Complexation of plasmid DNA and poly(ethylene oxide)/poly(propylene oxide) polymers for safe gene delivery

Environmental Chemistry Letters - Gene delivery is the process of introducing foreign genetic material, such as DNA or RNA, into host cells. Gene...     

Broader range of inputs for technology choice

With costs of energy and materials increasing compared to other inputs in manufacturing, labour and capital can no longer be regarded as the only criteria for choice of appropriate technology. In the article below the authors offer a broader range of inputs and conclude that optimizing only labour and capital results in erroneous technology choices.     

Inorganic acid emission factors of semiconductor manufacturing processes

A huge amount of inorganic acids can be produced and emitted with waste gases from integrated circuit manufacturing processes such as cleaning and etching. Emission of inorganic acids from selected semiconductor factories was measured in this study. The sampling of the inorganic acids was based on the porous metal denuders, and samples were then analyzed by ion chromatography. The amount of chemical usage was adopted from the data that were reported to the Environmental Protection Bureau in Hsin-chu County according to the Taiwan Environmental Protection Agency regulation. The emission factor is defined as the emission rate (kg/month) divided by the amount of chemical usage (L/month). Emission factors of three inorganic acids (i.e., hydrofluoric acid [HF], hydrochloric acid [HCl], and sulfuric acid [H2SO4]) were estimated by the same method. The emission factors of HF and HCl were determined to be 0.0075 kg/L (coefficient of variation [CV] = 60.7%, n = 80) and 0.0096 kg/L (CV = 68.2%, n = 91), respectively. Linear regression equations are proposed to fit the data with correlation coefficient square (R2) = 0.82 and 0.9, respectively. The emission factor of H2SO4, which is in the droplet form, was determined to be 0.0016 kg/L (CV = 99.2%, n = 107), and its R2 was 0.84. The emission profiles of gaseous inorganic acids show that HF is the dominant chemical in most of the fabricators.     

Nanostructured semiconducting materials for efficient hydrogen generation

Massive production of hydrogen by water decomposition triggered by a solar light active photocatalyst is a major objective in chemistry and a promising avenue to overcome the global energy crisis. The development of efficient, stable, economically viable and eco-friendly photocatalysts for hydrogen production is a challenging task. This article reviews the use of nanocomposite in three combinations: metal oxide–metal oxide semiconductor, metal–metal oxide semiconductor and metal chalcogenide–metal oxide core–shell nanostructures. These core–shell structures occur in two forms: a simple form where the photocatalyst is either in the core or the shell or in a more complex system where the core–shell structure comprises a co-catalyst deposited on a semiconducting material. We discuss the design, synthesis and development of semiconductor-based nanocomposite photocatalysts for hydrogen production. The major points are the role of catalytic active sites, the chemical nature of sacrificial agents, the effect of light sources, the variable light intensity and the energy efficiency calculation. For TiO₂-based nanocomposites, the metal oxide or metal co-catalyst loading of 1.0–3.0 wt% was optimal. TiO₂ nanotube–CuO hybrid nanocomposites produce 1,14,000 µmol h^?1 \({\text{g}}^{ - 1}_{\text{cat}}\), whereas TiO₂/Au nanocomposites display 1,60,000 µmol h^?1 \({\text{g}}^{ - 1}_{\text{cat}}\). For core–shell catalysts, a shell thickness of 2–20 nm was found for the best activity, and its performance is as follows: (a) CdS–NiO system produces around 19,949 µmol h^?1 \({\text{g}}^{ - 1}_{\text{cat}}\) and (b) CuO–Cr₂O₃ as co-catalyst immobilized on TiO₂ system produces around 82,390 µmol h^?1 \({\text{g}}^{ - 1}_{\text{cat}}\).     

Municipal wastewater treatment using novel constructed soil filter system

The study gives a new approach for contaminant removal from municipal wastewater using constructed soil filter (CSF) and presents performance of two CSF units located in Mumbai, India. In this system, natural weathered rock is formulated which combines sedimentation, infiltration and biochemical processes to remove suspended solids and oxidisable organics and inorganics of the wastewater. Results show elevated dissolved oxygen (DO) levels, removal of COD (136-205 to 38-40 mg l(-1)) and BOD (80-125 to less than 12 mg l(-1)) suspended solids from 135-203 to 13-18 mg l(-1) and turbidity from 84-124 to 8-11 NTU, bacterial removal of 2.4-3.1 log order for Total coliform and Fecal coliform from site I which is almost 8 years old facility, and site II which is 3 years old. Estimated hydraulic retention time of 0.5-1.0 h, hydraulic loading of 0.036-0.047 m(3)m(-2)h(-1), no pretreatment, high DO levels in the effluent, no bio-sludge production, no mechanical aeration, low energy requirement (0.04 kW h m(-3)) and green aesthetic ambience are its unique features.     

Natural sunlight NO(3)(-)/NO(2)(-)-induced photo-degradation of phenylurea herbicides in water

The nitrate-induced photodegradation of phenylureas in water was demonstrated to occur efficiently using natural sunlight irradiation. The kinetics of disappearance was found to be dependent on the inducer and substrate concentrations, the phenylurea structure and the origin and composition of the aqueous matrix including the presence of nitrite. The measured effects under sunlight were of the same order of those measured previously in the lab using our solar light simulated system. However, by-product distribution might differ substantially particularly considering the nitration pathway.     

SARS-CoV-2 phase I transmission and mutability linked to the interplay of climatic variables: a global observation on the pandemic spread

The study aims to determine the impact of global meteorological parameters on SARS-COV-2, including population density and initiation of lockdown in twelve different countries. The daily trend of these parameters and COVID-19 variables from February 15th to April 25th, 2020, were considered. Asian countries show an increasing trend between infection rate and population density. A direct relationship between the time-lapse of the first infected case and the period of suspension of movement controls the transmissivity of COVID-19 in Asian countries. The increase in temperature has led to an increase in COVID-19 spread, while the decrease in humidity is consistent with the trend in daily deaths during the peak of the pandemic in European countries. Countries with 65°F temperature and 5 mm rainfall have a negative impact on COVID-19 spread. Lower oxygen availability in the atmosphere, fine droplets of submicron size together with infectious aerosols, and low wind speed have contributed to the increase in total cases and mortality in Germany and France. The onset of the D614G mutation and subsequent changes to D614 before March, later G614 in mid-March, and S943P, A831V, D839/Y/N/E in April were observed in Asian and European countries. The results of the correlation and factor analysis show that the COVID-19 cases and the climatic factors are significantly correlated with each other. The optimum meteorological conditions for the prevalence of G614 were identified. It was observed that the complex interaction of global meteorological factors and changes in the mutational form of CoV-2 phase I influenced the daily mortality rate along with other comorbid factors. The results of this study could help the public and policymakers to create awareness of the COVID-19 pandemic.

     

Geochemical evaluation and human health risk assessment of nitrate-contaminated groundwater in an industrial area of South India

Environmental Science and Pollution Research - The primary goal of this study is to evaluate the groundwater quality and conduct a non-carcinogenic risk assessment of nitrate contamination in an...