Injection and transport of electric charge in a metal/copolymer structure

The dynamical processes of the electric charge injection and transport from a metal electrode to the copolymer are investigated by using a nonadiabatic dynamic approach. The simulations are performed within the framework of an extended version of the one-dimensional Su-Schrieffer-Heeger (SSH) tight-binding model. It is found that the electric charge can be injected into the copolymer by increasing the applied voltage. For different structures of the copolymer, the critical voltage biases are different and the motion of the injected electric charge in the copolymer varies obviously. For the copolymer with a barrier-well-barrier configuration, the injected electric charge forms a wave packet due to the strong electron-lattice interaction in the barrier, then comes into the well and will be confined in it under a weak electric field. Under a medium electric field, the electric charge can go across the interface of two homopolymers and enter into the other potential barrier. For the copolymer with a well-barrier-well configuration, only under strong enough electric field can the electric charge transfer from the potential well into the barrier and ultimately reach a dynamic balance.     

γ radiation caused graphene defects and increased carrier density

We report on a micro-Raman investigation of inducing defects in mono-layer, bi-layer and tri-layer graphene by γ ray radiation. It is found that the radiation exposure results in two-dimensional (2D) and G band position evolution with the layer number increasing and D and D' bands rising, suggesting the presence of defects and related crystal lattice deformation in graphene. Bi-layer graphene is more stable than mono- and tri-layer graphene, indicating that the former is a better candidate in the application of radiation environments. Also, the DC electrical property of the mono-layer graphene device shows that the defects increase the carrier density.     

A New Method for Generating Hydrogen from Water

A new method for generating hydrogen by the reaction of Al powder with water using iodine as additive is developed. 12 can penetrate through the surface oxide layer on aluminium to form AlI3. High solubility of AlI3 in water is benefited to activate Al surface. It is found that the production of hydrogen becomes significant above 60℃ and obeys a logarithm rule. The pH value which is determined mainly by the kinetics of hydration spontaneously. varies from 5 to 3 then back to 4.5 during the reaction, reaction of AlI3 and the reaction of Al and HI produced     

加速溶剂萃取-液相色谱-质谱/质谱法分析动物组织中的壬基酚、辛基酚和双酚A

建立了测定内分泌干扰物质烷基酚、双酚A的液相色谱-电喷雾串联质谱(负离子模式)分析方法,优化了样品前处理方法。以二氯甲烷作提取溶剂,采用加速溶剂萃取法萃取动物组织样品,萃取液用500 mg OASIS氨基固相萃取柱进行浓缩净化。对流动相组分和流动相添加剂对质谱的离子化效率进行了考察,测得3种化合物在高、中、低3个添加水平的回收率为88%~101%,相对标准偏差小于15%;双酚A、壬基酚和辛基酚的方法检出限分别为0.3, 0.05和0.1 μg/kg。对从北京市场上采集的27份动物组织样品进行检测,结果表明壬基酚广泛存在于各种动物源性食品中,检出含量为0.49~55.98 μg/kg,其中鱼肉组织中都检出壬基酚,而且其含量也较高(9.13~55.98 μg/kg)。     

磷钨酸插层MgAl水滑石层间距的调变及催化酯化脱酸性能

通过改变离子交换温度和时间合成了具有不同层间距的磷钨酸(H_3PW_(12)O_(40),HPW)插层MgAl水滑石(LDHs),采用XRD、FT-IR、Raman、~(31)P MAS NMR、ICP-AES和Hammett指示剂-正丁胺滴定法等表征其性质,并研究其对模型原油的催化酯化脱酸性能。高的离子交换温度有利于形成较大的层间距(d_(003)约1.46 nm),较长的交换时间有利于形成较小的层间距(d_(003)约1.05 nm)。不同的层间距源自HPW在层间不同的存在形式,P_2W_(18)O_(62)~(6-)以C_2轴倾斜于层板和PW_(11)O_(39)~(7-)以C_2轴垂直于层板的方式排列于层间时,形成d_(003)约1.46 nm的层间距;PW_(12)O_(40)~(3-)与层板发生嫁接,并以C_2轴垂直于层板的方向排列于层间时,形成d_(003)约1.05 nm的层间距。层间P_2W_(18)O_(62)~(6-)和PW_(11)O_(39)~(7-)能产生更高比例的中强酸中心,同时大的层间距有利于反应物扩散进入层间与酸中心接触,能够提高LDHs的催化酯化脱酸性能。     

