Zur Kenntnis des thermoplastischen Verhaltens von Holz

Ohne Zusammenfassung Mitteilung aus der Bundesanstalt für Forst- und Holzwirtschaft, Reinbek bei Hamburg.     

Multi-Stage Phase-Segregation of Mixed Halide Perovskites under Illumination: A Quantitative Comparison of Experimental Observations and Thermodynamic Models

Photo- and charge-carrier-induced ion migration is a major challenge when utilizing metal halide perovskite semiconductors for optoelectronic applications. For mixed iodide/bromide perovskites, the compositional instability due to light- or electrical bias induced phase-segregation restricts the exploitation of the entire bandgap range. Previous experimental and theoretical work suggests that excited states or charge carriers trigger the process, but the exact mechanism is still under debate. To identify the mechanism and cause of light-induced phase-segregation phenomena, the full compositional range of methylammonium lead bromide/iodide samples are investigated, MAPb(Br_xI_1-x)₃ with x = 0…1, by simultaneous in situ X-ray diffraction (XRD) and photoluminescence (PL) spectroscopy during illumination. The quantitative comparison of composition-dependent in situ XRD and PL shows that at excitation densities of 1 sun, only the initial stage of photo-segregation is rationalized with the previously established thermodynamic models. However, a progression of the phase segregation is observed that is rationalized by considering long-lived accumulative photo-induced material alterations. It is suggested that (additional) photo-induced defects, possibly halide vacancies and interstitials, need to be considered to fully rationalize light-induced phase segregation and anticipate the findings to provide crucial insight for the development of more sophisticated models.     

Ram‐air kite airfoil and reinforcements optimization for airborne wind energy applications

We present a multidisciplinary design optimization method for the profile and structural reinforcement layout of a ram‐air kite rib. The aim is to minimize the structural elastic energy and to maximize the traction power of a ram‐air kite used for airborne wind energy generation. Because of the large deformations occurring during flight, a fluid‐structure interaction (FSI) routine is included in the optimization, which determines the actual deformed rib geometry and its corresponding aerodynamic characteristics. A qualitative comparison between FSI inclusion and exclusion in the optimization is given. Discrepancies in airfoil profile and structural layout are observed.     

Regression Techniques for Oceanographic Parameter Retrieval Using Space-Borne Microwave Radiometry

Variations of conventional multiple regression techniques are applied to the problem of remote sensing of oceanographic parameters from space. The techniques are specifically adapted to the scanning multichannel microwave radiometer (SMMR) launched on the Seasat and Nimbus 7 satellites to determine ocean surface temperature, wind speed, and atmospheric water content. The retrievals are studied primarily from a theoretical viewpoint, to illustrate the retrieval error structure, the relative importances of different radiometer channels, and the tradeoffs between spatial resolution and retrieval accuracy. Comparisons between regressions using simulated and actual SMMR data are discussed; they show similar behavior.     

Remediation of groundwater contaminated with MTBE and benzene: the potential of vertical-flow soil filter systems

Field investigations on the treatment of MTBE and benzene from contaminated groundwater in pilot or full-scale constructed wetlands are lacking hugely. The aim of this study was to develop a biological treatment technology that can be operated in an economic, reliable and robust mode over a long period of time. Two pilot-scale vertical-flow soil filter eco-technologies, a roughing filter (RF) and a polishing filter (PF) with plants (willows), were operated independently in a single-stage configuration and coupled together in a multi-stage (RF + PF) configuration to investigate the MTBE and benzene removal performances. Both filters were loaded with groundwater from a refinery site contaminated with MTBE and benzene as the main contaminants, with a mean concentration of 2970 ± 816 and 13,966 ± 1998 μg L⁻¹, respectively. Four different hydraulic loading rates (HLRs) with a stepwise increment of 60, 120, 240 and 480 L m⁻² d⁻¹ were applied over a period of 388 days in the single-stage operation. At the highest HLR of 480 L m⁻² d⁻¹, the mean concentrations of MTBE and benzene were found to be 550 ± 133 and 65 ± 123 μg L⁻¹ in the effluent of the RF. In the effluent of the PF system, respective mean MTBE and benzene concentrations of 49 ± 77 and 0.5 ± 0.2 μg L⁻¹ were obtained, which were well below the relevant MTBE and benzene limit values of 200 and 1 μg L⁻¹ for drinking water quality. But a dynamic fluctuation in the effluent MTBE concentration showed a lack of stability in regards to the increase in the measured values by nearly 10%, which were higher than the limit value. Therefore, both (RF + PF) filters were combined in a multi-stage configuration and the combined system proved to be more stable and effective with a highly efficient reduction of the MTBE and benzene concentrations in the effluent. Nearly 70% of MTBE and 98% of benzene were eliminated from the influent groundwater by the first vertical filter (RF) and the remaining amount was almost completely diminished (∼100% reduction) after passing through the second filter (PF), with a mean MTBE and benzene concentration of 5 ± 10 and 0.6 ± 0.2 μg L⁻¹ in the final effluent. The emission rate of volatile organic compounds mass into the air from the systems was less than 1% of the inflow mass loading rate. The results obtained in this study not only demonstrate the feasibility of vertical-flow soil filter systems for treating groundwater contaminated with MTBE and benzene, but can also be considered a major step forward towards their application under full-scale conditions for commercial purposes in the oil and gas industries.     

