Arsenic accumulation and metabolism in rice (Oryza sativa L.)

The use of arsenic (As) contaminated groundwater for irrigation of crops has resulted in elevated concentrations of arsenic in agricultural soils in Bangladesh, West Bengal (India), and elsewhere. Paddy rice (Oryza sativa L.) is the main agricultural crop grown in the arsenic-affected areas of Bangladesh. There is, therefore, concern regarding accumulation of arsenic in rice grown those soils. A greenhouse study was conducted to examine the effects of arsenic-contaminated irrigation water on the growth of rice and uptake and speciation of arsenic. Treatments of the greenhouse experiment consisted of two phosphate doses and seven different arsenate concentrations ranging from 0 to 8 mg of As L(-1) applied regularly throughout the 170-day post-transplantation growing period until plants were ready for harvesting. Increasing the concentration of arsenate in irrigation water significantly decreased plant height, grain yield, the number of filled grains, grain weight, and root biomass, while the arsenic concentrations in root, straw, and rice husk increased significantly. Concentrations of arsenic in rice grain did not exceed the food hygiene concentration limit (1.0 mg of As kg(-1) dry weight). The concentrations of arsenic in rice straw (up to 91.8 mg kg(-1) for the highest As treatment) were of the same order of magnitude as root arsenic concentrations (up to 107.5 mg kg(-1)), suggesting that arsenic can be readily translocated to the shoot. While not covered by food hygiene regulations, rice straw is used as cattle feed in many countries including Bangladesh. The high arsenic concentrations may have the potential for adverse health effects on the cattle and an increase of arsenic exposure in humans via the plant-animal-human pathway. Arsenic concentrations in rice plant parts except husk were not affected by application of phosphate. As the concentration of arsenic in the rice grain was low, arsenic speciation was performed only on rice straw to predict the risk associated with feeding contaminated straw to the cattle. Speciation of arsenic in tissues (using HPLC-ICP-MS) revealed that the predominant species present in straw was arsenate followed by arsenite and dimethylarsinic acid (DMAA). As DMAA is only present at low concentrations, it is unlikely this will greatly alter the toxicity of arsenic present in rice.     

Calibration of an Absolute Radiation Thermometer for Accurate Determination of Fixed-Point Temperatures

For accurate determinations of thermodynamic temperature, NPL has developed its absolute radiation thermometer (ART), which is calibrated traceably against a cryogenic radiometer. This article reviews some of the potential sources of systematic uncertainty present in the calibration and use of ART. In particular, this article is concerned with the evaluation of the size-of-source effect and the lens transmittance, as well as potential differences in the responsivity of a transfer trap detector when calibrated in terms of radiant power and used in irradiance mode.     

A comparison of high-speed flywheels, batteries, and ultracapacitors on the bases of cost and fuel economy as the energy storage system in a fuel cell based hybrid electric vehicle

Fuel cells aboard hybrid electric vehicles (HEVs) are often hybridized with an energy storage system (ESS). Batteries and ultracapacitors are the most common technologies used in ESSs aboard HEVs. High-speed flywheels are an emerging technology with traits that have the potential to make them competitive with more established battery and ultracapacitor technologies in certain vehicular applications. This study compares high-speed flywheels, ultracapacitors, and batteries functioning as the ESS in a fuel cell based HEV on the bases of cost and fuel economy. In this study, computer models were built to simulate the powertrain of a fuel cell based HEV where high-speed flywheels, batteries, and ultracapacitors of a range of sizes were used as the ESS. A simulated vehicle with a powertrain using each of these technologies was run over two different drive cycles in order to see how the different ESSs performed under different driving patterns. The results showed that when cost and fuel economy were both considered, high-speed flywheels were competitive with batteries and ultracapacitors.     

Dissolution of various sources of gypsum in aqueous solutions and in soil

The dissolution of six sources of gypsum in water and 0.01 M CaCl₂ was examined in the presence and absence of soil. The gypsum samples included: analytical grade (AR), three sources of flue-gas desulphurisation (FGD) gypsum, phosphogypsum (PG), and mined gypsum (MG). Dissolution in aqueous solutions was monitored by measuring the concentration of calcium (Ca²⁺) and sulphate (SO) ions. In soils which adsorb small amounts of SO^?2₄, dissolution was estimated from the increase in the concentration of Ca²⁺ and SO in gypsum-treated soil over the control soil. However, in soils which adsorb significant amounts of SO, measurement of solution SO concentration underestimates the extent of dissolution. Gypsum dissolution was larger in water (15.20 mmol litre^?1) than in 0.01 M CaCl₂ (11.12 mmol litre^?1), and this was attributed to the Ca²⁺ common-ion effect. The rate of dissolution decreased in the order: AR > FGD > PG > MG. Dissolution was 2 to 10 times faster for powdered (< 500 .m) gypsum than for the discs obtained by pelletising. The differences in the rate of dissolution between the gypsum sources and between powder and disc samples were related to both surface area and the presence of CaCO₃, impurity. The rate of dissolution was 3 to 8 times faster in the presence than in the absence of soil. Whereas the dissolution of gypsum in the presence of soil followed first order reaction kinetics, it followed second order kinetics in the absence of soil. This difference in reaction kinetics resulted from the continuous removal of Ca2+ and SO by the soil.     

Maxwell and the science of colour

This non-technical review of Maxwell's contributions to the quantitative theory of colour was presented at a symposium in Aberdeen to celebrate the 150th anniversary of his appointment as professor of natural philosophy at Marischal College. Maxwell maintained his interest in the science of light and colour from his childhood to the last decade of his life. He lavished the same care and imagination on these studies as he did on his epochal contributions to electromagnetism and statistical physics.     

