively. Finally, the procedure was applied to in vitro wild‐type and transgenic specimens of N. langsdorffii subjected to abiotic stresses (chemical and heat stress). With the exception of geraniol (75–374 ng/g), low concentration levels of terpenes were measured (ng/g level or lower); some interesting variations in terpene concentration induced by abiotic stress were observed.     

Nanoparticles based on novel amphiphilic polyaspartamide copolymers

In this article, the synthesis of two amphiphilic polyaspartamide copolymers, useful to obtain polymeric nanoparticles without using surfactants or stabilizing agents, is described. These copolymers were obtained starting from α,β-poly-(N-2-hydroxyethyl)-dl-aspartamide (PHEA) by following a novel synthetic strategy. In particular, PHEA and its pegylated derivative (PHEA-PEG₂₀₀₀) were functionalized with poly(lactic acid) (PLA) through 1,1′-carbonyldiimidazole (CDI) activation to obtain PHEA–PLA and PHEA-PEG₂₀₀₀–PLA graft copolymers, respectively. These copolymers were properly purified and characterized by ¹H-NMR, FT-IR, and Size Exclusion Chromatography (SEC) analyses, which confirmed that derivatization reactions occurred. Nanoparticles were obtained from PHEA–PLA and PHEA-PEG₂₀₀₀–PLA graft copolymers by using the high pressure homogenization-solvent evaporation method, avoiding the use of surfactants or stabilizing agents. Polymeric nanoparticles were characterized by dimensional analysis, before and after freeze-drying process, and Scanning Electron Microscopy (SEM). Zeta potential measurements and X-ray Photoelectron Spectroscopy (XPS) analysis demonstrated the presence of PEG and/or PHEA onto the PHEA-PEG₂₀₀₀–PLA and PHEA–PLA nanoparticle surface, respectively.     

Gold internal standard correction for elemental imaging of soft tissue sections by LA-ICP-MS: element distribution in eye microstructures

Laser ablation coupled to inductively coupled plasma mass spectrometry has been developed for the elemental imaging of Mg, Fe and Cu distribution in histological tissue sections of fixed eyes, embedded in paraffin, from human donors (cadavers). This work presents the development of a novel internal standard correction methodology based on the deposition of a homogeneous thin gold film on the tissue surface and the use of the ¹⁹⁷Au⁺ signal as internal standard. Sample preparation (tissue section thickness) and laser conditions were carefully optimized, and internal normalisation using ¹⁹⁷Au⁺ was compared with ¹³C⁺ correction for imaging applications. ²⁴Mg⁺, ⁵⁶Fe⁺ and ⁶³Cu⁺ distributions were investigated in histological sections of the anterior segment of the eye (including the iris, ciliary body, cornea and trabecular meshwork) and were shown to be heterogeneously distributed along those tissue structures. Reproducibility was assessed by imaging different human eye sections from the same donor and from ten different eyes from adult normal donors, which showed that similar spatial maps were obtained and therefore demonstrate the analytical potential of using ¹⁹⁷Au⁺ as internal standard. The proposed analytical approach could offer a robust tool with great practical interest for clinical studies, e.g. to investigate trace element distribution of metals and their alterations in ocular diseases.

Ionomic profiling of Nicotiana langsdorffii wild-type and mutant genotypes exposed to abiotic stresses

To provide a new insight into the response of plants to abiotic stresses, the ionomic profiles of Nicotiana langsdorffii specimens have been determined before and after exposure to toxic metals (chromium) or drought conditions. The plants were genetically transformed with the rat glucocorticoid receptor (GR) or the gene for Agrobacterium rhizogenes rolC, because these modifications are known to produce an imbalance in phytohormone equilibria and a significant change in the defence response of the plant. Elemental profiles were obtained by developing and applying analytical procedures based on inductively coupled plasma atomic emission and mass spectrometry (ICP–AES/MS). In particular, the removal of isobaric interferences affecting the determination of Cr and V by ICP–MS was accomplished by use of a dynamic reaction cell, after optimization of the relevant conditions. The combined use of ICP atomic emission and mass spectrometry enabled the determination of 29 major and trace elements (Ba, Bi, Ca, Cd, Co, Cr, Cu, Eu, Fe, Ga, K, Li, Mg, Mn, Mo, Na, P, Pb, Pt, Rb, S, Sb, Sn, Sr, Te, V, W, Y, and Zn) in different parts of the plants (roots, stems, and leaves), with high accuracy and precision. Multivariate data processing and study of element distribution patterns provided new information about the ionomic response of the target organism to chemical treatment or water stress. Genetic modification mainly affected the distribution of Bi, Cr, Mo, Na, and S, indicating that these elements were involved in biochemical processes controlled by the GR or rolC genes. Chemical stress strongly affected accumulation of several elements (Ba, Ca, Fe, Ga, K, Li, Mn, Mo, Na, P, Pb, Rb, S, Sn, Te, V, and Zn) in different ways; for Ca, Fe, K, Mn, Na, and P the effect was quite similar to that observed in other studies after treatment with other transition elements, for example Cu and Cd. The effect of water deficit was less evident, mainly consisting in a decrease of Ba, Cr, Na, and Sr in roots.

