Functionalized-radiolabeled hydroxyapatite/tenorite nanoparticles as theranostic agents for osteosarcoma

Hydroxyapatite (HA) nanoparticles (NPs) doped with different radioisotopes for use as theranostic systems play an important role in scientific research nowadays due to their ability to simultaneously act in the treatment and diagnosis of various types of cancers. In this work, we describe the synthesis and characterization of a hydroxyapatite/tenorite nanocomposite functionalized with folic acid, representing a nanotheranostic material with potential for application as an agent in positron emission tomography imaging systems and to act specifically in the treatment and diagnosis of osteosarcoma. ⁶⁴Cu and ³²P were produced by nuclear activation in the TRIGA reactor at CDTN. The obtained samples were characterized by XRD with Rietveld refinement, XAFS, SEM, BET, TGA, FTIR, CHN, ICP-AES, XPS and gamma spectroscopy. We investigated how CuO grows in HA NPs, the stability of the interactions between CuO and HA constituents and the interactions between folic acid and the surface of the HA NPs. The results indicate the formation of a second phase (tenorite) besides hydroxyapatite, and that the interactions between the two phases are stable, resulting in a nanocomposite. Furthermore, the activation of ⁶⁴Cu and ³²P inside the HA matrix, through the exposition to a neutron flux, produces a theranostic material of interest for biological tests.     

Influence of hydrodynamic instability on the heat transfer coefficient during condensation of R134a and R404A refrigerants in pipe mini-channels

This paper presents the results of an investigation of the influence of hydrodynamic instabilities on heat transfer intensity during the condensation of R134a and R404A refrigerants in pipe mini-channels. The heat transfer coefficient h is a measure of the effectiveness of the condensation process. It is particularly important to determine the value of the coefficient in the two-phase condensation area in a compact condenser. In other condenser areas (i.e., precooling of superheated vapor and subcooling of condensate), the heat efficiency is substantially smaller. Hydrodynamic instabilities of a periodic nature have an influence on size changes in these areas. A decrease in the heat transfer coefficient h in the two-phase area results in decreased intensity of the heat removal process in the whole condenser.The experimental investigations were based on the condensation of R134a and R404A refrigerants in horizontal pipe mini-channels with internal diameters of d = 0.64; 0.90; 1.40; 1.44; 1.92; 2.30 and 3.30 mm. Disturbances of the condensation process were induced with a periodic stop and a repetition of the flow of the refrigerant.In the range of frequencies, f = 0.25–5 Hz, of the periodically generated disturbances, an unfavorable influence on the intensity of the heat transfer during the condensation process in pipe mini-channels was identified. The reduction in the intensity of the heat transfer during the condensation process, which was induced with hydrodynamic instabilities, was presented in the form of the dependence of the heat transfer coefficient h on the vapor quality x and the frequencies f of the disturbances.The influence of the refrigerant, the diameter of the mini-channels and the frequency f on the damping phenomenon of the periodical disturbances in the pipe mini-channels was identified.     

Arduino-based slider setup for gas–liquid mass transfer investigations: Experiments and CFD simulations

The implementation of traditional sensors is a drawback when investigating mass transfer phenomena within microstructured devices, since they disturb the flow and reactor characteristics. An Arduino based slider setup is developed, which is equipped with a computer-vision system to track gas–liquid slug flow. This setup is combined with an optical analytical method allowing to compare experimental results against CFD simulations and investigate the entire lifetime of a single liquid slug with high spatial and temporal resolution. Volumetric mass transfer coefficients are measured and compared with data from literature and the mass transfer contribution of the liquid film is discussed.     

Aromatic Bis[aminomethylidenebis(phosphonic)] Acids Prevent Ovariectomy-Induced Bone Loss and Suppress Osteoclastogenesis in Mice

Osteoporosis is a skeletal disease associated with excessive bone turnover. Among the compounds with antiresorptive activity, nitrogen-containing bisphosphonates play the most important role in antiosteoporotic treatment. In previous studies, we obtained two aminomethylidenebisphosphonates—benzene-1,4-bis[aminomethylidene(bisphosphonic)] (WG12399C) acid and naphthalene-1,5-bis[aminomethylidene(bisphosphonic)] (WG12592A) acid—which showed a significant antiproliferative activity toward J774E macrophages, a model of osteoclast precursors. The aim of these studies was to evaluate the antiresorptive activity of these aminobisphosphonates in ovariectomized (OVX) Balb/c mice. The influence of WG12399C and WG12592A administration on bone microstructure and bone strength was studied. Intravenous injections of WG12399C and WG12592A bisphosphonates remarkably prevented OVX-induced bone loss; for example, they sustained bone mineral density at control levels and restored other bone parameters such as trabecular separation. This was accompanied by a remarkable reduction in the number of TRAP-positive cells in bone tissue. However, a significant improvement in the quality of bone structure did not correlate with a parallel increase in bone strength. In ex vivo studies, WG12399C and WG12592A remarkably bisphosphonates reduced osteoclastogenesis and partially inhibited the resorptive activity of mature osteoclasts. Our results show interesting biological activity of two aminobisphosphonates, which may be of interest in the context of antiresorptive therapy.     

