Effect of rolling temperature on microstructure and tensile properties of polypropylene

Rolling process was carried out with extruded polypropylene as crystalline polymer at various rolling temperatures, and the rolling characteristics, cross‐section morphologies, and tensile properties were investigated. The rolling characteristics were evaluated by springback and dimensional change. The springback increased with increasing rolling temperature. The increment of length was larger than that of width because of the influence of uniaxial drawing by rotation of the rollers. Uniform morphologies were observed at a rolling ratio of 70% and a rolling temperature of 23°C. In contrast, molecular orientation near the surface was higher compared with the inner part when rolled at 70°C. Furthermore, micro spherulitic structures were observed near the surface where recrystallization occurred because of the rising temperature on the specimen surface by friction. Therefore, different morphologies appeared near the surface and in the inner part. Tensile strength was obtained for the rolling direction when rolled at 110°C lower than at other rolling temperatures. It was likely that the molecular orientation was decreased by increasing the springback when rolled at high temperature. POLYM. ENG. SCI., 53:2573–2581, 2013. ©2013 Society of Plastics Engineers     

Chiral sensing system based on the formation of diastereomeric metal complex on a homocysteine monolayer using field effect transistor

A self-assembled monolayer (SAM) of l-homocysteine (l-Hcy) formed on the surface of a gold-deposited gate of a field effect transistor (FET) was used to differentiate between enantiomers of amino acids, for which the formation of diastereomeric metal complexes is fundamental for chiral discrimination. Here, we focus our attention on the dependence of the FET response on the analyte amino acids, the central metal ions involved in complex formation, and the solution pH. Using the l-Hcy SAM-modified gate with added Cu(II), notable negative FET responses were enantioselectively observed for the l-enantiomers of alanine (Ala), phenylalanine, and tryptophan, whereas differences in the FET responses between enantiomers were negligible for asparagine and aspartic acid. Regarding the enantioselectivity for Ala, the addition of Cu(II) was demonstrated to show higher selectivity as compared to other metal ions such as Co(II) and Ni(II). Moreover, for the addition of l-Ala and Cu(II), a particularly strong negative FET response was observed at pH 5.5.     

Effect of surface roughness and surface modification of indium tin oxide electrode on its potential response to tryptophan

The effect of surface modification of indium tin oxide (ITO) electrode on its potential response to tryptophan was investigated for ITO substrates with different surface roughness. It was found that a small difference in surface roughness, between ∼1 and ∼2 nm of R_a evaluated by atomic force microscopy, affects the rest potential of ITO electrode in the electrolyte. A slight difference in In:Sn ratio at the near surface of the ITO substrates, measured by angle-resolved X-ray photoelectron spectrometry and Auger electron spectroscopy is remarkable, and considered to relate with surface roughness. Interestingly, successive modification of the ITO surface with aminopropylsilane and disuccinimidyl suberate, of which essentiality to the potential response to indole compounds we previously reported, improved the stability of the rest potential and enabled the electrodes to respond to tryptophan in case of specimens with R_a values ranging between ∼2 and ∼3 nm but not for those with R_a of ∼1 nm. It was suggested that there are optimum values of effective work function of ITO for specific potential response to tryptophan, which can be obtained by the successive modification of ITO surface.     

Very high temperature annealing effect on amorphous carbon films grown on refractory oxide substrates by pulsed laser deposition

We have carried out very high temperature heat treatment at 1400–2700 °C of about 10 nm-thick amorphous carbon thin films deposited on refractory substrates MgO, Al₂O₃, and yttria-stabilized zirconia (YSZ) using pulsed laser deposition techniques. After the annealing, a few nanometer scale sp² crystallization of the films and a large corrugation with a height of more than 1 μm were observed by Raman spectroscopy analysis and optical/atomic force microscopes, respectively. The corrugation is probably caused by the formation of gases at the film/substrate interface during the heat treatment.     

Effect of silver content on thermal fatigue life of Sn-xAg-0.5Cu flip-chip interconnects

The thermal fatigue properties of Sn-xAg-0.5Cu (x=1, 2, 3, and 4 in mass%) flip-chip interconnects were investigated to study the effect of silver content on thermal fatigue endurance. The solder joints with lower silver context (x=1 and 2) had a greater failure rate compared to those with higher silver content (x=3 and 4) in thermal fatigue testing. Cracks developed in the solders near the solder/chip interface for all joints tested. This crack propagation may be mainly governed by the nature of the solders themselves because the strain-concentrated area was similar for tested alloys independent of the silver content. From the microstructural observation, the fracture was a mixed mode, transgranular and intergranular, independent of the silver content. Higher silver content alloys (x=3 and 4) had finer Sn grains before thermal cycling according to the dispersion of the Ag₃Sn intermetallic compound, and even after the cycling, they suppressed microstructural coarsening, which degrades the fatigue resistance. The fatigue endurance of the solder joints was strongly correlated to the silver content, and solder joints with higher silver content had better fatigue resistance.     

