In vivo visualization of neurotransmitter function in the human brain by PET

Moving along a microtubule, kinesin follows a course parallel to the protofilaments; but it is not known whether kinesin binds exclusively on a single protofilament. The presence of zinc during tubulin polymerization induces sheets where neighboring protofilaments are antiparallel. If kinesin could support the motility of these zinc-sheets, then the binding site for a kinesin molecule would be limited to a single protofilament. Kamimura and Mandelkow [1992: J. Cell Biol. 118:865-75] reported that kinesin moves along zinc-sheets. We found that zinc-sheets grown under their conditions often had a microtubule-like structure along one edge. We confirmed the possibility that the motility observed by Kamimura and Mandelkow [1992: J. Cell Biol. 118:865-75] is attributed to the microtubule-like structure rather than the zinc-sheet. To resolve the question of whether kinesin can recognize an antiparallel protofilament lattice, we investigated the kinesin-mediated motility of zinc-macrotubes. At higher free zinc concentrations, zinc-sheets roll up as macrotubes, free of edges. In the presence of 10 microM taxol and 100 nM free Zn2+ at pH 6.8, the samples were shown by electron microscopy to contain only macrotubes. Under these buffer conditions, kinesin could bind strongly to axonemal doublets in the presence of AMP-PNP, and generate motility in the presence of ATP, but kinesin did not bind to nor move the macrotubes. This shows that kinesin cannot bind efficiently to nor move on the anti-parallel lattice; it is possible (though not necessary) that the groove between two parallel protofilaments is required for kinesin's motility.     

Determination of the point position for brachytherapy from the shift-projection method using the least squares method and geometrical solutions

We have derived formulas by the least squares method and six sets of geometrical solutions for calculating the position for brachytherapy from shift-projection images on one or two films. There are four types of expression for each coordinate in both methods, the shift-film technique with double exposures on a film and the stereo-shift technique with two films. Some geometrical solutions for the shift-film technique are equal to well-known conventional formulas. In the case of the stereo-shift technique, each conventional formula for the two coordinates is equal to the mean of the two geometrical solutions of each coordinate, and the one for the other coordinate is equal to one of the geometrical solutions. Formulas for the shift-film technique can be easily reduced to those for the stereo-shift technique. The error of the position calculated by the least squares method was the smallest among all the formulas for the shift-film technique in simulation.     

Purification of docosahexaenoic acid by selective esterification of fatty acids from tuna oil with Rhizopus delemar lipase

To purify docosahexaenoic acid (DHA), we attempted the selective esterification of fatty acids originating from tuna oil with lipases. Tuna oil was hydrolyzed in NaOH-ethanol solution, and the resulting fatty acid mixture [DHA, 23.2%; named tuna-free fatty acid (FFA)] was used as a starting material. Rhizopus delemar which acted lightly on DHA, was a suitable catalyst for the selective esterification of tuna-FFA, and lauryl alcohol was the best substrate. The reaction proceeded most effectively when a mixture of 2.4 g lauryl alcohol/tuna-FFA (2:1, mol/mol), 0.6 g water, and 600 U Rhizopus lipase was incubated at 30°C for 20 h with stirring at 500 rpm. Under these conditions 72% of tuna-FFA was esterified, and 84% of DHA was recovered in the unesterified fatty acid fraction. The DHA content in the fatty acid fraction rose from 23 to 73% with this reaction. To further elevate the DHA content, the unesterified fatty acids were extracted, and then esterified again under the same conditions. By this repeated esterification, DHA was purified to 89% with a recovery of 71% of its initial content.     

Constituents of essential oil from the dried fruits and stems of Akebia quinata (THUNB.) DECNE

The compositions of the essential oil from AKEBIAE FRUCTUS and AKEBIAE CAULIS, the dried fruits and stems of Akebia quinata (THUNB.) DECNE. (Lardizabalaceae), have been investigated by GC and GC/MS. As a result, the fruits oil was revealed the presence of 86 components, representing 98.4% of the total oil. The major compounds of the fruits oil were limonene, eugenol, octanal and p-cymene. The monoterpenoids and saturated short-chain aldehyde (C6 approximately C10) were main volatile fractions of the oil. Ninety components accounting for 90.5% of constituents of stems oil were identified, and the main compounds of the oil were hexanoic acid, palmitic acid, (2E, 4E)-decadienal and hexanol. The oil had high content of saturated fatty acids (C6 approximately C16), and unsaturated short-chain aldehyde (C6 approximately C10).     

Interface between quantum-mechanical-based approaches,experiments, and CALPHAD methodology

The increased application of quantum-mechanical-based methodologies to the study of alloy stability has required a re-assessment of the field. The focus is mainly on inorganic materials in the solid state. In a first part, after a brief overview of the so-called ab initio methods with their approximations, constraints, and limitations, recommendations are made for a good usage of first-principles codes with a set of qualifiers. Examples are given to illustrate the power and the limitations of ab initio codes. However, despite the “success” of these methodologies, thermodynamics of complex multi-component alloys, as used in engineering applications, requires a more versatile approach presently afforded within CALPHAD. Hence, in a second part, the links that presently exist between ab initio methodologies, experiments, and the CALPHAD approach are examined with illustrations. Finally, the issues of dynamical instability and of the role of lattice vibrations that still constitute the subject of ample discussions within the CALPHAD community are revisited in the light of our current knowledge with a set of recommendations.     