New algorithms for power transformer inter-turn fault protection

In the paper new algorithms for detection of internal inter-turn faults in power transformers are described. Such faults are extremely difficult to detect since they induce negligible increase of the currents at the transformer terminals, although the currents flowing at the fault place are very high and dangerous for the transformer to be protected. The algorithms developed are based on the differential equation of the equivalent circuit of the transformer. In one version additional information from a CT installed inside of the triangle of delta side windings is used, which brings very promising results. Theoretical investigations are supported and illustrated with simulation studies performed both with MATLAB and EMTP-ATP programs.     

Optimal versus heuristic scheduling of surface mount technology lines

This paper presents and compares an exact and a heuristic approach for scheduling of printed wiring board assembly in surface mount technology (SMT) lines. A typical SMT line consists of several assembly stations in series and/or in parallel, separated by finite intermediate buffers. The objective of the scheduling problem is to determine the detailed sequencing and timing of all assembly tasks for each individual board, so as to maximize the line's productivity, which is defined in terms of makespan for a mix of board types. The limited intermediate buffers between stations result in a scheduling problem with machine blocking, where a completed board may remain on a machine and block it until a downstream machine becomes available. In addition, limited machine availability due to scheduled downtimes is considered. The exact approach is based on a mixed integer programming formulation that can be used for optimization of assembly schedules by using commercially available software for integer programming, whereas the heuristic approach is designed as a combination of tabu search and a set of dispatching rules. Numerical examples modelled after real-world SMT lines and some computational results are provided to illustrate and compare the two approaches.     

Influence of modified starches on properties of gluten-free dough and bread. Part II: Quality and staling of gluten-free bread

The aim of the study was to check the quality of gluten-free bread produced basing on the recipes, in which part of native starch was replaced with high amylose corn starch (HACS), acetylated distarch adipate (ADA), and hydroxypropyl distarch phosphate (HDP). The application 10 or 15% of chemically modified starches (HDP, ADA) caused the increase in volume of the obtained gluten-free loaves. The changes were accompanied by a decrease of average cell size, and an increase in their number. Due to the addition of modified starch crumb structure became more elastic, which was revealed in the results of stress relaxation. A slight decrease in hardness and chewiness of the crumb was also observed on the day of baking, and its extent depended on the level of modified starch, and was a little more pronounced in case of starch adipate. In comparison to the chemically modified starches, HACS deteriorated structural and mechanical properties of the crumb, which is probably related to their resistance to pasting and divergence in retrogradation pattern, where amylose component is more important than amylopectin.     

Changes in chemical composition during development of grass pea (Lathyrus sativus L.) seeds

The level of chemical components was determined in seeds of grass pea (Lathyrus sativus L.), cv. Krab, harvested at a dry matter content between 25.9 and 49.6 g/100 g of the raw material, and divided into five degrees of maturity. The results presented suggest that, in general, with an increasing maturity of seeds, the level of the following components increased if related to fresh matter: starch, dietary fibre, acids, total and protein nitrogen, total amino acids and sulphur amino acids, ash and its alkalinity, magnesium, calcium, total phosphorus and phytic phosphorus, and thiamine. The following components were reduced: vitamin C, riboflavin, carotenoids, beta-carotene, and chlorophylls. No such regularity could be found with respect to the accumulation of sugars, essential amino acids, and iron. By expressing the results in dry matter, increases were noted in starch, protein nitrogen, and thiamine. The content of sugars, total nitrogen, total amino acids, essential and sulphur amino acids, ash and its alkalinity, magnesium, phosphorus, vitamin C, riboflavin, carotenoids, beta-carotene, and chlorophylls were reduced while that of dietary fibre, iron, calcium, and phytic phosphorus varied.     

Characterization of reactively sputtered permeation barrier materials on polymer substrates

Transparent permeation barrier layers are not only used for food packaging but are also needed to encapsulate flexible electronic devices. Magnetron sputtering allows the deposition of high quality oxide barrier layers with a low water vapor and oxygen permeation. This paper compares different metal oxide layers which are deposited onto a polyethylene terephthalate (PET) film using a reactive dual magnetron sputtering process. The oxides of aluminum, silicon, titanium, zinc and a zinc-tin alloy are compared regarding their permeation barrier, structural and surface properties to determine the relationship between the layer structure and the gas permeation. Thereby, scanning electron microscopy (SEM) and atomic force microscopy (AFM) were used to characterize the morphology and surface structure of the layers and X-ray diffraction analysis (XRD) was used to determine the solid state phase.Cross-section images taken with SEM show a very compact structure for both aluminum oxide and zinc-tin oxide layers. These materials also have the lowest water vapor permeation compared to all other materials. Zinc oxide and titanium oxide layers both exhibit a columnar structure. Zinc oxide is polycrystalline and has a surprising low water vapor and oxygen permeation. In contrast to that the amorphous titanium oxide layers show a high water vapor and oxygen permeation which is not decreasing with an increasing layer thickness above 40 nm.