Preparation of Pb(Zr0.52Ti484848)O3 thin films on silicon-on-insulator substrates by excimer laser deposition combined with rapid thermal annealing

In this paper we report the fabrication of ferroelectric Pb(Zr_0.52Ti_0.48)O₃ (PZT) thin films on Si-on-Insulator (SOI) substrates with and without an electrode by pulsed excimer laser deposition combined with rapid thermal annealing. Based on the structural and interfacial characteristics analysis by X-ray diffraction (XRD), Rutherford backscattering spectroscopy (RBS), cross-sectional transmission electron microscopy (XTEM) and automatic spreading resistance measurement (ASR), the film structure and orientation were revealed to be dependent on the annealing time and annealing temperature as well as deposition temperature. From RBS spectra and XTEM observation it is shown that the PZT thin films did not interact with the top silicon layers of SOI and that the composition of the film was similar to the target. The ASR measurements showed that the electrical properties of PZT/SOI as well as PZT/Pt/SOI were abrupt, and that the electrical properties of the SOI substrates were still good after the PZT growth.     

New theorems for bianisotropic media

The general volume equivalence theorem for bianisotropic scatterers is presented, where the equivalent electric and magnetic currents are determined by a pair of coupled vector integral equations. Moreover, using the general volume equivalence theorem and conventional image principle, image theory is developed for a bianisotropic body over an infinite perfect electric or magnetic conducting ground plane.     

Non-steady-state model for kinetics of free radical polymerization, 4. Direct thermal initiation

This paper deals with the non-steady-state kinetics of direct thermal initiated polymerization. The initiation is assumed to be a bimolecular reaction of the monomer. The relationship between the radical concentration and the monomer conversion is rigorously derived. In further treatment a few very close approximations are introduced based on the fact that the number of monomer molecules reacting in the initiation step is much less than that consumed in the propagation step for a process producing high polymer, and the value of the rate constant for propagation or chain transfer is much lower than that for chain termination. Expressions for various molecular parameters, such as molecular weight distribution, number-average and weight-average degrees of polymerization, and dispersity, are given. Several numerical examples are provided.     

光纤模式噪声的研究

综述了光纤模式噪声的产生、计算，并介绍了减小它的一些方法。     

Tandem repeating of the expression cartridge--a novel strategy to enhance the expression efficiency of cloned gene in Escherichia coli

The aim of this study was to determine the actual prevalence of diabetes mellitus and to investigate the contribution of various risk factors to the diabetes mellitus among the population in a methyl mercury polluted area. The study was a population based cross sectional mass screening survey. A case-control study was designed to estimate the role of various risk factors including methyl mercury exposure for diabetes mellitus. The study was confined to a small rural town 10 km north of Minamata City; 1,087 persons older than 40 years were examined. Measurement of glucose metabolism was made on the basis of urine and haematological examinations. Data on risk factors were collected by questionnaire, and by measurement of body height and weight (obesity). The prevalence rate of the diabetes mellitus was 8.4% in males and 5.3% in females. The odds ratio of family history was significantly higher, 4.63. The odds ratio of residential history in a methyl mercury high polluted area was 0.58. The prevalence of the diabetes mellitus in this methyl mercury polluted area was not increased, contrary to what was expected based on the pathological findings.     

连续输出20WAlGaAs／GaAs量子阱激光二极管线列阵

采用ＭＯＣＶＤ实现了ＡｌＧａＡｓ／ＧａＡｓ量子阱结构，获得了连续输出２０Ｗ激光二极管线列阵，线列阵长度１．０ｃｍ，激射波长８０８±４ｎｍ。     

Long fiber reinforced polyamide and polycarbonate composites. II: Fatigue behavior and morphological property

Fatigue behavior and morphology of long glass fiber reinforced semicrystalline polyamide (nylon 6,6) and amorphous polycarbonate (PC) composites were investigated. The fiber length distribution in the molded samples was calculated by image analyzer. The tension-tension fatigue loading tests at various levels of stress amplitudes were studied. The two-parameter Weibull distribution function were applied to obtain the statistical probability distribution of experimental data. A good correlation existed between the experimental data and the Weibull distribution curves. Straight line S? N curves of long glass fiber reinforced semicrystalline polyamide and amorphous polycarbonate composites at various probabilities were established. The stiffness of the composite under tension-tension fatigue loading was measured. The thermal stress history was also investigated by thermo-imaging techniques during fatigue life testing. Further, failure morphology was examined by scanning electron microscopy (SEM). The results showed that the fracture behavior of the ductile damage in polyamide is different from the brittle damage in polycarbonate.     

A new approach to the optimization of robust antenna arrayprocessors

The authors present a method for solving a class of optimization problems with nonsmooth constraints. In particular, they apply the method to the design of narrowband minimum-power antenna array processors which are robust in the presence of errors such as array element placement, look direction misalignment, and frequency offset. They first show that the constrained minimum power problem has a unique global minimum provided that the constraint set is nonempty. Then it is shown how the design problem derived directly from considerations of the sensitivity of the antenna array processor to errors can be transformed into a quadratic programming problem with linear inequality constraints which can be solved efficiently by the standard active set strategy. They also present numerical results for two types of nonsmooth constraints developed to provided robustness. These results confirm the effectiveness of the method     

三氯乙烯与糠醛水溶液的液液平衡及萃取模拟计算

本文采用液液平衡釜了糠醛水溶液与三氯乙烯的液液平衡数据，用ＵＮＩＱＵＡＣ方程关联糠醛－水－三氯乙烯体系的液液平衡数据，以ＵＮＩＱＵＡＣ方程的模型，采用液液萃取法模拟计算糖醛和水的分离结果。