Thiophene-containing poly(arylene-ethynylene)-alt-poly(arylene-vinylene)s: Synthesis, characterisation and optical properties

This work describes the synthesis and characterisation of two types of thiophene-containing poly(arylene-ethynylene)-alt-poly(arylene-vinylene)s (PAE-PAV) copolymers, whose repeating units (-Ph-CC-Th-CHCH-Ph-CHCH-)_n, 5, and (-Th-CC-Ph-CC-Th-CHCH-Ph-CHCH-)_n, 8a-c, consist, respectively, of a 1:2 and a 2:2 ratio of triple bond/double bond moieties. Comparison of their photophysical, electrochemical and photovoltaic properties has been carried out. Although similar electrochemical data (HOMO: −5.43 eV, LUMO: ∼−3.15 eV, ) as well as identical thin film absorption behaviour (λ_a=500 nm, ) were obtained for both types of materials, significant differences in their thin film photoluminescence behaviour and photovoltaic properties were observed. While polymer 5 shows a fluorescence maximum at λ_e=568 nm (with a fluorescence quantum yield of Φ_f=7%), a total fluorescence quenching was observed in 8. Far better photovoltaic performance was obtained from solar cells (set up: ITO/PEDOT:PSS/active layer/LiF/Al; active layer consisting of 5 or 8b as donor and PCBM as acceptor in a 1:3 ratio by weight) designed from 5 than from 8b. Open circuit voltage, V_OC, as high as 900 mV and power conversion efficiency, η_AM1.5, around 1.2% were obtained. This can be attributed to the 1:2 triple bond/double bond ratio as well as the grafting of shorter octyloxy and 2-ethylhexyloxy side chains in 5 and to its comparatively higher molecular-weight.     

Linker-based bio-compatible microemulsions

In this work we have studied the formulation of biocompatible microemulsions using lecithin as the main surfactant and bio-compatible linker molecules (hexyl polyglucoside asthe hydrophilic linker and sorbitan monoleate as the lipophilic linker). These bio-compatible systems are discussed as potential substitutes for chlorinated solvents in dry-cleaning applications and as solvent delivery systems for pharmaceutical applications. Formulation parameters and conditions were evaluated using isopropyl myristate (IPM) as the model oil. It was found that the proposed linker-based formulations were able to form alcohol-free microemulsions while achieving higher solubilization capacity than similar systems reported in the literature. In addition, these lecithin/linker formulations were able to form microemulsions with a wide range of oils, from polar chlorinated hydrocarbons to hydrophobic oils such as squalene. These microemulsions were achieved under isotonic conditions (0.9% NaCl) by only varying the relative proportions of the linkers. The "solvency" power of these bio-compatible formulations was tested for the removal of hexadecane (used as model oil) from cotton fabrics and compared to the solvency power of a typical dry cleaning solvent tetrachloroethylene (PCE). While PCE and the linker-based lecithin formulation removed the same amount of hexadecane at low loading ratios (less than 1% oil volume fraction), at higher loading ratios the linker-based lecithin formulation retained its oil removal capacity while the efficiency of the PCE system declined rapidly. These initial results thus demonstrate the remarkable oil solubilization capacity of these bio-compatible linker-based lecithin formulations and illustrate their potential as environmentally friendly replacements for organic solvents.     

新拌水泥浆体结构及其触变特性的探讨

本文采用“台阶”法测试触变性,研究了新拌水泥浆体结构与触变特性的关系,提出了定量表征浆体结构状态的新的触变参数A_i和A,探讨了“台阶”法触变性研究对实际工程的指导意义。     

《商业或工业用的蒸发型冷气机》标准制定的若干问题探讨

通过对我国干燥地区、沿海高相对湿度地区代表性城市典型气象年气象数据的分析,选定蒸发型冷气机干燥地区名义工况的干湿球温度为38℃/23℃,高相对湿度地区名义工况的干湿球温度为38℃/28℃.通过分析蒸发型冷气机的供冷量,采用等效处理方法得到了供冷量的计算方法,为标准的供冷量、能效比的计算和试验方法的确定提供了参考.     

