Tensile properties and plastic deformation modes ofβ Zr-Nb alloys

Tensile properties and plastic deformation modes of zirconium-niobium alloys were investigated at 290 and 77 K in the wide composition range from metastable to stable phase. Three types of plastic deformation modes, {332}113 twinning, {112}111 twinning and slip, were observed depending on alloy composition and temperature. {332}113 twinning, which occurs in metastable zirconium alloys, is related to the stability of phase to decomposition and leads to low yield stress and large elongation. On the other hand, {112}111 twinning, which appears in stable zirconium alloys, results from high critical stress for slip due to solution hardening and high Peierls stress and does not affect tensile properties significantly. The results obtained for zirconium-alloys are similar to those for titanium alloys, strongly suggesting that {332}113 twinning is an important plastic deformation mode which is common to phase alloys containing athermal phase.     

In-place Algorithm for Erasing a Connected Component in a Binary Image

Removing noise in a given binary image is a common operation. A generalization of the operation is to erase an arbitrarily specified component by reversing pixel values in the component. This paper shows that this operation can be done without using any data structure like a stack or queue, or more exactly using only constant extra memory (consisting of a constant number of words of O(log n) bits for an image of n pixels) in O(mlog m) time for a component consisting of m pixels. This is an in-place algorithm, but the image matrix cannot be used as work space since it has just one bit for each pixel. Whenever we flip a pixel value in a target component, the component shape is also deformed, which causes some difficulty. The main idea for our constant work space algorithm is to deform a component so that its connectivity is preserved.     

Properties of Va metal-B films prepared by r.f.-sputtering

Ta_100-x B _x alloy films were prepared by r.f.-sputtering in the chemical composition range 45 x 77. Ta_100-x B _x (45 x 58) films consist of the amorphous phase, while the TaB₂ crystal phase was observed in Ta_100-x B _x (66 x 77) films. A remarkable preferred orientation with the (001) plane of TaB₂ parallel to the film surface was observed in Ta₃₄B₆₆. The d.c. electrical conductivity of Ta_100-x B _x (45 x 77) films decreases with increasing boron content in the range 6.7 × 10³ to 1.3 × 10^3–1 cm^–1. The micro-Vickers hardness of Ta_100-x B _x (45 x 77) films was in the range 2200 to 2600 kg mm^–2.     

Preparation of Co-N films by rf-sputtering

Co-N films in the wide compositional range can be prepared by reactive sputtering. Co-N sputtered films consist of one or two phases, such as CoN, Co₂N, Co₃N, Co₄N and -Co. Co₄N phase with a cubic unit cell is observed, and its lattice constant isa = 0.3586 nm. The preferred orientation is observed on the Co-N films, CoN (200) plane, Co₄N (1 1 1) plane and -Co (002) plane parallel to the film surface, respectively. Saturation magnetization _s of Co-N sputtered film decreases from 160 to 1.7 e.m.u. g^–1 with increasing content of N from 0 to 21.7 at%, and coercive force_I H _c is the range of 43 to 5000e at room temperature.     

Stability of protective oxide films in waste incineration environment—solubility measurement of oxides in molten chlorides

Solubility measurements of several oxides in molten NaCl-KCl and NaCl-KCl-Na₂SO₄-K₂SO₄ were conducted in three different levels of basicity. The dissolution behavior of the oxides showed almost the same tendency as that shown by the dissolution behavior of the oxides in molten Na₂SO₄ in literature. In a waste incineration environment, a protective Cr₂O₃ film easily dissolves in molten chlorides as CrO₄²⁻ because pO²⁻ of the molten chlorides tends to have a small value due to the effect of water vapor contained in the combustion gas. From the result of the solubility measurement, the addition of molybdenum and/or silicon was expected to improve the corrosion resistance of alloys. Laboratory corrosion tests confirmed this expectation. However, the scale analysis suggested that the effect of molybdenum could not be explained completely by only the mechanism derived from the result of the solubility measurement.     

A carboxyalkanethiol monolayer modified electrode for blocking of ascorbic acid oxidation and its application to a biosensor

Upon the application of amperometric biosensor to the biological fluid, ascorbic acid interferes the amperometric determination of analytes, because the oxidative potential of ascorbic acid is lower than that of electro active substances such as H₂O₂ produced by the enzymatic reaction. In this study we propose a method to block ascorbic acid based on the electrostatic interaction with self-assembled monolayer (SAM) and its application of the surface modified electrode to biosensor. In order to form SAM on the gold electrode with carboxyl group, 7-carboxy-heptanethiol (7-CHT) was used. The 7-CHT modified electrode did not show anodic response to ascorbic acid, but oxidized phenanthroline cobalt complex [Co(phen)₃²⁺], which can be used as a mediator of biosensor. Thus, the 7CHT-modified electrode was applied to biosensor mediated with Co(phen)₃²⁺. Fructose dehydrogenase (FDH) was immobilized to the 7-CHT modified electrode. Fructose was determined selectively with the FDH/7-CHT modified electrode at the range of 0.2-2 mM.     

Electron-microscopic procedure for acrylic rubber

The electron-microscopic visualization of acrylic rubber dispersed in a heterogeneous structural resin composition consisting of a rubber-modified two-phase plastic comprising essentially a butyl acrylate rubber phase and an acrylonitrile–styrene copolymer phase, respectively, has been accomplished. This procedure consists of the following: The molded resin specimen is treated with hydrazine hydrate solution to produce the acrylic acid hydrazides. Allow the treated specimen to soak in osmium tetroxide solution. The acrylic rubber may be indirectly fixed and stained. Some micrographs of ultrathin sections of two or three resin compositions, cut by an ultramicrotome, are presented.     

Influence of ammonium salt on electrowinning of copper from ammoniacal alkaline solutions

In order to develop an energy-saving copper recycling process from wastes, electrochemical measurements were conducted in ammoniacal alkaline solutions containing Cu(I) ions and an ammonium salt of sulfate, chloride or nitrate. The results of each system were then compared. The polarization measurements suggested that the voltage required for the electrode process is lower in the chloride and nitrate systems than that in the sulfate system. The cathode current efficiency during the copper electrodeposition varied from 39 to 97% and increased with current density in the chloride and sulfate systems. In the nitrate system, the lowest cathode current efficiency of 30% was observed because of nitrate ion reduction. Based on these results, the power consumption required for the electrowinning stage of the copper recycling process was calculated. Among these three systems, the chloride system showed the lowest power consumption of 500 kWh t⁻¹ at the current density of 200 A m⁻², which is about 25% of the conventional copper electrowinning process from a copper sulfate-sulfuric acid solution.     

Gain‐Scheduled Control via Switching of LTI Controllers and State Reset

This paper proposes a synthesis method of gain‐scheduled control systems that switch linear time‐invariant controllers according to hysteresis of the scheduling parameter. Stability and L₂‐gain analysis and synthesis methods for switched systems are applied to the switched gain‐scheduled control synthesis using reset of the controller state, where also the reset law is computed via linear matrix inequalities (LMIs). In addition to optimization of an upper bound of L₂‐gain, we reduce jumps of control input via an auxiliary optimization. Numerical examples are presented to illustrate the switched gain‐scheduled controller.