An Amplitude‐ and Rate‐Saturated Controller for Linear Plants

This paper proposes a new nonlinear controller applicable to single‐input linear systems under bounded disturbance. The controller provides control signals satisfying specified amplitude and rate‐of‐change limitations. This feature is realized by its sliding mode‐like structure comprising a set‐valued function. The controller also employs a state‐dependent parameter to broaden the region of attraction and to shrink the terminal attractor. In addition, this paper provides a discrete‐time implementation of the proposed controller based on a model‐based implicit discretization scheme. Numerical examples show the validity of the proposed controller.     

Limiting flux in microfiltration of colloidal suspensions by focusing on hydrodynamic forces in viscous sublayer

Cross‐flow microfiltration tests were performed on colloidal suspensions under turbulence conditions. By changing the particle diameter, flow rate, and channel height in the membrane housing to measure limiting fluxes, the influence of each parameter on the limiting flux was assessed from the viewpoint of hydrodynamic forces exerted on a particle in the viscous sublayer. In analyzing all the data taken, the particle Reynolds number calculated from the limiting flux is proportional to the 1.5 power of that calculated from the flow rate at the boundary between the viscous sublayer and the intermediate layer. This fact indicates that the limiting flux can be determined in situations where the drag force exerted by the flux is balanced by the lift force in the viscous sublayer. © 2017 American Institute of Chemical Engineers AIChE J, 64: 1760–1765, 2018     

Iron‐Catalyzed Reaction of γ‐Tocopherol with Methyl Linoleate Hydroperoxides in Solutions

γ‐Tocopherol is one of the main constituents in vegetable oils and acts as an antioxidant by trapping lipid‐peroxyl radicals. This study reports reaction products of γ‐tocopherol with lipid‐peroxyl radicals formed by iron‐catalyzed decomposition of methyl linoleate hydroperoxides (MeLOOH) in toluene and methanol solutions. The products in toluene solution were tocored, methyl (8a‐dioxy‐γ‐tocopherone)‐epoxyoctadecenoates (γT‐OO‐epoxyMeL), methyl (8a‐dioxy‐γ‐tocopherone)‐octadecadienoates (γT‐OO‐MeL), γ‐tocopherol biphenyl dimer (γTBD), γ‐tocopherol diphenylether dimer (γTED), and adducts of γ‐tocopherol dimers with the MeLOOH‐derived peroxyl radicals (γTED‐OO‐epoxyMeL, γTBD‐OO‐MeL, and γTED‐OO‐MeL). The iron‐catalyzed reaction in toluene proceeded slowly, whereas the reaction in methanol was relatively fast. The reaction products in methanol were γT‐OO‐epoxyMeL and γTED‐OO‐epoxyMeL together with tocored, γTBD, and γTED. The results indicate that the iron‐catalyzed decomposition of MeLOOH in toluene produces both epoxyperoxyl and peroxyl radicals and that the decomposition in methanol yields only the epoxyperoxyl radicals. These peroxyl radicals could react with the 8a‐carbon‐centered radical of γ‐tocopherol or its dimers.     

Natural denitrification in the Kakamigahara groundwater basin,Gifu prefecture,central Japan

Although nitrate is recognized as the most common groundwater contaminant due to growing anthropogenic sources, such as agriculture in particular, its adverse effects on human and animal health are debatable. The current issue, however, is to control and reduce nitrate contamination with regards to the long residence time of groundwater within aquifers. Denitrification has recently been recognized for its ability to reduce high nitrate concentrations in groundwater. The Kakamigahara groundwater basin, Gifu prefecture, Japan, witnessed rising levels of nitrate (>12 mg/l NO(3)-N) originating from agricultural sources. Chemical analyses for the determination of major constituents of groundwater and delta(15)N of residual nitrate were performed on representative groundwater samples in order to fulfill two main objectives. One is to investigate the current situation of nitrate groundwater pollution. The second objective is to determine whether the denitrification is a potential natural mechanism, which eliminates nitrate pollution in the Kakamigahara aquifer. Agricultural nitrate contamination of groundwater was obvious from characteristically high concentrations of Ca(2+), Mg(2+), NO(3)(-) and SO(4)(2-). High nitrate concentrations were found on the eastern side of the basin in association with vegetable cultivation fields, and decreased gradually towards the west of the basin along the direction of groundwater flow. The decrease of nitrate concentration was conveniently coupled with increase of HCO(3)(-) (the heterotrophic denitrification product), pH and delta(15)N of residual nitrate (due to isotopic fractionation) from east to west. Therefore, denitrification in situ is continuously removing nitrate from the Kakamigahara groundwater system.     

Precipitation recovery of boron from wastewater by hydrothermal mineralization

It is well known that boric acid exhibits various toxic effects on plant, animal and human beings even at very low concentrations. Thus, the development of boron-removal technique from wastewater has been intensively investigated. In this study, a new hydrothermal treatment technique was developed to recover boron as recyclable precipitate Ca(2)B(2)O(5).H(2)O from aqueous solutions. As a result, it was found that the hydrothermal treatment using calcium hydroxide as a mineralizer converted boron in the aqueous media effectively into calcium borate, Ca(2)B(2)O(5).H(2)O. In the optimal hydrothermal condition, more than 99% of boron was collected from the synthetic wastewater of 500 ppm. Thus, the present hydrothermal treatment in the presence of calcium hydroxide is recommended as one of the effective techniques to recover boron from aqueous media.     

FIR system identification based on a nonparametric Bayesian model using the Indian buffet process

In this paper, we propose a nonparametric Bayesian model combined with the Indian buffet process (IBP) for a finite impulse response (FIR) system. We develop an FIR system identification method that can simultaneously estimate the number of FIR taps and coefficients. In the proposed model, each FIR tap consists of a coefficient and a gain, and the gain is a binary value. An infinite-dimensional binary vector is composed of binary values, and we assume that this binary vector is generated by the IBP. To identify the FIR system, we specify the likelihood function and prior distributions of the parameters and derive their posterior distributions. We can simultaneously estimate the number of FIR taps and coefficients by sampling from posterior distributions using the Gibbs sampler. Our simulations demonstrate that although the number of FIR taps is unknown, the identification performance of the proposed method in a high signal-to-noise ratio environment is similar to or better than that of the conventional least square solution.     

Littrow-type external-cavity blue laser for holographic data storage

An external-cavity laser with a wavelength of 405 nm and an output of 80 mW has been developed for holographic data storage. The laser has three states: the first is a perfect single mode, whose coherent length is 14 m; the second is a three-mode state with a coherent length of 3 mm; and the third is a six-mode state with a coherent length of 0.3 mm. The first and second states are available for angular-multiplexing recording; all states are available for coaxial multiplexing recording. Due to its short wavelength, the recording density is higher than that of a 532 nm laser.     

Tunable blue laser compensates for thermal expansion of the medium in holographic data storage

A tunable laser optical source equipped with wavelength and mode-hop monitors was developed to compensate for thermal expansion of the medium in holographic data storage. The laser's tunable range is 402-409 nm, and supplying 90 mA of laser diode current provides an output power greater than 40 mW. The aberration of output light is less than 0.05 lambdarms. The temperature range within which the laser can compensate for thermal expansion of the medium is estimated based on the tunable range, which is +/-13.5 degrees C for glass substrates and +/-17.5 degrees C for amorphous polyolefin substrates.