TESPI: Thermal Electric Solar Panel Integration

A photovoltaic panel with a heat extraction system is studied. The solution we suggest consists in superimposing a water layer on the PV panel: the water layer absorbs the infrared radiation leaving the visible part almost unaffected. This allows a good PV efficiency and heat production. This particular setup is called Thermal Electric Solar Panel Integration (TESPI) and it is discussed in detail both for the electric and the thermal part. The engineering problems are briefly analyzed and results of an experimental campaign are given. A definition of the global thermal-electric efficiency is given.     

On the Monitoring of Simple Linear Berkson Profiles

We consider the quality of a process, which can be characterized by a simple linear Berkson profile. One existing approach for monitoring the simple linear profile and two new proposed schemes are studied for charting the simple linear Berkson profile. Simulation studies demonstrate the effectiveness and efficiency of one of the proposed monitoring schemes. In addition, a systematic diagnostic approach is provided to spot the change point location of the process and to identify the parameter of change in the profile. Finally, an example from semiconductor manufacturing is used to illustrate the implementation of the proposed monitoring scheme and diagnostic approach. Copyright © 2012 John Wiley & Sons, Ltd.     

Bioactive glass–ceramic coated titanium implants prepared by electrophoretic deposition

Surface modification of Ti alloys towards an improved osteoinductive behaviour is one of the major challenges in orthopaedic implant technology nowadays. One way to achieve this is by applying a bioactive coating which can increase the rate of osseointegration and chemical bonding of surrounding bone to the implant. In the present work, the production of a bioactive glass–ceramic coating on flat Ti alloys by electrophoretic deposition is demonstrated. The coatings are applied by cathodic deposition from non-aqueous suspensions followed by sintering in vacuum, avoiding uncontrolled oxidation of the Ti substrates. The use of non-aqueous suspensions both allowed to reduce the deposition time and yielded homogeneous coatings with a uniform thickness of 8 μm. Evaluation of the coating adhesion confirmed the good mechanical performance of the coatings with a tensile bond strength of 41.0 ± 11.1 MPa. Additionally, a feasibility study demonstrated the potential of electrophoretic deposition as a coating technique for commercial complex implants.     

Tailoring materials properties of UFG aluminium alloys by accumulative roll bonded sandwich-like sheets

Accumulative roll bonding (ARB) as a method of severe plastic deformation is a well-established process to produce ultrafine-grained (UFG) sheet materials with extraordinary mechanical properties. In this work ARB is applied to combine different sheet materials in order to tailor the materials properties by producing sandwich-like structures. The high strength aluminium alloy AA5754, after 4 ARB cycles (N4), is used as a core material. To achieve high corrosion resistance and good visual properties, it is cladded with commercially pure aluminium AA1050A (N4) at room temperature and alternatively with AA6014 (N4) at 230 °C. All materials are UFG and satisfactory bonding between the different layers of aluminium alloys is achieved. Nanoindentation measurements reveal that there is a sharp transition in hardness at the interface. The yield and tensile strength of the core material are fully retained in the case of the AA6014/AA5754 sandwich. The strength of the AA1050A/AA5754 sandwich is slightly lower compared to the core material but still twice as high as the clad material. The serrated yielding effect which is strongly visible in tensile tests on the pure AA5754 alloy completely disappears in the sandwich sheets, which means the surface quality is strongly enhanced.     

Challenges when implementing BIM for industry change

Public clients have been identified as drivers of architectural, engineering and construction (AEC) industry change through their implementation of building information modelling (BIM). Yet, little is known of this implementation process and the associated challenges. This study aims to increase the understanding of what intra- and inter-organizational challenges that arise when a large Swedish public infrastructure client implements BIM to change the work practices of the actors in the Swedish AEC industry. The IT business value model allows for understanding the public client’s implementation of BIM as an IT-supported change process and for understanding the associated intra- and inter-organizational challenges. The findings show nine categories of intra- and inter-organizational challenges related to, for example, demanding BIM in procurement and creating incentives for BIM implementation. The findings show that intra-organizational challenges related to a top-down implementation of BIM, while inter-organizational challenges related to a bottom-up implementation. The impact of these challenges on the public client’s ability to drive AEC industry change by implementing BIM is discussed. The findings contribute with the client perspective to studies on BIM implementation and with an increased understanding of the challenges associated with implementing IT-supported change processes.     

Hydro energy potential of cooling water at the thermal power plant

The hydro energy of the gravity water flow from the coal-fired thermal power plant units to the river in an open cooling system of turbine condensers is determined. On the basis of statistical data for a long time period, the water net head duration curve due to the river annual level change, as well as the reduction of the hydro energy potential due to the thermal power plant overhauls periods, are evaluated in the case study of the Thermal Power Plant “Nikola Tesla B” in Serbia. A small hydro power plant is designed for the utilization of this hydro energy, and the economic benefits of the project are calculated. The internal rate of returns and pay back periods are calculated in dependence of the electricity price and total investment costs. The increase of profitability is assessed, bearing in mind that the plant might be realized as the Clean Development Mechanism project according to the Kyoto protocol. The obtained results show that the project is economically attractive, and it can be carried out with standard matured solutions of hydro turbines available at the market. Even for the relatively low electricity price from small hydro power plants in Serbia of 0.08 €/kW h the internal rate of return and the pay back period are 17.5% and 5.5 years.