Morphology and breaking of latex particle deposits at a cylindrical collector in a microfluidic chamber

We report an analysis for the morphology and breaking behavior of deposits of spherical latex particles (1 and 3.6 μm in diameter) at a cylindrical collector in a microfluidic channel fabricated by soft-lithography. In-situ observation of particle deposition over a large range of flow rate conditions evidence the relationship between deposit morphology and mode of particle transport toward the collector. For low Pe?clet number (Pe), particle deposits are nearly uniform all over the collector surface except at the rear where particles do not attach. Upon increase of Pe, deposits gradually adopt a columnar morphology at the collector stagnation point. These results are qualitatively consistent with previously reported Monte Carlo simulations of deposits formation in stagnation point flow systems. However, these simulations fail to quantitatively predict the observed deposition at the rear of the collector for sufficiently high flow rate. Additional deposit breaking experiments together with numerical evaluations of particle flux around the collector suggest that such "anomalous" deposition at large Pe is significantly governed by concomitant detachment of deposited particles at the stagnation point and the presence of recirculation flow at the collector rear. Finally, kinetics of deposition are discussed in connection with particle size-dependence of deposit breaking features.     

Terpendole E and its Derivative Inhibit STLC‐ and GSK‐1‐Resistant Eg5

Terpendole E is first natural product found to inhibit mitotic kinesin Eg5, but its inhibitory mechanism remains to be revealed. Here, we report the effects of terpendole E and 11ketopaspaline (a new natural terpendole E analogue) on the Eg5–microtubule interaction and in several Eg5 mutants. 11‐Ketopaspaline is a shunt product from terpendole E, and it shows potent inhibitory activity against the microtubule‐stimulated ATPase activity of Eg5. Unlike other Eg5 inhibitors, such as S‐trityl‐L ‐cysteine (STLC) and GSK‐1, both terpendole E and 11‐ketopaspaline only partially inhibited Eg5–microtubule interaction. Furthermore, terpendole E and 11‐ketopaspaline inhibited several Eg5 mutants that are resistant to STLC (Eg5^D130A, Eg5^L214A) or GSK‐1 (Eg5^I299F, Eg5^A356T), but with the same extent of inhibition against wild‐type Eg5. Because Eg5^D130A and Eg5^L214A show cross‐resistance to most known Eg5 inhibitors, which bind the L5 loop, these results suggest that terpendole E and its analogues have a different binding site and/or inhibitory mechanism to those for L5 loop‐binding type Eg5 inhibitors.     

Selective catalytic reduction of nitrogen oxides with hydrocarbons over Zn–Al–Ga complex oxides

Selective reduction of NO with hydrocarbons was studied using metal oxide catalysts having a spinel structure. A Zn–Al–Ga complex oxide was found to be very active and selective for the catalytic reduction of NO with both C₃H₆ and CH₄. It was revealed that the role of oxygen at the initial stage of the reaction strongly depends on the reductants; oxygen is mainly used for NO oxidation to NO₂ in the reduction with CH₄, whereas it is used both for NO oxidation to NO₂ and oxidation of C₃H₆ to an active intermediate in the reduction with C₃H₆. This revised version was published online in July 2006 with corrections to the Cover Date.     

Novel CO2 Absorbents Using Lithium-Containing Oxide

We have discovered a series of lithium-containing oxides that immediately react with ambient carbon dioxide (CO₂) up to 700°C. The products react and return reversibly to the oxides at a temperatures higher than about 700°C. The absorption capacity surpasses that of other CO₂ absorbents by a factor of 10. Utilizing these absorbents, the possibility of a CO₂ separation system that operates at around 500°C is proposed. It is generally believed that a CO₂ separation process operable at temperatures higher than 500°C has the special benefit of a small energy penalty. Moreover, the absorption also proceeds at ambient temperature in the atmospheric environment. This property offers the possibility of many other applications, such as air cleaners or cartridges. Therefore, we think these materials have the potential to make a valuable contribution to the realization of CO₂ emission control.     

Thermal behaviors and flame‐retardancy of styrene–ethylene–butadiene–styrene–block copolymer containing various additives

The thermal behaviors and the flame‐retardancy of styrene–ethylene–butadiene–styrene–block copolymer containing various additives were studied. The combustion was measured by the Underwriter laboratory (UL) test and cone calorimeter test and thermogravimetric analysis and program‐mass spectroscopy were applied to analyze the thermal behaviors. The blend with halogen additives showed the best result in the UL test. However, the blend with red‐phosphorous was the best in the cone calorimeter test. As the styrene sequence in the copolymer tended to degradate at a lower temperature, the major scission products spouted out from the polymer surface originated from polystyrene. The shorter the ignition times of the blends with red‐phosphorous were, the lower the peak heat release rates were. It was an interesting phenomenon because it suggested that the chemical structure of the residue changed to more stable polymers. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 156–161, 2007     

Delamination growth mechanisms in woven glass fiber reinforced polymer composites under Mode II fatigue loading at cryogenic temperatures

The purpose of this research is to characterize the cryogenic delamination growth behavior in woven glass fiber reinforced polymer (GFRP) composite laminates subjected to Mode II fatigue loading. Mode II fatigue delamination tests were performed at room temperature, liquid nitrogen temperature (77 K) and liquid helium temperature (4 K) using the four-point bend end-notched flexure (4ENF) test method, and the delamination growth rate data for the woven GFRP laminates were obtained. The energy release rate range was determined by the finite element method. Microscopic examinations of the specimen sections and fracture surfaces were also carried out. The present results are discussed to obtain an understanding of the fatigue delamination growth mechanisms in the woven GFRP laminates under Mode II loading at cryogenic temperatures.     

Wireless Body Area Network Combined with Satellite Communication for Remote Medical and Healthcare Applications

Wireless Body Area Network (WBAN) is expected to play an important role in supporting medical and healthcare services with increased convenience and comfort. One main advantage of WBAN is that it enables automatic biosignal collection in real time which is essential in medical treatment and healthcare vigilance. To harmonize with the strong demands from both medical and healthcare societies, and information and communications technology industries, IEEE 802 Standard Committee set up a task group of TG15.6 to develop an IEEE wireless standard on WBAN. In this paper, we first review the main activities of TG15.6 with the updated status. Then, we present a prototype WBAN system that is implemented by using ultra-wideband technology. Multi-hop mechanism is adopted to guarantee reliable connection. Finally, we describe an experimental system that uses the developed WBAN system by combining with satellite communication in supporting remote medical treatment and healthcare. In case of less of medical resources such as in emergency, in rural or isolated areas, such a system is important in sending the corresponding biosignal to a remote hospital in real time to help patient management. The relative delay of WBAN data delivery via satellite is measured which is dependent on the satellite link capacity.     

Application of SPRT to an image data sequence for a remote monitoring system

Recently, remote monitoring camera systems have been widely used for security. In such systems, one important function is that the system automatically detects any change in the scenes from the monitoring cameras. In wireless remote monitoring camera systems, the images of the scenes are generally transmitted as compressed data (e.g., JPEG file), because of the capacity of the wireless channel. This article shows the automated detection of the change point in time-series data of compressed JPEG file quantity (Kbytes) from the monitoring camera by applying the sequential probabilistic ratio test (SPRT) and the Chow test, which is well known as a standard method for detecting structural change in time-series data.