Identifying network density and scale economies for Japanese water supply organizations

Within this analysis we determine the optimal size (that is, with the minimum average cost) of a water supply enterprise and reconsider the matter of scale economies, using sample data from Japanese water supply organizations. After surveying evidence from previous studies of scale economies in the water supply industry, we estimate cost functions with three different cost models: the log-linear, translog and translog with a hedonic function. We obtain the result that economies of network density do exist, but that there are slight diseconomies of scale at the sample mean point. The optimal size of a water supply organization would be one supplying a population of approximately 766,000 people. Received: 10 March 2000 / Accepted: 8 January 2001     

Adhesion between polymer surface modified by graft polymerization and tissue during surgery using an ultrasonically activated scalpel device

In the field of surgery, achieving adhesion between a polymer implant and tissue poses a challenge considering that suturing is not appropriate for the stability of such implants. An ultrasonically activated scalpel that generates heat by mechanical vibration and promotes adhesion between a polymer implant and native tissue by pressing the two materials together has very good potential for application in the field. To determine the type of polymer that is suitable for the purpose, we investigated polyethylene (PE) and polystyrene (PS) films, the surfaces of which were activated by corona discharge. Graft polymerization was then performed on the corona‐treated surfaces to vary their properties. The corona‐treated PE and PS films grafted with poly(acrylic acid), poly(methacrylic acid), poly(vinyl benzylacrylic acid), and poly(hydroxylethyl acrylate), respectively, adhered to the tissue when the ultrasonically activated scalpel was applied. The heat generated by the mechanical vibration and the applied pressure enabled the carboxyl or hydroxyl groups to bond with the proteins in the extracellular matrix. We therefore concluded that it was possible to integrate this technique in the development of new types of polymer devices that could be stably implanted in a living body. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40885.     

Dimeric C34 Derivatives Linked through Disulfide Bridges as New HIV-1 Fusion Inhibitors

C34, a 34-mer fragment peptide, is contained in the HIV-1 envelope protein gp41. A dimeric derivative of C34 linked through a disulfide bridge at its C terminus was synthesized and found to display potent anti-HIV activity, comparable with that of a previously reported PEGylated dimer of C34REG. The reduction in the size of the linker moiety for dimerization was thus successful, and this result might shed some light on the mechanism of the suppression of six-helix bundle formation by these C34 dimeric derivatives. Addition of a Gly-Cys(CH₂CONH₂)-Gly-Gly motif at the N-terminal position of a C34 monomeric derivative significantly increased the anti-HIV-1 activity. This moiety functions as a new pharmacophore, and this might provide a useful insight into the design of potent HIV-1 fusion inhibitors.     

Effects of steroid hormones on vascular functions

The purpose of this review is to present reported findings of effects of steroids on vascular function and to discuss the biological significance in vascular physiology and pathology. Steroid hormones play various roles in vascular functions through the specific receptor localized in the endothelium and underlying vascular smooth muscle cells (VSMCs). Estrogen replacement therapy in postmenopausal women is in general associated with a reduction in mortality from cardiovascular disease and the beneficial effects of estrogens are caused by modulation of lipid metabolism, expression of leukocyte adhesion molecules, and migration of VSMCs in the vascular wall. Estrogens also play a role as vasodilators through an increment in nitric oxide (NO) production in endothelium or modulation of calcium homeostasis in VSMCs. Some progestin molecules partially oppose the effects of estrogens on vascular functions, but striking differences exist among the types of molecules. Testosterone shows a vasorelaxant response, but detailed actions of androgens on vascular functions remain unknown. Glucocorticoids act on vasoconstriction through reduced prostacyclin production, increased alpha-adrenoceptor numbers, and inhibition of NO synthase, while mineralocorticoids induce hypertrophy and hyperplasia of VSMCs and perivascular fibrosis and cause peripheral vascular resistance, in addition to changes in vascular electrocyte permeability. Some rapid actions of steroids are mediated by "nongenomic" responses in vascular tissues. Recent studies have also demonstrated that steroid-producing or -metabolizing enzymes are expressed in the vascular wall, suggesting the local regulation of steroids in the vascular system. Thus, steroid hormones greatly influence vascular functions and an understanding of the mechanisms may provide new means to prevent vascular diseases.     