Improving the clinical potential of ultra-high field fMRI using a model-free analysis method based on response consistency

Objective

To develop an analysis method that is sensitive to non-model-conform responses often encountered in ultra-high field presurgical planning fMRI. Using the consistency of time courses over a number of experiment repetitions, it should exclude low quality runs and generate activation maps that reflect the reliability of responses.

Materials and methods

7 T fMRI data were acquired from six healthy volunteers: three performing purely motor tasks and three a visuomotor task. These were analysed with the proposed approach (UNBIASED) and the GLM.

Results

UNBIASED results were generally less affected by false positive results than the GLM. Runs that were identified as being of low quality were confirmed to contain little or no activation. In two cases, regions were identified as activated in UNBIASED but not GLM results. Signal changes in these areas were time-locked to the task, but were delayed or transient.

Conclusion

UNBIASED is shown to be a reliable means of identifying consistent task-related signal changes regardless of response timing. In presurgical planning, UNBIASED could be used to rapidly generate reliable maps of the consistency with which eloquent brain regions are activated without recourse to task timing and despite modified hemodynamics.

     

Study of the catalytic combustion of lean hydrogen-air mixtures in a monolith reactor

This paper presents an experimental study of catalytic hydrogen combustion that used commercial catalysts containing Pt in a honeycomb monolith reactor in a plug flow configuration. The emphasis is on determining global kinetics in the case of low hydrogen content. Measurements of the temperature and composition of the reaction product at the outlet in the steady state condition at the different initial compositions of hydrogen and total volumetric feed rates were performed. The conversion of hydrogen was determined in parallel to the composition of the reaction product at the outlet using GC as well as by means of the thermodynamic approach using material and energy balances. The influence of the flow rate and initial molar fraction of hydrogen on hydrogen conversion is shown. A kinetic expression of the Arrhenius type is proposed with the reaction first order in hydrogen and zero order in oxygen for the overall process of the oxidation of hydrogen in lean hydrogen-air mixtures. The determined activation energy was in good agreement with the desorption activation energy for O₂ from graphene-covered Pt(111) surfaces using temperature-programmed desorption. This result shows transport-limitations for heterogeneous hydrogen conversion in catalytic hydrogen combustion.     

Flow modelling of quasi-Newtonian fluids in two-scale fibrous fabrics

Permeability is the fundamental macroscopic material property needed to quantify the flow in a fibrous medium viewed as a porous medium. Composite processing models require the permeability as input data to predict flow patterns and pressure fields. In a previous work, the expressions of macroscopic permeability were derived in a double-scale porosity medium for both Newtonian and generalized Newtonian (shear-thinning) resins. In the linear case, only a microscopic calculation on a representative volume is required, implying as many microscopic calculations as there are representative microscopic volumes in the whole fibrous structure. In the non-linear case, and even when the porous microstructure can be described by a unique representative volume, a large number of microscopic calculations must be carried out as the microscale resin viscosity depends on the macroscopic velocity, which in turn depends on the permeability that results from a microscopic calculation. An original and efficient offline-online procedure was proposed for the solution of non-linear flow problems related to generalized Newtonian fluids in porous media. In this paper, this procedure is generalized to quasi-Newtonian fluids in order to evaluate the effect of extensional viscosity on the resulting upscaled permeability. This work constitutes a natural step forward in the definition of equivalent saturated permeabilities for linear and non-linear fluids.