苯基荧光酮在表面活性剂体系中同时测定铜、锌

在溴代十六烷基三甲胺存在下同时测定了Cu^2 和Zn^2 ,找出了最佳实验条件,对水样和健康人体的冻干血浆测定结果满意。     

缝洞型油藏波动和流动耦合模型井底压力分析

缝洞型油藏储集介质包括基质、裂缝和溶洞.在缝洞型油藏的研究中,由于其复杂的孔隙结构和流动机理,裂缝 溶洞 基质之间的相互作用通常被简化为粒间窜流,然而实际地层中如果溶洞体积很大,会导致流动过程中压力变化很大,所以溶洞并不能被简化为一种介质.通过联立力学三大守恒方程,洞中的压力是以波的形式在溶洞中传播（类似于一种压力降的形式）的理论首次被提出,进而形成了波动和流动耦合的缝洞型油藏新的试井模型,并与外部地层渗流方程相结合形成新的完备的控制方程组,再通过Laplace变换和数值反演,得到了井底压力及压力导数的双对数曲线典型图版.结果表明,井底压力曲线形态受流动和波动相关的无量纲参数以及与外部地层性质有关的无量纲参数的影响,针对各个参数进行了敏感性分析.同时与新疆油田的某实例井相拟合,发现曲线拟合效果很好,地质解释结果与实际结果符合.     

卟啉-金属氧簇超分子化合物的光谱及电催化氧还原

应用紫外可见吸收光谱研究了meso 四(4 N 苄基吡啶基)卟啉(MTBPyP4＋,M=H2,Zn)阳离子与金属氧簇阴离子(SiW12O4－40)在水溶液中的光谱行为. 光谱演变及Job图表明MTBPyP4＋与SiW12O4－40在水溶液中可形成稳定的1∶1的超分子化合物. 同时本文还考察了化学计量为1∶1的[CoTBPyP][SiW12O40]超分子化合物的电催化分子氧还原行为, 表明该类超分子化合物有望成为一类新的催化氧还原的修饰电极材料.     

Snapshot imaging spectrometer based on a microlens array

This Letter proposes a snapshot imaging spectrometer, which obtains the spectral information and spatial information in one shot. The device proposed can achieve the data cube size of 21 × 29 × 40 in the waveband of400–800 nm. The core element of this system is the microlens array, which contains 60 × 60 microlenses in a square arrangement, each microlens has an aperture of 125 μm× 125 μm, and the F number is 15. The microlens array is mounted in a rotation mount, which provides 360° of rotation around the optical axis to maximize the spectral resolution. The final resolution of the system is about 10 nm.     

焙烧层状氢氧化镁铝对水中氟离子的吸附性能

研究了焙烧层状氢氧化镁铝(CLDH)对水中氟离子的吸附性能,考察了焙烧温度、吸附时间、吸附剂用量、溶液pH值等条件对吸附的影响.发现在较宽的pH(5.5～9.5)值范围内,CLDH对水中氟离子具有良好的吸附能力,室温下0.2gCLDH可将50mL浓度为15mg/L氟离子溶液处理为符合含氟标准的饮用水.吸附平衡符合Langmuir方程,在60min内达到饱和吸附,室温下饱和吸附量为22.64 mg/g.吸附饱和后的CLDH焙烧再生,循环使用5次后饱和吸附量为10.37 mg/g.