Equilibrium and kinetic studies of azo dye (Basic Red 18) adsorption onto montmorillonite: Numerical simulation and laboratory experiments

Adsorption of BR 18 dye onto nano-clay adsorbent was investigated. Nano-clay was characterized by using FTIR, SEM, TEM, XRD and BET analysis. The percent removal increased by increasing nano-clay dose, while pH and stirring speed had no significant effect on the adsorption rate. It was observed that the uptake of dye onto nano-clay initially increased rapidly, and then decreased slowly until the equilibrium was reached. The adsorption capacity rose with an increase in temperature. Moreover, the adsorption kinetics was very fast and followed a pseudo second-order. The intra-particle diffusion was observed to be the rate-controlling step. In addition, equilibrium data fitted well with the Langmuir adsorption model. This paper also presents a numerical simulation incorporating the second-order kinetic expression using COMSOL Multiphysics software. The numerical modelling results and the experimental data were in excellent agreement.     

Electro-conductivity,bioactivity and UV protection of graphene oxide-treated cellulosic/polyamide fabric using inorganic and organic reducing agents

Here, graphene oxide (GO) was treated on the cellulosic/polyamide fabric reduced with various inorganic and organic compounds and compared the color changes, field emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction, electrical resistivity, antibacterial/antifungal and ultraviolet protection properties. The graphite oxide was first synthesized using graphite and sonicated to obtain GO. It was then dissolved in distilled water along with cetyltrimethylammonium bromide (CTAB) to prepare a stable solution for long-time adsorbing more and uniform GO on cellulosic/polyamide fabric through exhaustion method. The GO-treated fabric was reduced to reduced graphene oxide (rGO) with inorganic and organic reducing agents including sodium dithionite with and without sodium hydroxide and dopamine hydrochloride at various temperatures. More fabricated GO reduced to rGO at higher temperature using dopamine produced lower electrical resistance. The antimicrobial activities of various samples were tested against two Gram-negative bacteria, E. coli and P. aeruginosa, two Gram-positive bacteria, S. aureus and E. faecalis and one eukaryotic fungus C. albicans. Ultraviolet protection was examined through reflectance spectra showed no UV transmittance from most of the treated fabrics. Further, CTAB was effective to load more GO on the fabric improved electrical resistance and higher antibacterial properties using both reducing agents.     

Postpartum depression and vitamin D: A systematic review

Postpartum depression (PPD) is a prevalent mood disorder estimated to affect 20%–40% of women worldwide after childbirth. In recent studies, the effect of vitamin D on prevention of mood disorders and depression has been investigated, but it is still unclear how vitamin D may affect PPD. The evidence on the relevance between vitamin D deficiency and PPD is inconsistent, and assessment of the recent literature has not previously been carried out. Moreover, there are few clinical studies on PPD and vitamin D supplementation. Five studies have so far assessed the relationship between the levels of vitamin D and PPD. Findings from cohort studies suggest that vitamin-D deficiency is related to the incidence of PPD and vitamin D may play a significant role in the recovery of women with PPD, but it is uncertain whether these actions are the effect of vitamin D on the function of hypothalamic-pituitary-adrenal (HPA) axis, the levels of estradiol, serotonin, pro-inflammatory cytokines, and/or of other mechanisms involved in PPD.     

Novel aza peptide inhibitors and active-site probes of papain-family cysteine proteases

Recent characterization of multiple classes of functionalized azapeptides as effective covalent inhibitors of cysteine proteases prompted us to investigate O-acyl hydroxamates and their azapeptide analogues for use as activity-based probes (ABPs). We report here a new class of azaglycine-containing O-acylhydroxamates that form stable covalent adducts with target proteases. This allows them to be used as ABPs for papain family cysteine proteases. A second class of related analogues containing a novel O-acyl hydroxyurea warhead was found to function as covalent inhibitors of papain-like proteases. These inhibitors can be easily synthesized on solid support, which allows rapid optimization of compounds with improved selectivity and potency for a given target enzyme. We present here one such optimized inhibitor that showed selective inhibition of falcipain 1, a protease of the malaria-causing parasite, Plasmodium falciparum.     