生态语境下旧建筑改造的美学价值

该文通过对旧建筑改造的话语环境和价值基础的分析,探讨了旧建筑改造在生态语境下的美学特征,并进一步提出了功能、技术和社会文化三个审美层面,力图为环境时代建筑改造与设计创新提供评判的准则,从而为城市的有机更新建构旧建筑改造的审美价值体系。     

Effect of the surface texturing shapes fabricated using dry etching on the extraction efficiency of vertical light-emitting diodes

On the surfaces of GaN-based light-emitting diodes (LEDs) having an n-side-up vertical electrode structure formed by the laser lift-off, various shapes of photoresist-patterned surface textures were formed by inductively coupled plasma etching and their effect on the light emission efficiencies was investigated. By the formation of various shapes of surface textures, the light output efficiency was increased from 37% to 45% compared to that without surface textures. The increase of light output efficiency was related to the increase of sidewall scattering, the decrease of reflected loss, and the decrease of cavity wall effect that occurs for the vertical LEDs by the increase of sidewall surface area.     

Cholesterol Content and Methods for Cholesterol Determination in Meat and Poultry

Abstract: Available data for cholesterol content of beef, pork, poultry, and processed meat products were reported. Although the cholesterol concentration in meat and poultry can be influenced by various factors, effects of animal species, muscle fiber type, and muscle fat content are focused on in this review. Oxidative red muscles tend to have greater total lipid and cholesterol contents, although differences in the same types of muscles or cuts have been reported. Moreover, contradictory results among various studies suggest that unless there are pronounced changes in muscle structure and composition, cholesterol content is unlikely to be affected. Second, multiple issues in cholesterol analysis, including sample preparation, detection, and quantification, were evaluated. Cholesterol content of meat and poultry has been determined mostly by colorimetry and chromatography, although the latter has become predominant because of technological advances and method performance. Direct saponification has been the preferred method for hydrolyzing samples because of cost‐ and time‐effectiveness. The extraction solvent varies, but toluene seems to provide sufficient recovery in a single extraction, although the possible formation of an emulsion associated with using toluene requires experience in postsaponification manipulation. The most commonly used internal standard is 5α‐cholestane, although its behavior is not identical to that of cholesterol. Cholesterol can be analyzed routinely by gas chromatography (GC)‐flame ionization detector without derivatization; however, other methods, especially high‐performance liquid chromatography (HPLC) coupled with different detectors, can also be used. For research purposes, HPLC‐ultraviolet/Visible/photodiode array detector with nondestructiveness is preferred, especially when cholesterol must be separated from other coexisting compounds such as tocopherols. More advanced methods, such as GC/HPLC‐isotope dilution/mass spectrometry, are primarily used for quality control purposes.     

Quantum‐Tunneling Metal‐Insulator‐Metal Diodes Made by Rapid Atmospheric Pressure Chemical Vapor Deposition

A quantum‐tunneling metal‐insulator‐metal (MIM) diode is fabricated by atmospheric pressure chemical vapor deposition (AP‐CVD) for the first time. This scalable method is used to produce MIM diodes with high‐quality, pinhole‐free Al₂O₃ films more rapidly than by conventional vacuum‐based approaches. This work demonstrates that clean room fabrication is not a prerequisite for quantum‐enabled devices. In fact, the MIM diodes fabricated by AP‐CVD show a lower effective barrier height (2.20 eV) at the electrode–insulator interface than those fabricated by conventional plasma‐enhanced atomic layer deposition (2.80 eV), resulting in a lower turn on voltage of 1.4 V, lower zero‐bias resistance, and better asymmetry of 107.     

Robust Design of Dual‐Phasic Carbon Cathode for Lithium–Oxygen Batteries

Given that the performance of a lithium–oxygen battery (LOB) is determined by the electrochemical reactions occurring on the cathode, the development of advanced cathode nanoarchitectures is of great importance for the realization of high‐energy‐density, reversible LOBs. Herein, a robust cathode design is proposed for LOBs based on a dual‐phasic carbon nanoarchitecture. The cathode is composed of an interwoven network of porous metal–organic framework (MOF) derived carbon (MOF‐C) and conductive carbon nanotubes (CNTs). The dual‐phasic nanoarchitecture incorporates the advantages of both components: MOF‐C provides a large surface area for the oxygen reactions and a large pore volume for Li₂O₂ storage, and CNTs provide facile pathways for electron and O₂ transport as well as additional void spaces for Li₂O₂ accommodation. It is demonstrated that the synergistic nanoarchitecturing of the dual‐phasic MOF‐C/CNT material results in promising electrochemical performance of LOBs, as evidenced by a high discharge capacity of ≈10 050 mAh g^?1 and a stable cycling performance over 75 cycles.