Synthesis of spherical core‐shell poly(vinyl acetate)/poly(vinyl alcohol) particles for use in vascular embolization: Study of morphological and molecular modifications during shell formation

Transarterial vascular embolization and chemoembolization has become common medical procedures, where partially hydrolyzed poly(vinyl alcohol) (PVA) beads remains as one of the most used embolic agent materials. Although synthetic, PVA cannot be synthesized by direct polymerization and must be obtained by chemical modification of another polymer, usually poly(vinyl acetate) (PVAc). The aim of the present work is to synthesize spherical core‐shell PVAc/PVA particles and study the morphological and molecular modifications during shell formation. The polymer particles where produced in two stages, where first the PVAc core was obtained by suspension polymerization of vinyl acetate (VAc) and then the PVA shell synthesized through hydrolysis. Spherical PVAc particles were successfully produced and isolated using an optimized suspension polymerization process. During the shell formation, it was shown that none of the conditions used affected the overall morphology of the particles although changes in the final size distribution could be observed. However, it was possible to identify the process variables and reaction condition that affect the molecular weight averages and polydispersities of the final copolymer. POLYM. ENG. SCI., 55:2237–2244, 2015. © 2015 Society of Plastics Engineers     

Improvement of mechanical performance of epoxy resins filled with cobalt and chromium powders

Epoxy/ powder metal composites have interesting electrical properties, becoming conductors above the percolation threshold. To complete this study, mechanical investigations have been carried out to show the influence of the fillers on the mechanical performance of these composites. In this framework, different epoxy/metallic powders (Cobalt, Chromium) composites were prepared. Scanning Electron Microscopy showed that the dispersion of the metallic fillers in the matrix is almost homogeneous. The dynamic mechanical thermal analysis (DMTA) measurements showed the dependence of the viscoelastic parameters with the frequency, temperature, nature, and content of fillers. The main relaxations observed are the primary α relaxation (associated to the glass transition, T_g) and a secondary β relaxation. A second DMTA run on the same samples showed a slight increase of the T_g. It clearly showed that the used metallic fillers improve the mechanical properties of the obtained composites. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Comparison of real‐time methods for maximizing power output in microbial fuel cells

Microbial fuel cells (MFCs) constitute a novel power generation technology that converts organic waste to electrical energy using microbially catalyzed electrochemical reactions. Since the power output of MFCs changes considerably with varying operating conditions, the online optimization of electrical load (i.e., external resistance) is extremely important for maintaining a stable MFC performance. The application of several real‐time optimization methods is presented, such as the perturbation and observation method, the gradient method, and the recently proposed multiunit method, for maximizing power output of MFCs by varying the external resistance. Experiments were carried out in two similar MFCs fed with acetate. Variations in substrate concentration and temperature were introduced to study the performance of each optimization method in the face of disturbances unknown to the algorithms. Experimental results were used to discuss advantages and limitations of each optimization method. © 2010 American Institute of Chemical Engineers AIChE J, 2010     

Physicochemical Properties of Garden Cress (<Emphasis Type="Italic">Lepidium sativum</Emphasis> L.) Seed Oil

Garden cress (Lepidium sativum L.) is an edible, underutilised herb, grown mainly for its seeds in India. Physicochemical properties, minor components (unsaponifiable matter, tocopherols, carotenoids), fatty acid composition and storage stability of garden cress seed oil (GCO) were studied. Cold press, solvent and supercritical CO₂ extraction methods were employed to extract the oil. The total oil content of garden cress (GC) seeds was 21.54, 18.15 and 12.60% respectively by solvent, supercritical CO₂ and cold press methods. The physical properties of GCO extracted by the above methods were similar in terms of refractive index, specific gravity and viscosity. However, cold pressed oil showed low PV and FFA compared to the oil extracted by other methods. α-Linolenic acid (34%) was the major fatty acid in GCO followed by oleic (22%), linoleic (11.8%), eicosanoic (12%), palmitic (10.1%) erucic (4.4%), arachidic (3.4%) and stearic acids (2.9%). Oleic acid (39.9%) and α-linolenic acid (42.1%) were the predominant fatty acids at the sn-2 position. The total tocopherol and carotenoid content of GCO was 327.42 and 1.0 μmol/100 g oil, respectively. The oil was stable up to 4 months at 4 °C. Tocopherol and BHT offered the least protection, while ascorbyl palmitate (200 ppm) offered the maximum protection to the oil, when subjected to the accelerated oxidative stability test. Thus GCO can be considered as a fairly stable oil with a high content of α-linolenic acid.     

Identification of the genetic variants of κ-casein in milk by isoelectric focusing electrophoresis

The genetic variants of κ-casein (κ-CN) A and B were analysed in milk from Holstein–Friesian (HF) and Jersey cows by means of isoelectric focusing (IEF) electrophoresis. Milk samples were obtained in triplicate from pure-breed HF and Jersey cows (three of each) to estimate the protein content, casein and purify κ-CN. The protein and casein contents in the milk from both breeds were statistically different ( P <  0.05). The κ-CN A migrates first with an isoelectric point (pI) of 7.2–7.3 and then B with a pI of 7.5–7.7. Differences in the expression proportion of both variants were detected.     

Accountability in Brazilian Governmental Software Project: How Chat Technology Enables Social Translucence in Bug Report Activities

Fixing software bug is part of the daily work routine in software engineering which requires collaboration and thus has been explored as a core CSCW domain, since the early inception of the research field. In this paper, we explore the use of chat technology in software engineering by analyzing the coordination between client and vendor in a large government software project in Brazil (Gov-IT). We collected our empirical material through face-to-face and online interviews, site and chat forums observations. Looking closely at the bug fixing activities within Gov-IT, we find that the client and the vendor use chat technology to coordinate their cooperative work by enabling the participants to monitor the availability of developers and the urgency of detecting bugs synchronously. This way, the chat technology made it possible for the client to report bugs and developers to resolve bugs in a timely manner. Moreover, the chat technology enabled the participants to request and share artefacts synchronously, making it possible to analyze and understand the contextual nature surrounding bugs faster than using the bug tracking system. Finally, the chat technology enabled participants in enacting commitment and interdependence across vendor and client, creating cooperative situations of mutual dependence. Our results suggest that we, as CSCW designers, must rethink the design of bug tracking systems and find new ways to re-configure systems, so they support the coordinative practices involved in detecting, analyzing, and resolving critical and severe software bugs synchronously.     

Transmission Fiber Chromatic Dispersion Dependence on Temperature: Implications on 40 Gb/s Performance

In this letter, we will evaluate the performance degradation of a 40 km high‐speed (40 Gb/s) optical system, induced by optical fiber variations of the chromatic dispersion induced by temperature changes. The chromatic dispersion temperature sensitivity will be estimated based on the signal quality parameters.