Hard- and soft-modeling approaches for resolution of complex formation of Co2+ and Ni2+ with glycine

Principal component analysis (PCA) was used to obtain information about the number of components in the complex formation equilibria of Co(2+) and Ni(2+) with glycine (Gly). In order to obtain a clearer insight into these complex formation systems, multivariate curve resolution-alternating least squares (MCR-ALS) was used. Using MCR-ALS as a soft-modeling method, well-defined concentration and spectral profiles were obtained under unimodality, non-negativity, and closure constraints. Based on the obtained results, an equilibrium model was proposed and subsequently, a hard-modeling method was used to resolve the complex formation equilibria completely. Due to the presence of multiple equilibria, the resolution of such systems is very difficult. The Co-Gly system was best described by a model consisting of M(GlyH), M(Gly), M(Gly)(2), M(Gly)(2)H, and M(Gly)(3) (M = Co(2+)) with the overall stability constants determined to be 7.10 ± 0.011, 5.14 ± 0.006, 9.28 ± 0.009, 13.75 ± 0.016, and 11.10 ± 0.010, respectively. On the other hand, the system of Ni-Gly was best fitted by a model containing M(GlyH), M(Gly), M(Gly)(2), M(Gly)(3), and M(Gly)(2)(OH) (M = Ni(2+)) with overall stability constants of 10.95 ± 0.04, 6.41 ± 0.03, 11.31 ± 0.03, 15.39 ± 0.06, and 14.32 ± 0.02, respectively.     

Analytical studies on woven fabrics’ bagging performance affected by the material,yarn, and fabric parameters

The present work focuses on investigating the bagging behavior of woven fabrics produced from viscose and polyester/viscose yarns. In this paper, the bagging deformation – in terms of different bagging parameters (bagging resistance, bagging fatigue, bagging hysteresis, and residual bagging hysteresis) – has been interpreted by fabric’s physical and mechanical properties which were obtained from FAST system. The statistical analysis revealed that there is a significant correlation between the bagging parameters. Also, it was concluded that the samples’ physical and mechanical properties correlate significantly with bagging parameters. Additionally, the effects of four different variables such as material type, spinning system, weave pattern, and weft density on bagging parameters have been studied. Considering the high correlations between all the bagging parameters, it was decided to analyze only the parameter bagging fatigue in this paper. The results showed that all the fabric variables except the parameter weft density have significant effects on bagging fatigue performance.     

Relationship between pore coarsening and mass loss during supersolidus liquid phase sintering of alpha brass

ABSTRACT

The effect of sintering variables on the zinc loss during sintering of brass was investigated. Zinc loss, evident through mass change, starts during heating of the powder at approximately 700°C. By supersolidus liquid phase sintering of the cold-pressed brass powder, the maximum amount of zinc loss occurred at lower temperatures and prolonged sintering times. At higher temperatures, especially near the zinc boiling point, the rate of zinc loss from the surface is surprisingly moderate since closing of the pores causes zinc to be trapped in the samples. At lower temperatures, in contrast, when the pores in the surface are open and there is also a lower volume fraction of liquid phase, zinc can easily escape from the samples. Generally, it was thus concluded that during sintering, zinc loss depends more strongly on the pore connectivity and the specific surface than just on the nominal vapour pressure.     

Investigation into the curling behavior of single jersey weft-knitted fabrics and its prediction using neural network model

This research investigates the effect of fiber, yarn, and fabric parameters on curling phenomenon of single jersey weft-knitted fabrics which is interpreted to have curling surface in both course and wale direction. Taguchi’s experimental design is used to estimate the optimum process conditions and to examine the individual effects of all controllable factors on curling one by one. The controllable factors are blending ratio of polyester to cotton fiber, yarn twist and count, fabric structure, knit density, and relaxation time. Results show that fabric structure and knit density have the most dominant effect on the fabric curling. The optimum conditions of minimum curling values were also determined. Finally, the curling surface in course and wale direction as a two features of curling phenomenon was predicted using artificial neural network which selects scale conjugate gradient learning algorithm based on process parameters of single jersey weft-knitted fabrics. Our findings confirm the good capability of artificial neural network algorithm to predict these features.     

Structure and properties of nylon-6/amino acid modified nanoclay composite fibers

Biodegradable amino acid modified nanocaly was applied to produce nylon-6/nanoclay composite fibers using melt blending and melt spinning processes. Field emission scanning electron microscopy images showed that the surface of composite fibers was uniform and free from defects. Layer spacing of modified nanoclay was increased due to the penetration of polymer molecules into clay layers. Crystallinity, γ crystalline percentage and total molecular orientation of composite fibers were higher in comparison to neat nylon-6 fibers, as revealed by WAXD and birefringence measurements. Tensile strength of composite fibers was lower when compared to neat nylon-6 fibers. This may be attributed to some aggregation of nanoclay and its weakening effect. Melting and glass transition temperature of composite fiber was decreased due to the addition of modified nanoclay, indicating the formation of γ crystals and also breaking of some hydrogen bonds between the polymer molecules and the formation of new hydrogen bonds between the modified clay and the polymer molecules.