Providing scalable NH-diverse iBGP route re-distribution to achieve sub-second switch-over time

The role of BGP inside an AS is to disseminate the routes learned from external peers to all routers of the AS. A straightforward, but not scalable, solution, is to resort to a full-mesh of iBGP sessions between the routers of the domain. Achieving scalability in the number of iBGP sessions is possible by using Route Reflectors (RR). Relying on a sparse iBGP graph using RRs however has a negative impact on routers’ ability to quickly switch to an alternate route in case of a failure. This stems from the fact that routers do not often know routes towards distinct next-hops, for any given prefix.In this paper, we propose a solution to build sparse iBGP topologies, where each BGP router learns two routes with distinct next-hops (NH) for each prefix. We qualify such iBGP topologies as NH-diverse. We propose to leverage the “best-external” option available on routers. By activating this option, and adding a limited number of iBGP sessions to the existing iBGP topology, we obtain NH-diverse iBGP topologies that scale, both in number of sessions and routing table sizes. We show that NH diversity enables to achieve sub-second switch-over time upon the failure of an ASBR or interdomain link. The scalability of our approach is confirmed by an evaluation on a research and a Service Provider network.     

Fabrication and operation limit of lead-free PTCR ceramics using BaTiO3–(Bi1/2Na1/2)TiO3 system

The electric properties of BaTiO₃–(Bi_1/2Na_1/2)TiO₃ (BT–BNT) solid solution ceramics were studied as a lead-free PTCR (positive temperature coefficient of resistivity) thermistor material usable over 130°C. For determining the maximum switching temperature T _s, the phase diagram of BT–BNT binary system was clarified. Two semiconductorization processes and their electric properties are described. The lanthanum(La)-doped BBNT ceramics sintered in air still showed dielectric behaviors, but the niobium(Nb)-doped ones had a low resistivity at room temperature, ρ _RT, on the order of 10³ Ωcm and showed a PTC behavior. Sintering under a low O₂ atmosphere produces BT–BNT ceramics with less than 10² Ωcm compared to those prepared in air. Our current research produced the BBNT ceramics with T _s values around 210°C by increasing the (Bi_1/2Na_1/2) content in the ceramics.     

Cylindrical linear pulse motor with interior permanent magnet mover

The advantages of the conventional cylindrical linear pulse motor (C-LPM), which has a ring permanent magnet between the A- and B-phase stators, are its simple magnet shape and small motor diameter; the disadvantages are the thrust imbalance resulting from the magnetic flux path of the outer poles being longer than that of the inner poles. This thrust imbalance decreases the pull-in thrust and increases the positioning error. In this paper, a new C-LPM with an interior permanent magnet mover which reduces this thrust imbalance is proposed. Steady and dynamic thrust are also examined and a magnetic equivalent circuit is discussed. It is shown that a C-LPM with an interior permanent magnet mover effectively improves the thrust imbalance and the dynamic thrust     

Wide-speed operation of interior permanent magnet synchronousmotors with high-performance current regulator

Interior permanent magnet synchronous motors can be applied to applications requiring wide-speed operation. The current vector control algorithm of an interior permanent magnet synchronous (IPM) motor for constant power operation over the base speed is proposed. As the available voltage controlling the armature current vector is small in the flux-weakening constant power region, the current vector sometimes becomes uncontrollable in transient operations because of the current regulator saturation. The high-performance current regulator is also proposed to improve the current responses in the flux-weakening region, which includes the decoupling current controller and the voltage command compensator. The control performances are confirmed by several drive tests with respect to the prototype IPM motor     

Point-spread function for a rotationally symmetric birefringent lens

Imaging properties of a birefringent lens, in which the fast (or the slow) axis is distributed in the radial direction whereas magnitude of birefringence varies as a quadratic function of the pupil radius, are investigated by calculating a point-spread function. It is found that the point image is analytically described by using the Lommel function as well as the zero-order Bessel function, and a localized intensity null surrounded by bright regions in all directions can be realized at a geometrical focus under certain conditions. The magnitude of birefringence that is tolerable in image formations is also discussed, assuming that the lens is applied to microlithography.     