The correct assignment of stereochemistry in di‐μ‐dichlorido‐bis{bis[2‐(5‐benzylsulfonyl)‐3‐fluoro‐2‐(pyridin‐2‐yl)phenyl‐κ2N,C1]iridium(III)} toluene monosolvate

The title complex, [Ir₂(C₁₈H₁₃FNO₂S)₄Cl₂]·C₇H₈, was crystallized from dichloromethane solution under a toluene atmosphere. It is a dimeric complex in which each of the two Ir^III centres is octahedrally coordinated by two bridging chloride ligands and by two chelating cyclometalated 2‐(4‐benzylsulfonyl‐2‐fluorophenyl)pyridine ligands. The crystal structure analysis unequivocally establishes the trans disposition of the two cyclometalated ligands bound to each Ir^III centre, contrary to our previous hypothesis of a cis disposition. The latter was based on the ¹H NMR spectra of a series of dimeric benzylsulfonyl‐functionalized dichloride‐bridged iridium complexes, including the compound described in the present work [Ragni et al. (2009). Chem. Eur. J. 15 , 136–148]. The toluene solvent molecules, embedded in cavities in the crystal structure, are highly disordered and could not be modelled successfully; their contribution was removed from the refinement using the SQUEEZE routine in the program PLATON [Spek (2009). Acta Cryst. D 65 , 148–155].     

Chestnut Shell as Unexploited Source of Fermentable Sugars: Effect of Different Pretreatment Methods on Enzymatic Saccharification

Chestnut shell (CS) is an agronomic residue mainly used for extraction of antioxidants or as adsorbent of metal ions. It also contains some polysaccharide that has not been considered as potential source of fermentable sugars for biofuel production until now. In this study, the effect of different pretreatment methods on CS was evaluated in order to obtain the greatest conversion of cellulose and xylan into fermentable sugars. Hot acid impregnation, steam explosion (acid-catalysed or not), and aqueous ammonia soaking (AAS) were selected as pretreatments. The pretreated biomass was subjected to saccharification with two enzyme cocktails prepared from commercial preparations, and evaluation of the best pretreatment and enzyme cocktail was based on the yield of fermentable sugars produced. As AAS provided the best result after preliminary experiments, enhancement of sugar production was attempted by changing the concentrations of ammonium hydroxide, enzymes, and CS. The optimal pretreatment condition was 10 % ammonium hydroxide, 70 °C, 22 h with CS at 5 % solid loading. After saccharification of the pretreated CS for 72 h at 50 °C and pH 5.0 with a cocktail containing cellulase (Accellerase 1500), beta-glucosidase (Accellerase BG), and xylanase (Accellerase XY), glucose and xylose yields were 67.8 and 92.7 %, respectively.     

Antarctic Environmental Specimen Bank-First 5 Years of Experience

Abstract

The Project on an Antarctic Environmental Specimen Bank (Banca Campioni Ambientali Antartici—BCAA) began in 1994 in order to collect and classify samples from the Antarctic ecosystem to be used for future studies.

The objectives of the project are similar to the general aims of the Environmental Specimen Banks, but they specifically focus on the chemical aspects concerning the research activities of the Italian Project on the “Micropollutants Chemistry” (Sector “Chemical Contamination” of the Italian Antarctic Research Programme—PNRA).

During these first years the facilities suitable for storing a significant number of specimens (now over 2,000) at different temperatures (from ?30°C to ?150°C) and a database system, specifically designed for managing and consulting information concerning both the storage of samples and data on their chemical characterisation, have been developed.

In addition, a programme for validating the procedures of Antarctic organisms storage by checking the stability of some chemical parameters both in fresh and freeze-dried specimens has been developed.