Miscibility of oligomeric poly(dimethyl siloxanes) with long-chain unbranched alkanes: 2. Unsymmetrical cloud point curves

Previously obtained cloud point curves for mixtures of oligomeric poly(dimethyl siloxanes) (weight fraction W₁) with oligomeric polyethylenes have been supplemented by the use of samples of higher molecular weight. Initial flat regions at low-medium W₁ as well as a slight shoulder at extremely high W₁ are now considered to be due to crystallization, since the temperatures at which they occur are the melting points of the oligoethylenes. The actual cloud point curves were of an unsymmetrical dome shape, the form of which could not be simulated by using a concentration-independent interaction parameter g in the Flory-Huggins equation. However, spinodals calculated by assuming a quadratic dependence of g on composition were of the same shape as the experimental cloud point curves. The critical compositions calculated on this basis were also close to the experimental ones.     

The ability of the rat to metabolize myristoyl-methionine: an acylamino acid with potentially useful antibacterial properties

Two experiments with Sprague Dawley rats tested their ability to hydrolyse myristoyl-methionine (M-M) into myristic acid and L-methionine (M). In the first experiment, lasting for 3 days. male rats were orally administered [9,10-3H]myristoyl-L-[35S]methionine. The recovery of radioactivity was approximately 90% for both isotopes; 19% of the administered 3H was recovered in the urine and 16% in the faeces, while the recovered 35S activity was 13 and 12%, respectively. The balance of the radioactivity was found among the tissues, organs and blood. In the second experiment, male and female rats received soybean-based diets which were supplemented with either 0.305% M-M or 0.2% M (both diets contained equal amounts of M) for periods up to 4 weeks. The growth rate of the rats receiving the 0.305% M-M diets was slightly slower than that for the rats on the 0.2% M diet, but the difference was not statistically significant (P > 0.05). The M-M rats had a transitory decrease in feed consumption, suggesting that palatability may have contributed to the growth difference and that a somewhat greater amount of M-M was necessary for the rat to attain the same growth rate as that produced by 0.2% M. When the amount of dietary M-M was increased to 3.05% M-M, a greater reduction in feed consumption and body weight gain was observed. This latter diet was an initial attempt to study the potential toxicity of M-M. None of the haematological, clinical chemistry or organ weight data suggested that M-M was overtly toxic per se, but longer-term feeding studies are needed to evaluate the potential toxicity of M-M more fully.     

Cyclic loading and fatigue in ice

Isotropic polycrystalline ice was subjected to cyclic loading in uniaxial compression at ?5°C, with stress limits 0–2 and 0–3 MPa, and frequencies in the range 0.043 to 0.5 Hz. Stress-strain records showed hysteresis loops progressing along the strain axis at non-uniform rates. The effective secant modulus, which was about half the true Young's modulus, decreased during the course of a test. The elastic strain amplitude and the energy dissipated during a loading cycle both increased with increase of time and plastic strain. Strain-time records gave mean curves which were identical in form to classical constant-stress creep curves, with a small cyclic alternation of recoverable strain about the mean curve. The inflection point of the “creep curve”, marking the transition from strain hardening to strain softening, occurred at a plastic strain of 1% (±0.1%), which is about the same as the “ductile failure strain” found in constant stress creep tests and in constant strain-rate tests on ice of the same type at the same temperature. The dissipation of strain energy up to this “failure point” was much higher for the cyclic tests than for corresponding quasi-static tests ? 100 to 600 kPa (or kN-m/m³) in comparison to about 30 kPa. The number of cycles taken to reach the “failure point” was of no direct significance, varying greatly with stress amplitude and with frequency. The results of the tests suggest that maximum resistance under compressive cyclic loading occurs at an axial plastic strain of about 1%, which is essentially the same as the failure strain for ductile yielding under constant stress and under constant strain-rate.     

The response of plasma parameters and energy transport in the plasma sheet to interplanetary magnetic field Bz

Science China Technological Sciences - We use 9 years data of Cluster to study the dependencies of plasma parameters and energy transport in the plasma sheet on the lasting time of...     

Composition of chlorinated hydrocarbon contaminants among major adipose tissue depots of polar bears (Ursus maritimus) from the Canadian high Arctic

Monitoring of environmental contaminants in Canadian Arctic polar bears (Ursus maritimus) typically has used superficial adipose tissue samples collected as part of controlled native subsistence hunts. However, little attention has been paid to the compositional difference in contaminants that may exist among the major adipose depots that are routinely collected. To address this knowledge gap, we investigated the profiles and concentrations of chlorinated hydrocarbon contaminants (CHCs), including major polychlorinated biphenyl (PCB) congeners and organochlorine (OC) pesticides and metabolites, in six major adipose depots (i.e. superficial, inter-muscular and intra-abdominal regions) obtained from adult male polar bears in the vicinity of Resolute Bay, Canadian high Arctic. Concentrations and congener patterns of PCBs (20 congeners) and OCs (14 compounds; chlordanes and dichlorodiphenyltrichloroethanes and metabolites, chlorinated benzenes, hexachlorocyclohexane isomers, octachlorostyrene and dieldrin) were found to be relatively uniform throughout the adipose tissue of male polar bears. The only exception was the inter-muscular adipose depot from the cervical region, which was characterized, compared to other major depots routinely sampled, by lower proportions of higher-chlorinated and recalcitrant congeners such as CB170/190, 180, 194 and 206, and higher contribution of the lower-chlorinated PCBs, CB47, 74 and 99. No difference in the OC makeup and concentrations was found among the adipose depots investigated. In view of this, we conclude that the determination of CHCs in adipose tissue of polar bears from any major depots, with the potential exception of the fat under the neck muscles, would give a representative picture of the overall CHC composition and concentrations in polar bear fat for purpose of trend monitoring.