High pressure cell for neutron reflectivity measurements up to 2500 bar

The design of a high pressure (HP) cell for neutron reflectivity experiments is described. The cell can be used to study solid-liquid interfaces under pressures up to 2500 bar (250 MPa). The sample interface is based on a thick silicon block with an area of about 14 cm(2). This area is in contact with the sample solution which has a volume of only 6 cm(3). The sample solution is separated from the pressure transmitting medium, water, by a thin flexible polymer membrane. In addition, the HP cell can be temperature-controlled by a water bath in the range 5-75°C. By using an aluminum alloy as window material, the assembled HP cell provides a neutron transmission as high as 41%. The maximum angle of incidence that can be used in reflectivity experiments is 7.5°. The large accessible pressure range and the low required volume of the sample solution make this HP cell highly suitable for studying pressure-induced structural changes of interfacial proteins, supported lipid membranes, and, in general, biomolecular systems that are available in small quantities, only. To illustrate the performance of the HP cell, we present neutron reflectivity data of a protein adsorbate under high pressure and a lipid film which undergoes several phase transitions upon pressurization.     

A bio-inspired predictive sensory-motor coordination scheme for robot reaching and preshaping

This paper presents a sensory-motor coordination scheme for a robot hand-arm-head system that provides the robot with the capability to reach an object while pre-shaping the fingers to the required grasp configuration and while predicting the tactile image that will be perceived after grasping. A model for sensory-motor coordination derived from studies in humans inspired the development of this scheme. A peculiar feature of this model is the prediction of the tactile image. The implementation of the proposed scheme is based on a neuro-fuzzy module that, after a learning phase, starting from visual data, calculates the position and orientation of the hand for reaching, selects the best-suited hand configuration, and predicts the tactile feedback. The implementation of the scheme on a humanoid robot allowed experimental validation of its effectiveness in robotics and provided perspectives on applications of sensory predictions in robot motor control.     

TrajStat: GIS-based software that uses various trajectory statistical analysis methods to identify potential sources from long-term air pollution measurement data

Statistical analysis of air mass back trajectories combined with long-term ambient air pollution measurements are useful tools for source identification. Using these methods, the geographic information system (GIS) based software, TrajStat, was developed to view, query, and cluster the trajectories and compute the potential source contribution function (PSCF) and concentration weighted trajectory (CWT) analyses when measurement data are included.     

Magnebike: A magnetic wheeled robot with high mobility for inspecting complex‐shaped structures

This paper describes the Magnebike robot, a compact robot with two magnetic wheels in a motorbike arrangement, which is intended for inspecting the inner casing of ferromagnetic pipes with complex‐shaped structures. The locomotion concept is based on an adapted magnetic wheel unit integrating two lateral lever arms. These arms allow for slight lifting off the wheel in order to locally decrease the magnetic attraction force when passing concave edges, as well as laterally stabilizing the wheel unit. The robot has the main advantage of being compact (180 × 130 × 220 mm) and mechanically simple: it features only five active degrees of freedom (two driven wheels each equipped with an active lifter stabilizer and one steering unit). The paper presents in detail design and implementation issues that are specific to magnetic wheeled robots. Low‐level control functionalities are addressed because they are necessary to control the active system. The paper also focuses on characterizing and analyzing the implemented robot. The high mobility is shown through experimental results: the robot not only can climb vertical walls and follow circumferential paths inside pipe structures but it is also able to pass complex combinations of 90‐deg convex and concave ferromagnetic obstacles with almost any inclination regarding gravity. It requires only limited space to maneuver because turning on the spot around the rear wheel is possible. This high mobility enables the robot to access any location in the specified environment. Finally the paper analyzes the maximum payload for different types of environment complexities because this is a key feature for climbing robots and provides a security factor about the risk of falling and slipping. © 2009 Wiley Periodicals, Inc.     

Capillary-driven pumping for passive degassing and fuel supply in direct methanol fuel cells

In this paper we present a new concept of creating and using capillary pressure gradients for passive degassing and passive methanol supply in direct methanol fuel cells (DMFCs). An anode flow field consisting of parallel tapered channels structures is applied to achieve the passive supply mechanism. The flow is propelled by the surface forces of deformed CO₂ bubbles, generated as a reaction product during DMFC operation. This work focuses on studying the influence of channel geometry and surface properties on the capillary-induced liquid flow rates at various bubbly gas flow rates. Besides the aspect ratios and opening angles of the tapered channels, the static contact angle as well as the effect of contact angle hysteresis has been identified to significantly influence the liquid flow rates induced by capillary forces at the bubble menisci. Applying the novel concept, we show that the liquid flow rates are up to thirteen times higher than the methanol oxidation reaction on the anode requires. Experimental results are presented that demonstrate the continuous passive operation of a DMFC for more than 15 h.     