Enhanced catalytic activity of nanoshell carbon co-doped with boron and nitrogen in the oxygen reduction reaction

The use of carbon cathode catalysts in polymer electrolyte fuel cells instead of the current platinum catalysts is attracting increasing attention. We claim that two factors are important for enhancing the activity of carbon cathode catalysts in the oxygen reduction reaction (ORR): the formation of a nanoshell structure and co-doping with boron and nitrogen. Herein, we investigate the preparation and characterization of active ORR carbon catalysts that combine the above factors. Boron and nitrogen (BN)-doped nanoshell-containing carbon (BN-NSCC) was prepared by carbonizing a mixture of poly(furfuryl alcohol), cobalt phthalocyanine, melamine, and a trifluoroborane–methanol complex at 1000 °C. Transmission electron microscopy and X-ray photoelectron spectroscopy revealed the formation of nanoshell structures with distorted graphitic layers and the introduction of boron and nitrogen atoms, respectively. The ORR activity was evaluated in oxygen-saturated 0.5 mol dm^?3 H₂SO₄ using Koutecky–Levich analysis. The BN-NSCC showed an eight to ten times higher ORR activity than undoped NSCC, with an increased number of electrons participating in the reaction. Tafel analysis revealed a change in the rate-determining step caused by BN-doping. Thus, the combination of a nanoshell structure and co-doping with boron and nitrogen was found to improve the ORR activity of carbon catalysts.     

Development of a three-dimensional finite element model for a unidirectional carbon fiber reinforced plastic based on X-ray computed tomography images and the numerical simulation on compression

A unidirectional carbon fiber reinforced plastic (CFRP) was scanned by an X-ray computed tomography (CT) system. Based on the X-ray CT images, a three-dimensional model with random fiber waviness was developed. Each fiber location was identified in a sectional CT image. Subsequently, the relative displacement of fibers between adjacent sectional CT images was obtained with a digital image correlation method. This procedure was repeated to obtain fiber waviness along the axial direction. The constructed three-dimensional fiber model showed random waviness of each fiber in the unidirectional CFRP. Finite element analysis was performed using the three-dimensional model. Simulation results showed bending and twisting deformations coupled with axial contractions during axial compression, which developed due to fiber waviness. A reduction of the fiber directional Young’s modulus due to fiber random waviness was quantitatively evaluated.     

An efficient manufacturing method for I-shaped cross-sectional CFRP beam with arbitrary arrangement of carbon fiber using electro-activated resin molding

Abstract

The I-shaped cross-sectional beam of CFRP (CFRP I-beam) is usually manufactured by the continuous protrusion method. Carbon fibers can only be arranged in the longitudinal direction. The CFRP I-beam with arbitrary arrangement of carbon fiber was manufactured with applying the electro-activated deposition molding method. The carbon fiber fabric was immersed in the deposition solution and energized, epoxy resin precipitated around carbon fiber and impregnated. The resin-impregnated fabric was installed to the mold, and the CFRP I-beam was fabricated. The CFRP I-beam was subjected to three-point bending tests, and the relationship between load-deflection was simulated by finite-element analysis.     

In vitro bioactivity evaluation of nano- and micro-crystalline anodic TiO2: HA formation,cellular affinity and organ culture

Anodization is an easily viable technique useful for producing TiO₂ coatings on titanium substrates. Nano-crystalline anodic TiO₂ structure was produced on titanium at 20 V using 1 M Na₂SO₄ and 0.5% NaF and consolidated by a further heat-treatment. Micro-crystalline anodic TiO₂ was produced on titanium by applying a galvanostatic current density of 70 A/m² in water medium. To assess the usefulness of these nano- and micro-oxides for bone implant stability, physical properties and bone in vitro bioactivity including HA formation, cellular affinity and mouse-tissue morphogenesis, were evaluated. Bioactivity of the different anodic surfaces was evaluated by treating them in a simulated body fluid (SBF) to form hydroxyapatite (HA) and the rates of HA formation were compared. Deposits of HA could be seen on the nano-oxide surface within 7 days, whereas HA was detected only after 14 days on the micro-oxide surface. In vitro cell culture tests done using mouse osteoblasts indicated that the nano-oxides showed statistically significant cell activity than the micro-oxides and the machined titanium. Branching morphogenesis test done for 72 h on these surfaces showed more branching on the micro- and nano-oxides as compared with titanium surface.     

Optical and adhesive properties of composite silica-impregnated Ca-α-SiAlON:Eu2+ phosphor films prepared on silica glass substrates

The compaction of a Eu-doped Ca-α-SiAlON phosphor powder was performed by electrophoretic deposition (EPD). The effect on the adhesion and optical properties of the silica precursor as both a binder of the powder and a filler of the air voids were evaluated. The adhesion of the silica impregnated composite film to the silica glass substrate was characterized by the tape test. The improvement of the external quantum efficiency was confirmed from the PL spectra measurement after the silica impregnation. The temperature dependence of the external quantum efficiency was also investigated in order to discuss the advantage of using the silica precursor as a binder for high-brightness LED applications.