Selective conversion of propane to propene by the catalytic oxidative dehydrogenation over cobalt and magnesium molybdates

Catalytic performances of various metal molybdates were tested in the oxidative dehydrogenation of propane to propene with molecular oxygen under an atmospheric pressure. Most of the molybdates tested promoted the selective oxidative conversion of propane to propene and among them cobalt and magnesium molybdates were found highest in the activity and selectivity. It was also found that their catalytic activities were highly sensitive to the catalyst composition, and it turned out that Co_0.95MoO _x and Mg_0.95MoO _x catalysts which have slightly excess molybdenum showed the highest activity in the oxidative dehydrogenation of propane. Under the optimized reaction conditions, higher reaction temperatures and lower partial pressures of oxygen, these catalysts gave 60% selectivity to propene at 20% conversion of propane. Since the molybdates having the surface enriched with molybdenum oxide tended to show high activity for the propane oxidation, surface molybdenum oxide clusters supported on metal molybdate matrix seem to be the active sites for the selective oxidative dehydrogenation of propane.     

Synthesis and Magneto-mechanical Properties of Ce-TZP/La M-Type Hexaferrite Composite

An in situ composite composed of ceria-stabilized tetragonal zirconia polycrystals (Ce-TZP) and La{Co_0.5Fe_0.5(Fe_0.9Al_0.1)₁₁}O₁₉ was synthesized from a powder mixture of Ce-TZP, La(Fe_0.9Al_0.1)O₃, Fe₂O₃, Al₂O₃, and CoO. The dense Ce-TZP dispersed with platelike La{Co_0.5Fe_0.5(Fe_0.9Al_0.1)₁₁}O₁₉ crystals as a second phase were formed after sintering from 1250° to 1350°C. The saturation magnetization of the in situ composite Ce-TZP/La{Co_0.5Fe_0.5(Fe_0.9Al_0.1)₁₁}O₁₉ was proportional to the mass fraction of the hexaferrite second phase in Ce-TZP. The coercivity of the composite with a 20 mass% of second phase decreased from 9.14 to 2.52 kOe (from 728 to 201 kA/m) after the pulverization of the composite. The susceptibility (χ) increased by 15%–25% under uniaxial stress on the composite. The change of the susceptibility (Δχ/χ) value increased with decreasing the mass fraction of the second phase in the composite. The Δχ was found to increase linearly with applied stress and abruptly change on cracking, which is expected for the application in fracture sensing of the composite.     

Plasma developable photoresist containing electronic excitation energy quenching system

A dry developable negative working resist composition comprised of poly(methyl isopropenyl ketone) (PMIPK) and 4-methyl-2,6-di(4′-azido-benzylidene) cyclohexanone-1 was examined. The main photochemical product formed in the resist pattern was found to be a secondary amine which crosslinks PMIPK. Post-annealing forms a hydrogen-bonded product which shows a powerful electronic excitation energy quenching effect. The quencher is more powerful than the aromatic compound arising from the azide by post-annealing only. The residual resist thickness of the negative pattern is about 80 percent of the initial thickness of the coating in spite of all the azide compound remaining in the resist coating. The obtained dry developed resist pattern has a high dry etch resistance. Etchings of Si and SiO₂ were performed by plasma and reactive ion etching, respectively.     

Thermal Response and Oxidation of Tyranno™-Fiber-Reinforced Si-Ti-C-O Matrix Composites for a Thermal Protection System in High-Enthalpy Dissociated Air

The thermal response and oxidation of Tyranno™ Lox-M fiber-reinforced Si-Ti-C-O matrix composites in high-enthalpy dissociated air was investigated in an arc jet facility (an arc wind tunnel). The maximum surface temperature reached 1310–1670°C. Catalytic recombination of oxygen and nitrogen on the composite surface under dissociated air was not significant. Surface recession was insignificant below 1600°C surface temperatures and above 5 kPa of oxygen partial pressure at the stagnation point. Passive-to-active oxidation transition of the composite agreed with Balat's theory for monolithic silicon carbide. A glass sealant prevented active oxidation of the composite for short-time exposures.     