Viewpoint image generation for head tracking 3D display using multi‐camera and approximate depth information

A simple and high image quality method for viewpoint image synthesis from multi‐camera images for a stereoscopic 3D display using head tracking is proposed. In this method, slices of images for depth layers are made using approximate depth information, the slices are linearly blended corresponding to the distance between the viewpoint and cameras at each layer, and the layers are overlaid from the perspective of viewpoint. Because the linear blending automatically compensates for depth error because of the visual effects of depth‐fused 3D (DFD), the resulting image is natural to observer's perception. Smooth motion parallax of wide depth range objects induced by viewpoint movement for left‐and‐right and front‐and‐back directions is achieved using multi‐camera images and approximate depth information. Because the calculation algorithm is very simple, it is suitable for real time 3D display applications.     

Evidence for the existence of organosulfates from beta-pinene ozonolysis in ambient secondary organic aerosol

The formation of organosulfates from the gas-phase ozonolysis of beta-pinene in the presence of neutral or acidic sulfate particles was investigated in a series of indoor aerosol chamber experiments. The organosulfates were analyzed using high-performance liquid chromatography (LC) coupled to electrospray ionization-time-of-flight mass spectrometry (MS) in parallel to ion trap MS. Organosulfates were only found in secondary organic aerosol from beta-pinene ozonolysis in the presence of acidic sulfate seed particles. One of the detected organosulfates also occurred in ambient aerosol samples that were collected at a forest site in northeastern Bavaria, Germany. beta-Pinene oxide, an oxidation product in beta-pinene/O3 and beta-pinene/NO3 reactions, is identified as a possible precursor for the beta-pinene-derived organosulfate. Furthermore, several nitroxy-organosulfates originating from monoterpenes were found in the ambient samples. These nitroxy-organosulfates were only detected in the nighttime samples, suggesting a role for nighttime chemistry in their formation. Their LC/MS chromatographic peak intensities suggest that they represent an important fraction of the organic mass in ambient aerosols, especially at night.     

Abnormal Grain Growth in Austenite Structure Reversely Transformed from Ferrite/Pearlite-Banded Structure

The grain growth behavior of austenite reversely transformed from ferrite/pearlite (F/P)-banded and non-banded steels has been studied. It was found that the grain-coarsening temperature [the temperature at which abnormal grain growth (AGG) occurs] of the initially banded F/P structure is quite low compared with that of the non-banded sample. In the F/P-banded sample, the abnormal grains always originate from the former ferrite region. The occurrence of AGG is essentially attributable not to the austenite nucleation process during heating but to the grain growth process after the completion of austenizing. It was proposed that the lowered grain-coarsening temperature in the banded structure is due to the non-uniform pinning-effect of AlN precipitates between former ferrite and pearlite regions.     

Low-resistance ultrashallow extension formed by optimized flash lamp annealing

Flash lamp annealing (FLA) technology is proposed as a new method of activating implanted impurities. By optimizing FLA and implantation conditions, junction depth (Xj) at the concentration of 1 /spl times/ 10/sup 18/ cm/sup -3/ and the sheet resistance of 13 nm and 700 /spl Omega//sq for As and 14 nm and 770 /spl Omega//sq for BF/sub 2/ with junction leakage lower than 1 /spl times/ 10/sup -16/ A//spl mu/m/sup 2/ at 1.5 V were successfully obtained without wafer slip and warpage problems.     

Vinyl ether‐based polyacetal polyols with various main‐chain structures and polyurethane elastomers prepared therefrom: Synthesis,structure, and functional properties

Novel acid degradable polyacetal polyols and polyacetal polyurethanes able to controlled acid degradation were developed. Polyacetal polyols with various main‐chain structures were synthesized by polyaddition of various vinyl ethers with a hydroxyl group [4‐hydroxy butyl vinyl ether (CH₂?CH? O? CH₂CH₂CH₂CH₂? OH), 2‐hydroxy ethyl vinyl ether (CH₂?CH? O? CH₂CH₂? OH), diethylene glycol monovinyl ether (CH₂?CH? O? CH₂CH₂OCH₂CH₂? OH), and cyclohexanedimethanol monovinyl ether (CH₂?CH? O? CH₂? C₆H₁₀? CH₂? OH)] with p‐toluenesulfonic acid monohydrate (TSAM) as a catalyst in the presence of the corresponding diols [1,4‐butandiol (HO? CH₂CH₂CH₂CH₂? OH), ethylene glycol (HO? CH₂CH₂? OH), diethylene glycol (HO? CH₂CH₂OCH₂CH₂? OH), and 1,4‐cyclohexanedimethanol (HO? CH₂? C₆H₁₀? CH₂? OH)], respectively. Polyacetal polyurethanes were prepared by a two‐step polymerization, using the synthesized polyacetal polyols, 4,4′‐diphenylmethane diisocyanate (MDI), and 1,4‐butandiol (BD) as a chain extender. Depending on the main‐chain structures, these polyurethanes had different glass transition temperature (from ?44 to 19 °C) and properties such as hydrophobic or hydrophilic. Polyurethanes containing the hydrophilic main‐chain exhibited the thermoresponsiveness and had the certain volume phase transition temperature (VPTT). The polyacetal polyurethanes were flexible elastomers around room temperature (～25 °C) and thermally stable (T_d ≥ 310 °C) and additionally exhibited smooth degradation with a treatment of aqueous acid in THF at room temperature to give the corresponding raw material diols. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44088.