Development and prospects of initial alignment method for strap-down inertial navigation system北大核心CSCD

Initial alignment technology is directly related to the navigation accuracy and startup time of the strap-down inertial navigation system (SINS), and has always been regarded as a challenging focal point in the research field of inertial navigation. This paper makes a comprehensive survey of SINS initial alignment technology, briefly introduces the basic principles of initial alignment without latitude, coarse alignment with known latitude and precise alignment, and points out their advantages, disadvantages and applicable conditions. The research and effects of existing initial alignment error suppression techniques are then analyzed and discussed. Finally, according to the problems of existing initial alignment methods and the development requirements of the carrier, the future research direction of SINS initial alignment technology is predicted. © 2022 Journal of Clinical Hepatology. All rights reserved.     

Influence of initial heeling angle on ship roll motion response北大核心CSCD

[目的]系统地研究初始横倾角对随机横浪下船舶横摇运动响应的影响。[方法]以路径积分法为基础,通过数值求解控制横摇运动微分方程概率属性的Fokker-Planck方程,得到横摇运动响应的概率分布。[结果]结果显示,初始横倾角对船舶横摇运动响应谱的影响有限,但对横摇角概率分布以及横摇运动响应极值分布的影响十分明显,且会造成船舶安全性的显著恶化。[结论]路径积分法可作为研究随机海浪下船舶横摇运动特性的有效数值方法。     

公共自行车使用时空特性挖掘及租还需求预测

基于宁波市公共自行车刷卡数据、POI(Point of Interest)数据、气象和空气质量等数据，从数据驱动视角，深入挖掘公共自行车使用的时空特征及站点租还车需求预测。在时间上，采用KMeans算法，将站点聚为5类，探讨各类站点的时变需求规律及影响因素；在空间上，提出基于POI 数据的站点用地类型识别方法，将站点分为居住类、交通设施类、办公类和商业休闲类。构建以 15，30，60 min 为间隔，以租还车需求为目标变量的随机森林预测模型，并与常用的 BP (Back Propagation)神经网络、K最近邻方法进行比较。结果表明，随机森林模型的精度更高，适用性更强。以30 min为间隔的站点租还车需求预测精度最高，考虑站点土地利用类型后能有效提高模型的预测精度。本文结果可作为未来站点平衡调度的依据并推广应用于共享单车系统，为改善服务水平提供技术和理论支撑。     

Widening the Panama Canal and U.S. ports: historical and economic impact analyses

ABSTRACT

The economic history of the U.S. illustrates how the role of many cities has been changed by being seaports or located on navigable rivers or lakes. Based on the widening of the Panama Canal in 2016, the West Coast ports that include the west coast seaports of California, Oregon, and Washington were expected to become less important, while the freight shares of the East Coast and Gulf ports would increase. By how much it has been not easy to measure or predict so far, but this study attempted to define some of the key parameters in the measurement. As well as several relevant background topics, both the demand- and supply-side versions of the National Interstate Economic Model, have been applied for the measurement of economic impacts. U.S. port authorities and policy makers at the local and national levels who respond and develop plans for coping with the new realities of the Panama Canal are able to understand the extent to which changes in shippers’ and land-mode transporters’ behaviors would undermine the logistics and the costs of their activities. Therefore, this study is important for a diverse spectrum of port development strategies in the U.S. to respond to the Canal expansion.     

表面选区强化对钢轨波磨处轮轨滚动接触行为的影响

层流等离子体表面强化技术可大幅提高钢轨表面的硬度和耐磨性。为了揭示强化处理对轮轨滚动接触行为的影响,建立同时考虑钢轨表面选区强化和短波波磨的三维轮轨瞬态滚动接触有限元模型,数值计算了车轮高速滚过一个波磨周期的轮轨力、接触斑黏滑分布和残余应力应变。对比发现:表面选区强化对轮轨力和接触斑黏滑分布的影响较小,不影响钢轨承载性能;对钢轨表面残余应力应变分布的影响明显,残余应力主要集中在屈服强度较高的强化斑内而残余应变主要集中在韧性较好的基体材料上,表面选区强化有效结合了强化斑和基体材料的力学性能,形成了一种强韧的良好匹配。结果可为现场生产服务提供一定的理论指导和应用参考。     

Costs of air pollutants from shipping: a meta-regression analysis

ABSTRACT

This study estimated the external cost of air pollution from shipping by means of a meta-regression analysis, which has not been made before. Three pollutants, which were included in most of the primary studies, were considered: nitrogen oxides (NO_x), sulphur dioxides (SO₂) and particulate matters with a diameter of max 2.5 micrometres (PM_2.5). All primary studies included damages of health and a majority added impacts on agriculture and estimated the cost of air pollutants by transferring cost estimates from studies on costs of air emissions from transports in Europe. Different regression models and estimators were used and robust results were found of statistically significant emission elasticities of below one, i.e. total external costs increase by less than 1% when emissions increase by 1%. There was a small variation between the pollutants, with the highest elasticity for PM_2.5 and lowest for NO_x. Calculations of the marginal external cost of the pollutants showed the same pattern, with this cost being approximately six times higher for PM_2.5 than for the other pollutants. Common to all pollutants was that the marginal external cost decreases when emission increases. Another robust result was a significant increase in the cost of studies published in journals compared with other publication outlets. These findings point out some caution when transferring constant external unit cost of air pollutant from shipping, which is much applied in the literature, and the cost functions estimated in this study could thus provide a complementary transfer mechanism.     

货车自动驾驶技术及标准法规发展分析

目前,自动驾驶技术在乘用车领域已获得突破性发展;为提高通行效率和出行安全起到了极大的作用。自动驾驶技术在商用车领域的应用,有望较好解决高昂的人力成本和难以提高的效率等问题。然而,目前自动驾驶技术在货车的应用大多采用跟乘用车同样的标准进行规范,这在实际应用中存在着诸多的问题;例如,在FCW和AEB功能中货车在相同车速的制动距离要远大于乘用车,而其所采用标准规定的碰撞预警时间却并无多大不同,这在实际场景中存在着较大的安全隐患[1,2]。此外,货车质量和体积较大,且较多应用于长途运输,运输过程中会经历包括高温、严寒、山区等多种复杂气候场景,这些都将对货车自动驾驶技术在车辆制动效能、能耗以及多场景应用等方面提出更有针对性规范的要求。本文针对货车的应用场景特点,为其自动驾驶技术应用标准化提出了建议。