Simultaneous three-dimensional step-height measurement and high-resolution tomographic imaging with a spectral interferometric microscope

A noncontact, nonmechanical scanning, wide-field spectral interference microscope is developed for simultaneous measurement of three-dimensional step-height of discontinuous objects and tomographic imaging. A superluminescent diode (SLD) is used as a broadband light source and a liquid-crystal Fabry-Perot interferometer (LC-FPI) as a frequency-scanning device. By means of changing the injection current to the SLD, the spectral profile of the SLD is equalized, and a constant light input to the interferometer is achieved over the entire frequency-scan range. The Fourier-transform technique is used to determine both the amplitude and the phase of spectral fringe signals. Three-dimensional height distribution of a discontinuous object is obtained from the phase information, whereas optically sectioned images of the object are obtained either from the amplitude information alone or from the combination of both the amplitude and phase information. Experimental results with submicrometer resolution are presented for both step-height measurement and tomographic sectioning.     

Stability of metal nanocomposites under heavy-ion bombardment of insulators

Optical transmission and ion-induced photon emission of SiO₂ (silica glass), LiNbO₃ and Al₂O₃ were measured during implantation of 60-keV Cu⁻ or Au⁻ ions. Conditions of stability of metal nanocomposites were determined and represented with the help of nonequilibrium phase diagrams. Formation of structures dynamically stable under ion bombardment diminished the efficiency of ion implantation for further accumulation of implants as in nanoparticles. Contributions from various radiation-induced processes (sputtering, radiation-induced diffusion, atomic collisions, electronic excitations, etc.) to formation of nanocomposites were evaluated.     

Optical nonlinearity of Cu:SrTiO3 composite fabricated by negative ion implantation

Optical nonlinearity and dispersion were studied for Cu nanoparticle composite. Negative Cu⁻ ions with 60 keV were applied for implanting into SrTiO₃ at a flux of 10 μA/cm² up to a total fluence of 1 × 10¹⁷ ions/cm². The steady-state optical spectrum of Cu-implanted SrTiO₃ showed a surface plasmon resonance resulting from the formation of nanoparticles. Transient transmission and reflection were measured by the pump–probe method with a femtosecond laser system. Optical nonlinearity originated from Cu:SrTiO₃ nanoparticle composite and from SrTiO₃ matrix overlap, in measured transient spectra. The nonlinear component of Cu:SrTiO₃ composite was extracted from the transient spectra with the difference of time response. Nonlinear dielectric coefficient and dispersion around the surface plasmon resonance were derived from extracted transient spectra. The dispersion was compared with a local electric field factor.     

Intra-body data transmission for the personal area network

Intra-body communication is a wireless means of exchanging information within a personal area network (PAN) between wearable electronic sensors and devices. The feasibility of intra-body communication is confirmed through several experiments on signal propagation within the human body, and a human phantom is designed and used to obtain reproducible results over repeated experiments. Based on the results of these experiments, a prototype transmission system is constructed using aluminum electrodes powered by 3 V DC and operating in the 10.7 MHz frequency modulation (FM) band. This prototype is demonstrated to be capable of transmitting analog signals through the human subjects in the presence of external noise. Digital data transmission at 9600 bps is also achieved using newly fabricated 10.7 MHz frequency shift keying (FSK) transmitter and receiver devices. The carrier frequency of 10.7 MHz is the intermediate frequency of FM radio receivers, meaning that the proposed system can make use of a wide selection of inexpensive, commercial radio frequency devices.     

Derivation of equivalents for dynamic security assessment

A method is described by which the order of interconnected power systems is reduced. When the system under study is composed of a main system and several subsystems connected to the main system, the method gives an equivalent model to each subsystem with far fewer generators, even when each subsystem is connected to the main system at more than one point. The paper also discusses the data that needs to be sent from each subsystem when it is expressed by a reduced-order equivalent model. A numerical example of a 250-bus and 61-machine system shows that the method is effective and causes no loss of accuracy. Although the proposed method provides an accurate reduced-order model, it is rather time-consuming, because it is based on the linearized dynamic equations of the system, and their eigenvectors are needed. This problem must be solved before practical use of the method can proceed.