Solid phase dosing and sampling technique to determine partition coefficients of hydrophobic chemicals in complex matrixes

Determination of polymer-water and dissolved organic carbon (DOC)-water distribution coefficients of very hydrophobic chemicals (log K0w > 6) is not straightforward. Poor water solubility of the test compounds complicates the spiking and analysis of actual freely dissolved concentrations. By dosing a system via a PDMS-fiber and monitoring the depletion in the polymer, spiking and analysis of concentrations in the aqueous phase are avoided, and sorption to the polymer and other hydrophobic phases can be determined easily and accurate. In this publication we report the determination of poly(dimethyl-siloxane) (PDMS)-water, and Aldrich humic acid-water distribution coefficients for six PAHs with log K0w values varying from 4.56 to 6.85. The distribution coefficients to a PDMS fiber llog Kf) and the DOC (log KDOC) range from 3.86 to 5.39 and 4.78 to 7.43, respectively. Even for the most hydrophobic compounds, the distribution coefficients show small standard errors (< or = 0.05 log units). Therefore, this method might be applied to determine sorption coefficients of numerous, even more hydrophobic compounds, to humic acids as well as other dissolved hydrophobic matrixes.     

Polymer-clay nanocomposites prepared via in situ emulsion polymerization

A series of novel polystyrene and poly(butyl methacrylate) montmorillonites (MMT-Na) nanocomposite latexes have been successfully prepared by emulsion polymerization. First of all, chemical modification of MMT-Na with a reactive coupling agent (MMT-QS) has been employed for the synthesis of hybrids. Subsequently, in situ seeded emulsion polymerization of hydrophobic vinyl monomers, such as butyl methacrylate and styrene, using sodium dodecyl sulfate (SDS) and ammonium persulfate (APS) as surfactant and initiator, respectively, were used for nanocomposite preparation. This technique allowed preparing of stable nanocomposite latexes with high (30–45 wt.%) solids contents and with loading of inorganic particles up to 5 wt.%. The prepared wet dispersions were subsequently characterized by light scattering method. In order to characterize the microstructure of the clay layers, and that of the organoclay in polystyrene and poly(butyl methacrylate) nanocomposites, wide and small angle X-ray analyses (WAXS, SAXS) and transmission electron microscopy (TEM) techniques were used.     

Survey of safe and hygienic practices among Slovenian sauerkraut growers

Food safety demands calls for new approaches to better understand the safe and hygienic practices of specific sectors in the food supply chain. In the present study, sauerkraut growers were investigated to explore their understanding of food safety and hygiene practices. A combination of quantitative (questionnaire prepared for the study) and qualitative (ten in-depth interviews) methods was used in the study so that topics could be discussed more completely and in greater depth. The results indicated that sauerkraut growers possess a rather good level of knowledge concerning food safety, although some gaps were discovered (e.g., record keeping and the feeling that recording data was an unnecessary burden, inadequate acquaintance with health status requirements, insufficient knowledge of the cabbage production process of food safety professionals, etc.). Some differences were found when comparing the results of the qualitative and quantitative studies. The qualitative analysis highlighted some contradictions (e.g., an attitude toward the production process: “We do not need the HACCP system”; a feeling concerning product safety: “Why the need for data recording?”) and differences between the sauerkraut growers and a professional understanding of good practice guidelines for sauerkraut production. All other determinations concerning food safety knowledge and practices are presented and discussed. The findings can be used as a guide for reorganizing current education programs aimed to improve safe and hygiene practices at the farm level.     

Organic Phenolic Configurationally Locked Polyene Single Crystals for Electro‐optic and Terahertz Wave Applications

We investigate a configurationally locked polyene (CLP) crystal 2‐(3‐(4‐hydroxystyryl)‐5,5‐dimethylcyclohex‐2‐enylidene)malononitrile (OH1) containing a phenolic electron donor, which also acts as a hydrogen bond donor. The OH1 crystals with orthorhombic space group Pna2₁ (point group mm2) exhibit large second‐order nonlinear optical figures of merit, high thermal stability and very favorable crystal growth characteristics. Higher solubility in methanol and a larger temperature difference between the melting temperature and the decomposition temperature of OH1 compared to analogous CLP crystals, are of advantage for solution and melt crystal growth, respectively. Acentric bulk OH1 crystals of large sizes with side lengths of up to 1 cm with excellent optical quality have been successfully grown from methanol solution. The microscopic and macroscopic nonlinearities of the OH1 crystals are investigated theoretically and experimentally. The OH1 crystals exhibit a large macroscopic nonlinearity with four times larger powder second harmonic generation efficiency than that of analogous CLP crystals containing dimethylamino electron donor. A very high potential of OH1 crystals for broadband THz wave emitters in the full frequency range of 0.1–3 THz by optical rectification of 160 fs pulses has been demonstrated.     

Fatty acid composition of eggs produced by the Slovenian autochthonous Styrian hen

The fatty acid composition of eggs produced by the autochthonous Styrian hen reared in two rearing systems was determined. Eggs were collected four times during the year. The fatty acid composition was determined by the in situ transesterification method and gas chromatography–flame ionisation detection (GC–FID). Eggs of the Styrian hen from free range contained significantly more α-linolenic, eicosapentaenoic (EPA), docosapentaenoic (DPA) and docosahexaenoic acid (DHA), as well as more total n−3 fatty acids. On the other hand, eggs from caged hens contained significantly more linoleic, arachidonic, as well as total polyunsaturated fatty acids (PUFA) and n−6 PUFA. The n−6/n−3 ratio was better from the nutritional point of view in eggs from free range. The fatty acid content is expressed in wt.%, as well as mg/100 g of yolk and mg/100 g of fresh egg, to better understand how much each of fatty acid is consumed with an edible portion.     

