Experimental observation of temperature gradients occurring in a single zeolite pellet

An experimental study has been made of temperature profiles incident within a zeolite adsorbent particle in the course of adsorption of n-heptan. Using thermocouple wires 0.1 mm in diameter it has been possible to measure simultaneously the temperatures of the surface and in the centre. It was observed that temperature differences between center of the pellet and ambient stagnant gas may be more than 20°C. The results of this work indicate that the overheating of an adsorbent particle is a very rapid process which is followed by a slow cooling of the hot particle. Experimental data are compared with predictions calculated from the theoretical model.     

Synthesis, structure and magnetic properties of β-MnO 2 nanorods

We present synthesis, structure and magnetic properties of structurally well-ordered single-crystalline β-MnO₂ nanorods of 50–100 nm diameter and several μm length. Thorough structural characterization shows that the basic β-MnO₂ material is covered by a thin surface layer (∼2.5 nm) of α-Mn₂O₃ phase with a reduced Mn valence that adds its own magnetic signal to the total magnetization of the β-MnO₂ nanorods. The relatively complicated temperature-dependent magnetism of the nanorods can be explained in terms of a superposition of bulk magnetic properties of spatially segregated β-MnO₂ and α-Mn₂O₃ constituent phases and the soft ferromagnetism of the thin interface layer between these two phases.     

Solvent induced crystallization of syndiotactic poly(methyl methacrylate) relation to the formation of polymer aggregates in solution

Polymer Bulletin - Solutions of syndiotactic (s) poly (methyl methacrylate) (PMMA) and samples of solid s-PMMA prepared from these solutions were studied by NMR and infrared (IR) spectroscopy and...     

Negative electrodes for nickel-cadmium accumulators: their properties as determined by impregnation procedure

Sintered negative electrodes for nickel-cadmium secondary cells were studied. Model electrodes prepared by means of three different impregnation methods were evaluated. It was demonstrated that the impregnation procedure may affect properties of active mass and the service life of electrodes in a significant way.     

Study of rotational mobility of stable nitroxide radicals in solid polymers

The rotational mobility of stable nitroxide radicals in PS, PMMA, PVC, PP and PE has been studied over a wide temperature range by the e.s.r. method. At temperatures T lower than T_g, spin probes act as kinetically independent particles, the rotational frequency of which is deter mined mainly by the micropore dimensions of the polymer and depends indirectly on the mobility of segments or side groups.     

Ensemble-based noise detection: noise ranking and visual performance evaluation

Noise filtering is most frequently used in data preprocessing to improve the accuracy of induced classifiers. The focus of this work is different: we aim at detecting noisy instances for improved data understanding, data cleaning and outlier identification. The paper is composed of three parts. The first part presents an ensemble-based noise ranking methodology for explicit noise and outlier identification, named Noise- Rank, which was successfully applied to a real-life medical problem as proven in domain expert evaluation. The second part is concerned with quantitative performance evaluation of noise detection algorithms on data with randomly injected noise. A methodology for visual performance evaluation of noise detection algorithms in the precision-recall space, named Viper, is presented and compared to standard evaluation practice. The third part presents the implementation of the NoiseRank and Viper methodologies in a web-based platform for composition and execution of data mining workflows. This implementation allows public accessibility of the developed approaches, repeatability and sharing of the presented experiments as well as the inclusion of web services enabling to incorporate new noise detection algorithms into the proposed noise detection and performance evaluation workflows.     

Characterisation of cut and chip behaviour for NR,SBR and BR compounds with an instrumented laboratory device

ABSTRACT

Understanding the cut and chip (CC) effect in rubber is important for successful product development for tires used in off-road or poor road conditions and for other demanding applications of rubber. This research describes a laboratory testing method for characterising the CC fracture behaviour of rubber using a device that controls and records multiple applied loads and displacements during cyclic impact to the surface of a solid rubber specimen to mimic and quantify the CC damage experienced by tire tread compounds. To study the capabilities of the instrument, three model compounds were studied that are based on carbon black reinforced compounds of common elastomers used in tire treads: natural rubber (NR), styrene-butadiene rubber (SBR), and butadiene rubber (BR). These polymers have well-established CC tendencies in field performance of tire treads, with NR exhibiting the best CC resistance followed by SBR and finally BR. The same trend was found with the rubber impact testing approach that allowed the CC behaviour to be quantified using a new physical parameter which is the CC propensity (P). The relative ranking for CC resistance for the three compounds followed the fatigue crack growth resistances of the materials but was exactly opposite to the ranking of DIN abrasion resistance. This provides evidence that CC damage from impact by mm-scale asperities and abrasion of rubber against μm-scale asperities exhibit distinct characteristics in rubber.     

Corrosion protection of aluminium in acidic chloride solutions with nontoxic inhibitors

Corrosion kinetics of 99.6% aluminium covered by a thin spontaneously formed oxide film in hydrochloric acid solution with and without the presence of substituted N-aryl pyrroles was studied using electrochemical impedance spectroscopy and quasi steady-state polarization. Measurements were performed on a rotating disc electrode in an argon-deaerated solution in the temperature range 20 to 50°C. The addition of inhibitor considerably increases overvoltage of the cathodic process (HER) and shifts Ecorr to negative potential values. The activation energy of the hydrogen evolution reaction was Ea=50±5kJmol–1 and was not affected by the presence of inhibitor. The inhibitory action occurs by -bonding between the adsorbed inhibitor molecules and the electrode surface. The electrode coverage follows the Langmuir adsorption isotherm with an adsorption equilibrium constant K=1.1–2.64×105dm3mol–1. The adsorption of organic compound prevents the adsorption of chloride ions and slow down the rate of corrosion.     

Effect of temperature on the separation of some Δ9-cis-trans isomers of methyl esters of fatty acids by open tubular gas chromatography

The influence of temperature on the gas chromatographic separation ofcis-trans isomers of the methyl esters of some monounsaturated fatty acids was studied on capillary columns coated with Apiezon L, BDS and DEGS. As far as methyl oleate and methyl elaidate are concerned, the separation is better at lower temperatures on Apiezon L (180–210 C) and at higher temperatures on polyester phases (BDS, DEGS; 150–180 C). The influence of temperature on the separation ofcis-trans isomers on the three stationary phases under study is explained by the higher values of δECL/δt forcis isomers. The variation of the equivalent carbon chain length with temperature can be used for the identification ofcis-trans isomers in natural mixtures.