一种基于SRT-8算法的SIMD浮点除法器的设计与实现

在科学计算、数字信号处理、通信和图像处理等应用中,除法运算是常用的基本操作之一。基于SRT 8除法算法,设计一个SIMD结构的IEEE 754标准浮点除法器,在同一硬件平台上能够实现双精度浮点除法和两个并行的单精度浮点除法。通过优化SRT 8迭代除法结构,提出商选择和余数加法的并行处理,并采用商数字存储技术降低迭代除法的计算延时,提高频率。同时,采用复用策略减少硬件资源开销,节省面积。实验表明,在40nm工艺下,本设计综合cell面积为18601.9681 μm2,运行频率可达2.5GHz,相对传统的SRT 8实现关键延迟减少了23.81%。     

溶液结晶研究进展

本文综述了近期溶液结晶的研究进展及其在工业生产中的应用实例。     

Microstructure and Properties of Co2+: ZnAl2O4/SiO2 Nanocomposite Glasses Prepared by Sol–Gel Method

Transparent bulk Co²⁺: ZnAl₂O₄/SiO₂ nanocomposites containing nanocrystalline Co²⁺: ZnAl₂O₄ dispersed in silica glass matrix were obtained by the sol–gel method. The gels of composition 89SiO₂–6Al₂O₃–5ZnO− x CoO ( x =0.2, 0.4, 0.6, 0.8, 1.0) (mol%) were prepared at room temperature by using two different aluminum salts, aluminum nitrate and aluminum alkoxide (aluminum-iso-propoxide, Al(OPrⁱ)₃), as starting materials. The transparent gels were converted to the crystalline phase of gahnite by heating above 900°C. The microstructural evolution of gels was characterized. The effect of Co²⁺ concentration on spectroscopic properties was also discussed. Co²⁺: ZnAl₂O₄ nanocrystals dispersed in the SiO₂-based glass are formed at lower heat-treatment temperature and shorter heating time by using Al(OPrⁱ)₃ as raw material.     

Organo-zincate molten salts as immobilising agents for organometallic catalysis

The combination of 1-n-butyl-3-methylimidazolium chloride with ZnCl₂ affords ionic mixtures with different melting point temperatures depending on the zinc molar fraction. RuCl₂(PPh₃)₃ immobilised in the low melting mixture (60°C) promotes the 1-hexene hydrogenation (turnover frequencies up to 44 min^–1) and the recovered solid catalyst phase can be reused several times.     

Relationship of structure to properties of surfactants. 16. Linear decyldiphenylether sulfonates

The properties of some well-characterized sodium linear decyldiphenylether (C₁₀DPE)sulfonates have been studied. Among the properties investigated are dynamic and equilibrium surface tension, critical micelle concentration (CMC), area per molecule at the aqueous solution/air interface, wetting time by the Draves technique, foaming by the Ross-Miles method, solubilization, and hydrotropy. The decyldiphenylether moiety appears to be equivalent to a terminally substituted straight alkyl chain of 16 carbon atoms. The trialkyl- and dialkyl-mono-sulfonates have solubilities of < 0.01 g/dm³ in water, but are readily soluble in hexane. The didecyldiphenyl ether disulfonate (DADS) has a very low CMC value (1.0 × 10⁻⁵ mol dm⁻³) in aqueous 0.1 N Na⁺ solution (NaCl), characteristic of surfactants with two hydrophilic and two hydrophobic groups. It also has a much larger area per molecule at the aqueous solution/air interface than the monodecyldiphenyl-ether monosulfonate (MAMS) and a much higher surface tension at the CMC. MAMS has a much lower surface tension at a surface age of 1 second (γ_1s) than either DADS or the monodecyldiphenylether disulfonate (MADS). In agreement with γ_1s and γ_eq values, wetting times increase in the order: MAMS < DADS < MADS and initial foam heights decrease in the order: MAMS > DADS > MADS. Solubilization for three water-insoluble surfactants decreases in the order: DADS > MAMS > MADS, while hydrotropy is most pronounced with the disulfonates.     

Construction of a key-dependent message secure symmetric encryption scheme in the ideal cipher model

Key-dependent message （KDM） security is an important security issue that has attracted much research in recent years. In this paper, we present a new construction of the symmetric encryption scheme in the the ideal cipher model （ICM）; we prove that our scheme is KDM secure against active attacks with respect to arbitrary polynomialtime challenge functions. Our main idea is to introduce a universal hash function （UHF） h as a random value for each encrypfion, and then use s = h（sk） as the key of the ideal cipher F, where sk is the private key of our symmetric encryption scheme. Although many other schemes that are secure against KDM attacks have already been proposed, in both the ideal standard models, the much more significance of our paper is the simplicity in which we implement KDM security against active attacks.     

聚合度对纤维素表面性能的影响

根据Washburn浸渍理论和van Oss-Good-Chaudhury组合理论及应用柱状灯芯技术测试了具有不同聚合度(DP)的纤维素的表面性能,同时与已报道的纤维素的表面能进行了比较。结果表明:纤维素的表面能随分子量的增加而增大,但主要是其Lifshitz-van der Waals力在起主导作用。研究还发现纤维素的表面能γS与聚合度DP之间的关系大致可以描述为:γS=37.56+0.02 DP,而纤维素的极性率P与聚合度DP之间的关系则是一种非线性关系,如:P=11.88-0.02 DP+9.10 DP2。     

关于我国建卫瓷行业的几点思考

结合我国建筑卫生陶瓷行业发展的现状和当前国家产业政策,对影响行业发展的关键技术、环保节能以节约资源等问题进行了探讨,提出了相关建议。     

分批加分散剂时苯乙烯悬浮聚合瞬间液滴直径和分布

在苯乙烯悬浮聚合中研究了分批加分散剂体系磷酸三钙(TCP)或 TCP 和聚乙烯醇(PVA)时的加入方式对瞬间液滴大小和分布的影响。考察了体系液滴分散和合一的特点。实验观察到分批加入分散剂体系时液滴大小分布的变化规律,呈由单峰分布过渡到双峰分布,最后又发展为单峰分布。这与分散剂体系一次加入相比,后者仅出现单峰分布逐渐过渡到双峰分布。     

（Nb，Ti）C－Ni金属陶瓷的抗氧化性

用热等静压方法制备了（Ｎｂ，Ｔｉ）Ｃ－Ｎｉ金属陶瓷并作了８５０℃，９００℃，１０００℃及１１００℃下的等温氧化和室温～１１００℃的不等温氧化试验。在高温下，该金属陶瓷的表面被氧化成ＴｉＯ＿２，ＮｉＯ，ＮｉＴｉ＿３。认为Ｏ＿２通过氧化层向反应界面的扩散是控制氧化速率的主要步骤。氧化增重遵循抛物线规律，其激活能约为２３４ｋＪ／ｍｏｌ。