Numerical and experimental study of conjugate heat transfer in a horizontal air cavity

The demand for general reduction of the energy consumption in civil engineering leads to more frequent use of insulating materials with air gaps or cavities. Heat transfer through a constructional part can be decreased by adding an air gap and low emissivity reflective foils to the structure. In the first part of this paper, the impacts of cavity thickness and inner surface emissivity on combined conduction, convection and radiation heat transfer was experimentally explored in the case of constructional part with a horizontal cavity subjected to constant downward heat flux. The heat flow meter Netzsch HFM 436 Lambda was used for steady-state measurements. Results suggest that the studied parameters seriously affect the combined heat transfer in the composed structure. In the second part the paper reports the numerical study of two-dimensional conjugate heat transfer in closed horizontal cavity having air as the intervening medium. Numerical models validated by related experimental results were performed to further investigate the effect of radiation heat transfer. It was found that in general, the total heat flux through the composed structure decreases with increasing air cavity thickness, which is significant especially when low emissivity inner surfaces are taking into account. The direction of heat flow (downward or upward heat flow) has a significant impact on the convection heat transfer. An important contribution from the present work is the analysis of the optimal thickness of the cavity at different boundary conditions. The optimal thickness of the enclosure with low emissivity surfaces is 16 mm when subjected to upward heat flux.     

Treating Arterial Ageing in Patients with Diabetes: From Mechanisms to Effective Drugs

Diabetes mellitus is a major healthcare problem. It is not only characterized by hyperglycemia and chronic complications, but in longer lasting diabetes and a longer living population, it is also associated with accelerated arterial ageing, which importantly contributes to cardiovascular complications. The accelerated arterial ageing in patients with diabetes should be considered separately from arterial ageing in patients without diabetes. Basic and clinical research have allowed better insight into the mechanisms of arterial ageing. In a simplified mechanistic way, it could be considered that the three tightly connected cornerstone characteristics of arterial ageing in patients with diabetes are: phenotypic presentation as endothelial dysfunction and arterial stiffness, and the underlying basic ageing-facilitating mechanism represented as the impaired expression of genetic longevity pathways. Currently, specific drugs for preventing/treating arterial ageing are not available. Therefore, we aimed to review the capacity of available drugs, particularly antidiabetic drugs, to interfere with the arterial ageing process. In the near future, these characteristics could help to guide therapy in patients with diabetes. Overall, it appears that arterial ageing could become a new target in diabetes. The expanding knowledge regarding the capability of antidiabetic drugs and other available drugs to inhibit/delay arterial aging is therefore essential.     

The formation of Fe–Ga–In nanocomposite particles using mechanochemical interaction of Fe with the Ga–In eutectic

Mechanochemical interaction of Fe powder with the liquid Ga–In eutectic in the Fe-rich concentration corner of the Fe–Ga–In phase diagram was studied and compared with binary Fe–Ga and Fe–In specimens. Slow formation of diluted solid solutions in the Fe–In system was confirmed. In the Fe–Ga system, the dominant concentrated A2 solid solution is formed with H_eff?=?236 kOe, accompanied by ordered D0₃ and L1₂ phases. The Fe–Ga–In system features a stationary equilibrium between the concentrated A2 phase and D0₃ in the iron matrix.     

One-pot preparation of surface-functionalized barium titanate nanoparticles for high-K polystyrene composite films prepared via floating method

An advanced and inexpensive one-pot method to prepare polystyrene (PS)–barium titanate (BT) films by solution mixing is reported. The process was developed to obtain free-standing films with an increased dielectric constant (ε′). Since PS is soluble in apolar solvents, BT nanoparticles (BT-NPs) were surface-modified with palmitic acid (PAc) and embedded within the polymer matrix without affecting homogeneity and smoothness of the composite. The films were prepared by floating method consisting in dropping BT-NPs dispersed in PS/toluene solution on the water surface. After the evaporation of toluene, smooth, free-standing and thermally stable films were obtained with a markedly higher ε′ compared to the neat PS. PAc modification improved the dispersion of BT-NPs in the apolar phase and prevented their diffusion into the aqueous phase during the toluene evaporation. The proposed film-forming technique makes it possible to modulate the thickness and shape of the films by selecting the quantity and concentration of the organic phase and using various templates, thus opening up a broad range of applications.     

Mechanochemical syntheses of LiFeGe<Subscript>2</Subscript>O<Subscript>6</Subscript>-based nanocomposite and novel nanoglassy LiFeTi<Subscript>2</Subscript>O<Subscript>6</Subscript>

Two members of the pyroxene family, the germanate-type LiFeGe₂O₆ and the titanate-type LiFeTi₂O₆, are prepared for the first time via non-conventional one-step mechanosynthesis. The evolution of the as-prepared materials in the course of mechanosynthesis and their structural state on the long-range and local atomic scales are characterized by X-ray diffraction and ⁵⁷Fe Mössbauer spectroscopy, respectively. Both, the nanocrystalline nature of LiFeGe₂O₆ and the nanoglassy state of LiFeTi₂O₆ are revealed.