Fabrication of large area diffraction grating using LIGA process

X-ray imaging is a very important technology in the fields of medical, biological, inspection, material science, etc. However, it is not enough to get the clear X-ray imaging with low absorbance. We have produced a diffraction gratings for obtaining high resolution X-ray phase imaging, such as X-ray Talbot interferometer. In this X-ray Talbot interferometer, diffraction gratings were required to have a fine, high accuracy, high aspect ratio structure. Then, we succeeded to fabricate a high aspect ratio diffraction grating with a pitch of 8 μm and small area using a deep X-ray lithography technique. We discuss that the diffraction gratings having a narrow pitch and an large effective area to obtain imaging size of practical use in medical application. If the pitch of diffraction gratings were narrow, it is expected high resolution imaging for X-ray Talbot interferometer. We succeeded and fabricated the diffraction grating with pitch of 5.3 μm, Au height of 28 μm and an effective area of 60 × 60 mm².     

Factors associated with serum magnesium and vascular stiffness in maintenance hemodialysis patients

Introduction : We evaluated the associated factors of serum magnesium in patients on maintenance hemodialysis (MHD). Furthermore, we evaluated the relationship between low serum magnesium and arteriosclerosis in these patients. Methods : In 129 patients on MHD, we evaluated the blood levels of magnesium, brachial‐ankle pulse wave velocity (ba‐PWV), ankle‐brachial index (ABI), and intima‐media thickness of the common carotid artery (IMT). Findings : In MHD patients, the serum level of magnesium was significantly correlated with age, calcium, TNF‐α, albumin, and ba‐PWV but not with ABI or IMT. In the multiple regression analysis, albumin (P = 0.0001, β = 0.31) and calcium (P = 0.029, β = 0.18) were selected as significant predictors of the magnesium level in MHD patients. Furthermore, the serum level of magnesium, as well as systolic blood pressure (P = 0.0001, β = 0.32) and age (P = 0.005, β = 0.25), were selected as significant (P = 0.012, β = ?0.22) predictors of ba‐PWV in MHD patients. Discussion : In MHD patients, the serum magnesium level was associated with the serum levels of calcium and albumin. Furthermore, a low serum magnesium level in MHD patients was associated with the index of vascular stiffness.     

Helium gas permeability of montmorillonite/epoxy nanocomposites

Helium gas permeability of silicate clay (montmorillonite) particles/epoxy nanocomposites was examined. The incorporation of increasing amounts of montmorillonite particles reduced the helium gas permeability. Based on Fick’s law, gas permeation behavior of the nanocomposite was evaluated. With the increase of montmorillonite loading, gas diffusivity decreased, while gas solubility increased. Helium diffusion behavior is in agreement to the numerical results based on the Hatta–Taya–Eshelby theory. It has been revealed that dispersion of nanoscale platelets in polymer is effective in improving gas barrier property.     

Rolling and swaying motion estimation for a mobile robot by using omnidirectional optical flows

Described here is a method for estimating rolling and swaying motions of a mobile robot using optical flow. We have proposed an image sensor with a hyperboloidal mirror for the vision-based navigation of a mobile robot. Its name is HyperOmni Vision. The radial component of optical flow in HyperOmni Vision has a periodic characteristic. The circumferential component of optical flow has a symmetric characteristic. The proposed method makes use of these characteristic to estimate robustly the rolling and swaying motion of the mobile robot. Correspondence to: Y. Yagi e-mail: y-yagi@sys.es.osaka-u.ac.jp     

Error estimation of recursive orthogonal polynomial expansion method for large Hamiltonian system

Recursive polynomial expansion method is an efficient scheme to evaluate Green functions for large systems without direct diagonalization of the Hamiltonian. It is based on a polynomial expansion of the Green function, and has many advantages compared with other methods. However, there are little reports on its error estimations. In this paper, the cut-off error of the method is estimated analytically, which results from the truncation of expansion at finite orders. It is found that the error is inversely proportional to the number of expansion order N except for the singular points for the system with point spectrum. For the system with continuous spectrum, the error is inversely proportional to N^3/2 and decreases much faster in terms of the expansion order.