Determination and confirmation of malachite green and leucomalachite green residues in salmon using liquid chromatography/mass spectrometry with no-discharge atmospheric pressure chemical ionization

A liquid chromatography/mass spectrometry (LC/MS) method was developed to quantitate and confirm residues of leucomalachite green (LMG) in salmon tissue after their conversion to chromic malachite green (MG) in the extraction process. The method uses no-discharge atmospheric pressure chemical ionization (APCI) in conjunction with an ion-trap instrument to generate product-ion spectra. In the sample preparation procedure, salmon tissue is extracted with acetonitrile/buffer, the LMG residue is partitioned into methylene chloride, the LMG is converted to MG using an organic oxidizing agent, and the MG is isolated on alumina/propylsulfonic acid solid-phase extraction cartridges. The method was validated by fortifying salmon with different levels of LMG, and then detecting the residue as MG The LC/MS conditions, including a comparison of electrospray and no-discharge APCI, were evaluated and optimized. MG was not confirmed in any of the control tissue extracts, and all fortified samples analyzed during validation met the confirmation criteria as described. In addition to providing confirmatory data, this method can provide an alternative method for quantitation of MG in salmon. The recoveries of LMG measured as MG by this LC/MS method, at fortification levels of 1-10 ng/g were very high (86-109%), with low relative standard deviation(RSD) values (6.4-13%). The results agreed very closely with those obtained for the same extracts using an LCNIS procedure, indicating that matrix suppression was not an issue. The presence of LMG in salmon tissue samples fortified at 0.25 ng/g was confirmed by this method, with an average recovery of 70.1% and an RSD of 12.0%. Sample extracts from fish exposed to MG were also analyzed.     

Zur Kenntnis von Natrium-hexafluoromanganat(III)

Sodium hexafluoromanganate(III) has been synthesized by heating equimolecular quantities of Na₂MnF₅ and NaF in argon atmosphere. The compound is monoclinic witha=5.56 (1) Å,b=5.84 (1) Å,c=8.10 (2) Å, =90.7 (2) andZ=2. It is a high spin complex with _eff and the deformation of the octahedra is evident from its IR-spectra. Two enantiotropic transitions (at 562 and 653°C) and the melting point at 800°C have been observed.

---

---

8. Mitt.: Mh. Chem.106, 483 (1975).     

The synthesis and chemical reactions of certain pyrazolo[1,5-a]-1,3,5-triazines

3-Aminopyrazole was utilized as a starting material for the preparation of certain pyrazolo-[1,5-a]-1,3,5-triazines. 4-Chloro-2-methylthiopyrazolo[1,5-a]-1,3,5-triazine was prepared and used for studies of nucleophilic displacement reactions, and it has been found that both the chloro and methylthio groups may be displaced by nucleophiles. By modifications of these procedures we have prepared the adenine, hypoxanthine, and xanthine analogs of the pyrazolo-[1,5-a]-1,3,5-triazine ring system. Electrophilic substitution occurs in the 8-position of this ring system. The methyl group was introduced into the 4-position by a novel ring opening and ring closing of the 1,3,5-triazine ring.     

Molybdenum(VI) and molybdenum(V) mononuclear and dinuclear complexes with 1,3-diphenyl-1,3-propanedione

Summary The synthesis and the dinuclear or mononuclear nature of several molybdenum(VI) and molybdenum(V) oxocomplexes derived from 1,3-diphenyl-1,3-propanedione (HLL) are described. These complexes were identified by i.r. and electronic spectra, magnetic susceptibility and analytical data, and are assigned the following formulae: [MoO₂(LL)₂], [Mo₂O₅(LL)₂], [Mo₂O₄(LL)₂], [MoOCl(LL)₂], [MoCl₂(LL)] and [MoO(OH)(LL)₂)]. The low magnetic moments of the dinuclear complexes are due, in part, to intramolecular interactions. The i.r. data show that the dionate is bound by two oxygen atoms forming a chelate six-membered ring.     

Laser technology application: Deformation and elastic recovery of semi-crystalline polymers

The elastic deformation-recovery and mechanical properties of semi-crystalline polymers (HDPE, LDPE and their blends) were investigated. An optoelectronic technique based on a laser beam was used to analyze the behavior of the samples under radial stress. The laser technology showed that the recovery process develops in two stages. The first one is governed by the elastic component and the second and slower one is controlled by the inelastic component of the material. At low deformation, the overall recovery is attributed to the development of structural micro-domains generated when shearing the amorphous segments of the polymer. The radial Young modulus was also determined and compared to unidirectional measurements. At low deformation both techniques provide very similar values; nevertheless, the radial Young modulus departs significantly from the unidirectional one when increasing the number of cycles of deformation-recovery.     

Complexation of the Non-steroidal Anti-inflammatory Drug Nabumetone with Modified and Unmodified Cyclodextrins

The inclusion of the anti-inflammatory drug, Nabumetone, in -, - and hydroxypropyl--cyclodextrin (CDs) is studied using UV-VIS absorption and steady-state fluorescence emission. Binding constants and thermodynamic parameters of complex formation are determined by spectrofluorimetry. The inclusion phenomena of Nabumetone with the three cyclodextrins is compared with that of the well known similar anti-inflammatory drug Naproxen. In the case of Nabumetone pronounced differences are observed in the complexation process with each cyclodextrin whereas the respective Naproxen complexes are nearly identical. ¹H-NMR experiments show that the inclusion process in Nabumetone can occur either through the substituents in the -2 (butanone) or -6 (methoxy) positions in the naphthalene ring.     

The existence of ferrous ferricyanide

Evidence in the literature on the synthesis of ferrous ferricyanide is critically discussed. Pyrolysis and pressure effects on Prussian Blue lead to ferrous ferrocyanide together with decomposition by-products, and not to ferrous ferricyanide. The latter compound could be a precursor in the formation of Turnbull's Blue or an excited state of Prussian Blue, but it is not a stable chemical species.     

Wirkungsgrade in der Welt des Lebens und der Technik

Zusammenfassung Um der oft gehörten Meinung entgegenzutreten, die energetischen Wirkungsgrade lebender Organismen seien wesentlich höher als die technischer Verfahren, werden entsprechende Werte miteinander verglichen. Der sehr niedrige Wirkungsgrad der Photosynthese zusammen mit der kleinen Energiedichte der Sonnenstrahlung erzwang ab einer kritischen Größe die Aufspaltung in Energiesammler, die Pflanzen, und Verbraucher chemischer Energie, den Tieren. Dank den 10 mal höheren Wirkungsgraden in der Technik, lassen sich Solarmobile bauen, die von der auf sie fallenden Sonnenstrahlung angetrieben werden. Wegen des Multiplikationsgesetzes der Teilwirkungsgrade ergeben sich sowohl für die Speicherung der Sonnenenergie in den fossilen Brennstoffen wie in der Nahrungskette extrem niedrige Wirkungsgrade.

---

Efficiencies in the world of life and in engineering

One often hears the opinion, that the efficiencies in the world of life are higher than in engineering. To disprove this, many values of efficiency of corresponding processes are compared. The very low efficiency of photosynthesis in living plants together with the low density of solar radiation has led the world of life to split into collectors of energy, the plants, and consumers of chemical energy, the animals. Thanks to the ten times higher efficiencies of solar cells, it is possible, to produce solar mobiles, vehicles that move driven by solar radiation.

---

---

Herrn Prof. Dr.-Ing. U. Grigull zum 75. Geburtstag gewidmet