Effects of Spraying Ozonated Water on the Severity of Powdery Mildew Infection on Cucumber Leaves

Effects of spraying ozonated water on the severity of powdery mildew infection, visible disorder/injury occurrence, and net photosynthesis in cucumbers were investigated. The severity in the ozonated water treatment was contained to almost the same level throughout the 14-day period of the experiment, while the severity steadily increased in the non-treated control and distilled water treatment. Neither visible disorder/injury on the leaves nor a large difference in net photosynthesis between before and after spraying the ozonated water was observed. The results indicate that ozonated water can be at least a partial alternative to agricultural chemical fungicides for powdery mildew on cucumber leaves.     

Structural Defects Control the Energy Level Alignment at Organic/Organic Interfaces

The dependence of the energy level alignment (ELA) on structural defects at an organic/organic heterojunction (OOH) of perfluoropentacene (PFP)‐on‐diindenoperylene (DIP) was investigated using X‐ray scattering and ultraviolet photoelectron spectroscopy. The density of structural defects near the interface between the PFP and DIP layers was varied by changing the growth temperature of the DIP film. A direct relationship was found between the defect density and the ELA at the OOH; the ELA together with the change in the electrostatic potential (quasi‐interface dipole layer) at the OOH varies systematically with the defect density near the interface. This indicates that a key factor affecting the ELA is the electrostatic potential change across the OOH interface, which is produced by electron transfer from DIP occupied gap states to PFP unoccupied gap states. These gap states originate from the defects and are effectively controlled by adjusting the growth conditions of the organic films. As a result, the ELA at OOH interfaces can be controlled by the density of structural defect, which is important for organic devices employing OOHs, such as organic photovoltaic cells.     

950 keV, 3.95 MeV and 6 MeV X-band linacs for nondestructive evaluation and medicine

We are developing compact X-band linac X-ray sources for nondestructive evaluation and medicine. First, we develop a portable X-ray system by a 950 keV 9.4 GHz X-band linac to realize on-site inspection. We use a low power (250 kW) magnetron as an RF source for compactness of the whole system. Since the RF power source is quite small and the stored energy in the structure is also small, we faced the problem of beam loading and current/RF-power oscillation. We are analyzing the problem by the circuit model. We plan to use this system for erosion inspection of metal pipes of petrochemical complex. By adopting a side-coupling cavity design to avoid the oscillation, we have developed 6 MeV X-band (9.3 GHz) linac for pinpoint dynamic tracking cancer therapy. Furthermore, we are manufacturing 3.95 MeV X-band (9.3 GHz) linac X-ray source with flexible waveguides for on-site bridge inspection. Updated results and situations are presented.     

Modulation of nanotube formation in apatite single crystal via organic molecule incorporation

Hydroxyapatite materials are potentially useful for biomedical application, especially as vehicles for functional molecules. Structural control of bulk apatite materials, such as in the fabrication of hollow microspheres or porous structures, has been studied for this purpose. However, control of the internal structure of the source apatite crystal itself is still a challenge. Here, we show that small organic molecules incorporated in apatite crystals act as porogens which control the porous structure of apatite single crystal. The presence of amino acid under apatite synthesis conditions leads to firm bindings and encapsulation of the amino acid in apatite single crystals. Amino acid elimination by heating or electron beam irradiation enhances the pore formation in apatite single crystal. Moreover, incorporation of an acidic amino acid in apatite induces peapod like nanotubes in apatite single crystals. This study suggests the potential of using small organics for nano-structural control of apatite single crystals which would be valuable for enhancing drug loadings or modulating material digestion in vivo.     

Analysis of nonlinear transient responses of piezoelectric resonators

The electric transient response method is an effective technique to evaluate material constants of piezoelectric ceramics under high-power driving. In this study, we tried to incorporate nonlinear piezoelectric behaviors in the analysis of transient responses. As a base for handling the nonlinear piezoelectric responses, we proposed an assumption that the electric displacement is proportional to the strain without phase lag, which could be described by a real and constant piezoelectric e-coefficient. Piezoelectric constitutive equations including nonlinear responses were proposed to calculate transient responses of a piezoelectric resonator. The envelopes and waveforms of current and vibration velocity in transient responses observed in some piezoelectric ceramics could be fitted with the calculation including nonlinear responses. The procedure for calculation of mechanical quality factor Q(m) for piezoelectric resonators with nonlinear behaviors was also proposed.