Protecting and preserving clear barrier layers for flexible packaging materials In‐line thermal evaporation of organic topcoat layer

The end market for transparent flexible barrier films is larger than for metallized films. Presently, the market is still dominated by polymeric barrier layers but the used chemicals may be harmful for the environment. An alternative would be transparent thin layers deposited by vacuum deposition techniques using reactive processes. Ceramic materials like silicon oxide or aluminum oxide are used having a film thickness of just ～10 nm, a coating uniformity of +/?5% across and along the film at a barrier performance below 2.0 sccm/m²d for oxygen transmission rate (OTR) and below 1.0 g/m²d for water vapor transmission rate (WVTR) on PET substrates. In this paper, details will be provided about the deposition processes for these barrier layers using thermal evaporation, plasma‐assisted thermal evaporation as well as deposition by electron beam evaporation. An important factor for these high barrier transparent coatings is also to withstand the downstream processes in the whole packaging stream like slitting, lamination, printing etc. One solution is to protect the barrier layers by a Topcoat. For example, off‐line deposition of lacquers is used in field but the market penetration is low due to high process and material costs. An in‐situ Topcoat deposition is a smart solution to overcome this issue saving time and costs. Such an approach will be also described in the presentation and the impact on the performance of the final package will be discussed.     

Controlled counter-flow motion of magnetic bead chains rolling along microchannels

We demonstrate controlled transport of superparamagnetic beads in the opposite direction of a laminar flow. A permanent magnet assembles 200 nm magnetic particles into about 200 μm long bead chains that are aligned in parallel to the magnetic field lines. Due to a magnetic field gradient, the bead chains are attracted towards the wall of a microfluidic channel. A rotation of the permanent magnet results in a rotation of the bead chains in the opposite direction to the magnet. Due to friction on the surface, the bead chains roll along the channel wall, even in counter-flow direction, up to at a maximum counter-flow velocity of 8 mm s⁻¹. Based on this approach, magnetic beads can be accurately manoeuvred within microfluidic channels. This counter-flow motion can be efficiently be used in Lab-on-a-Chip systems, e.g. for implementing washing steps in DNA purification.     

Overlay-Netze als Innovationsmotor im Internet Spontane virtuelle Netze: auf dem Weg zum Internet der Zukunft

Das Internet ist heute eine globale Infrastruktur, deren st?ndige Verfügbarkeit mehr oder weniger als gegeben angenommen wird. Die Einführung neuer Technologien (z. B. Multicast, IPv6) in diese Infrastruktur erweist sich aus unterschiedlichen Gründen als schwierig. Vielmehr haben sich Overlay-Netze in diesem Kontext als Innovationsmotor etabliert. Diese werden von Endger?ten am Netzrand aufgespannt, ben?tigen somit keine neuen Komponenten in der Netzinfrastruktur und lassen sich selbstorganisierend sowie skalierbar einsetzen. Interessant sind diese Eigenschaften auch für den Overlay-basierten Aufbau und Betrieb von Kommunikationsnetzen an sich, mit dem Ziel, unbeeinflusst von Mobilit?t, Multi-Homing und Heterogenit?t der Protokolle und Zugangsnetze nahtlose Konnektivit?t zwischen Endger?ten herzustellen. Dieser Artikel zeigt anhand von Beispielen auf, wie Overlays die Entwicklung neuer Dienste im Internet vorantreiben k?nnen. Als Beispiel für eine Overlay-basierte Netzarchitektur, welche die Realisierung neuer Dienste und Anwendungen erm?glicht, wird die Architektur zur Realisierung von Spontanen Virtuellen Netzen (SpoVNet) und deren Netzabstraktionsschicht ariba detailliert vorgestellt.     

Modelling water dynamics with DNDC and DAISY in a soil of the North China Plain: A comparative study

The performance of the DNDC and Daisy model to simulate the water dynamics in a floodplain soil of the North China Plain was tested and compared. While the DNDC model uses a simple cascade approach, the Daisy model applies the physically based Richard's equation for simulating water movement in soil. For model testing a three years record of the soil water content from the Dong Bei Wang experimental station near Beijing was used. There, the effect of nitrogen fertilization, irrigation and straw removal on soil water and nitrogen dynamics was investigated in a three factorial field experiment applying a split-split-plot design with 4 replications. The dataset of one treatment was used for model testing and calibration. Two other independent datasets from further treatments were employed for validating the models. For both models, the simulation results were not satisfying using default parameters. After parameter optimisation and the use of site-specific van Genuchten parameters, however, the Daisy model performed well. But, for the DNDC model, parameter optimisation failed to improve the simulation result. Owing to the fact that many biological processes such as plant growth, nitrification or denitrification depend strongly on the soil water content, our findings bring us to the conclusion that the site-specific suitability of the DNDC model for simulating the soil water dynamics should be tested before further simulation of other processes.