A novel consolidation method to measure powder flow properties using a small amount of material

Bulk flow property characterization often requires large powder samples (tens to hundreds of grams). However, many applications have limited sample availability, due to cost, material availability, safety concerns, etc. Therefore, reducing the amount of required material is of interest. A novel compressibility method is introduced using less than 50 mg, for the materials studied here. The effect of particle size and cohesion due to capillary forces are determined using a small‐scale compressibility cell mounted on a texture analyzer. It is found that the powder bed consolidation occurred in two regimes, described using the Walker and Heckel equations. The small‐scale compressibility method was compared to known behavior at larger scales and validated against the FT4 compressibility test. It was found that bulk behavior could be observed using the small‐scale compressibility method. Additional behavior caused by small‐scale events, which are averaged out in large‐scale measurements, are revealed in the small‐scale device introduced here. © 2016 American Institute of Chemical Engineers AIChE J, 62: 4193–4200, 2016     

Thermo‐hydraulic analysis of refinery heat exchangers undergoing fouling

A complete, systematic approach is presented for the analysis and characterization of fouling and cleaning in refinery heat exchangers. Bringing together advanced thermo‐hydraulic dynamic models, some new formulations, and a method for dynamic analysis of plant data, it allows: extracting significant information from the data; evaluating the fouling state of the units based on thermal measurements and pressure drops, if available; identifying the range of deposit conductivity leading to realistic pressure drops, if pressure measurements are unavailable; estimating key fouling and ageing parameters; estimating the effectiveness of cleaning and surface conditions after a clean; and predicting thermal and hydraulic performance with good accuracy for other periods/exchangers operating in similar conditions. An industrial case study demonstrates the performance prediction in seamless simulations that include partial and total cleanings for over 1000 days operation. The risks of using thermal effects alone and the significant advantages of including pressure drop measurements are highlighted. © 2016 American Institute of Chemical Engineers AIChE J, 63: 984–1001, 2017     

Runoff of pharmaceuticals and personal care products following application of biosolids to an agricultural field

Municipal biosolids are a source of nutrients for crop production. Beneficial Management Practices (BMPs) can be used to minimize the risk of contamination of adjacent water resources with chemical or microbial agents that are of public or environmental health concern. In this field study, we applied biosolids slurry at a commercial rate using either subsurface injection or broadcast application followed by incorporation. Precipitation was simulated at 1, 3, 7, 22, 36 and 266 days post-application on 2 m² microplots to evaluate surface runoff of 9 model pharmaceuticals and personal care products (PPCPs), atenolol, carbamazepine, cotinine, gemfibrozil, naproxen, ibuprofen, acetaminophen, sulfamethoxazole and triclosan. In runoff from the injected plots, concentrations of the model PPCPs were generally below the limits of quantitation. In contrast, in the broadcast application treatment, the concentrations of atenolol, carbamazepine, cotinine, gemfibrozil, naproxen, sulfamethoxazole and triclosan on the day following application ranged from 70-1477 ng L^− 1 in runoff and generally declined thereafter with first order kinetics. The total mass of PPCPs mobilized in surface runoff per m² of the field ranged from 0.63 µg for atenolol to 21.1 µg for ibuprofen. For ibuprofen and acetaminophen, concentrations in runoff first decreased and then increased, suggesting that these drugs were initially chemically or physically sequestered in the biosolids slurry, and subsequently released in the soil. Carbamazepine and triclosan were detected at low concentrations in a runoff event 266 days after broadcast application. Overall, this study showed that injection of biosolids slurry below the soil surface could effectively eliminate surface runoff of PPCPs.     

Development of a Demand Driven Hydro-climatic Model for Drought Planning

In recent years, droughts with increasing severity and frequency have been experienced around the world due to climate change effects. Water planning and management during droughts needs to deal with water demand variability, uncertainties in streamflow prediction, conflicts over water resources allocation, and the absence of necessary emergency schemes in drought situations. Reservoirs could play an important role in drought mitigation; therefore, development of an algorithm for operation of reservoirs in drought periods could help to mitigate the drought impacts by reducing the expected water shortages. For this purpose, the probable drought’s characteristics and their variations in response to factors such as climate change should be incorporated. This study aims at developing a contingency planning scheme for operation of reservoirs in drought periods using hedging rules with the objective of decreasing the maximum water deficit. The case study for evaluation of the performance of the proposed algorithm is the Sattarkhan reservoir in the Aharchay watershed, located in the northwestern part of Iran. The trend evaluations of the hydro-climatic variables show that the climate change has already affected streamflow in the region and has increased water scarcity and drought severity. To incorporate the climate change study in reservoir planning; streamflow should be simulated under climate change impacts. For this purpose, the climatic variables including temperature and precipitation in the future under climate change impacts are simulated using downscaled GCM (General Circulation Model) outputs to derive scenarios for possible future drought events. Then a hydrological model is developed to simulate the river streamflow, based on the downscaled data. The results show that the proposed methodology leads to less water deficit and decreases the drought damages in the study area.     

pH Responsive Abelmoschus esculentus Mucilage and Administration of Methotrexate: In-Vitro Antitumor and In-Vivo Toxicity Evaluation

The rapid progression in biomaterial nanotechnology apprehends the potential of non-toxic and potent polysaccharide delivery modules to overcome oral chemotherapeutic challenges. The present study is aimed to design, fabricate and characterize polysaccharide nanoparticles for methotrexate (MTX) delivery. The nanoparticles (NPs) were prepared by Abelmoschus esculentus mucilage (AEM) and chitosan (CS) by the modified coacervation method, followed by ultra-sonification. The NPs showed much better pharmaceutical properties with a spherical shape and smooth surface of 213.4–254.2 nm with PDI ranging between 0.279–0.485 size with entrapment efficiency varying from 42.08 ± 1.2 to 72.23 ± 2.0. The results revealed NPs to possess positive zeta potential and a low polydispersity index (PDI). The in-vitro drug release showed a sustained release of the drug up to 32 h with pH-dependence. Blank AEM -CS NPs showed no in-vivo toxicity for a time duration of 14 days, accompanied by high cytotoxic effects of optimized MTX loaded NPs against MCF-7 and MD-MBA231 cells by MTT assay. In conclusion, the findings advocated the therapeutic potential of AEM/CS NPs as an efficacious tool, offering a new perspective for pH-responsive routing of anticancer drugs with tumor cells as a target.     

Dysfunctional cGMP Signaling Leads to Age-Related Retinal Vascular Alterations and Astrocyte Remodeling in Mice

The nitric oxide–guanylyl cyclase-1–cyclic guanylate monophosphate (NO–GC-1–cGMP) pathway is integral to the control of vascular tone and morphology. Mice lacking the alpha catalytic domain of guanylate cyclase (GC1^−/−) develop retinal ganglion cell (RGC) degeneration with age, with only modest fluctuations in intraocular pressure (IOP). Increasing the bioavailability of cGMP in GC1^−/− mice prevents neurodegeneration independently of IOP, suggesting alternative mechanisms of retinal neurodegeneration. In continuation to these studies, we explored the hypothesis that dysfunctional cGMP signaling leads to changes in the neurovascular unit that may contribute to RGC degeneration. We assessed retinal vasculature and astrocyte morphology in young and aged GC1^−/− and wild type mice. GC1^−/− mice exhibit increased peripheral retinal vessel dilation and shorter retinal vessel branching with increasing age compared to Wt mice. Astrocyte cell morphology is aberrant, and glial fibrillary acidic protein (GFAP) density is increased in young and aged GC1^−/− mice, with areas of dense astrocyte matting around blood vessels. Our results suggest that proper cGMP signaling is essential to retinal vessel morphology with increasing age. Vascular changed are preceded by alterations in astrocyte morphology which may together contribute to retinal neurodegeneration and loss of visual acuity observed in GC1^−/− mice.     

A GC-EI-MS/MS Method for the Determination of 15 Polybrominated Diphenyl Ethers (PBDEs) in Fish and Shellfish Tissues

This paper describes the development and validation of an analytical method to determine 15 polybrominated diphenyl ethers (PBDEs) in fish and shellfish tissues with gas chromatography coupled to triple quadrupole mass spectrometry using electron impact source (GC-EI-MS/MS). A QuEChERS (Quick, Easy, Cheap, Effective, Rugged, and Safe)-like procedure was applied; the extract was cleaned up on an acidic Extrelut-NT3 column connected on top of a silica cartridge and further purified with gel permeation chromatography (GPC). The SIM acquisition proved to yield better results than traditional MRM approach for octa-, nona-, and deca-brominated congeners. The validation study was carried out in inter-laboratory conditions. The average recoveries were in the range 66–118%, with relative standard deviations generally lower than or equal to 22%. Quality assurance and quality control practices were thoroughly described and highlighted. These long and tedious practices are fundamental to obtain reliable quantitative data during food monitoring programs and, therefore, to support daily intake assessments. Finally, the procedure was applied to the analysis of marine fish samples collected in local markets. Mackerel and mullet were the most contaminated species.     

Probabilistic seismic damage assessment of reinforced concrete buildings considering directionality effects

Most of buildings and structures are usually projected according to two main axes. However, the geographical position of these buildings varies randomly. Such random distributions of the azimuthal positions of structures, in most of the cities, generally, are not accounted for when assessing their seismic risk; certainly, the direction of the seismic loads is another highly random variable. Moreover, an additional important source of uncertainty is related to the structural response, mainly due to the random character of the mechanical properties. There is a consensus that uncertainties must be considered for adequately assessing the seismic risk of structures, but these directionality effects have not been deeply explored so far. In this article, the influence of the high uncertainty involved in these input variables on the expected seismic damage is analysed. Thus, an actual earthquake, which affected the southern part of Spain, is studied. Notably, damages on a group of affected buildings, located close to the epicentre, are analysed and discussed in detail. The results show that the influence of the random azimuthal position of structures is an important source of uncertainty and that it should be taken into account when estimating the expected seismic risk in urban areas.