Alumina scale growth at zirconia-MCrAlY interface: a microstructural study

High-temperature oxide scale growth at the ceramic-metal interface is a major contributor to the thermomechanical resistance of thermal barrier coatings for hot stages of gas turbines. In order to better understand this phenomenon, microstructural observations of the alumina scales formed at 1100 and 1200 °C under air, between low-pressure plasma-sprayed NiCrAlY and air plasma-sprayed ZrO₂-8.5 wt % Y₂O₃, have been performed by classical and analytical transmission electron microscopy on transverse thin foil specimens. The evolution of the oxide grain morphology from the metal-oxide to the oxide-oxide interface suggests that the scale growth principally takes place at the metal-oxide interface. Segregation of yttrium at oxide grain boundaries has been detected as well as significant quantities of zirconium inside the alumina grains. The oxide growth seems to be dominated by a classical grain-boundary oxygen diffusion mechanism. The presence of zirconium inside the alumina grains also suggests that Al₂O₃ partially forms by chemical reduction of ZrO₂ by AI. The comparison between the microstructures observed and that of alumina scales grown under similar conditions on bare MCrAlY alloys gives some insight into how the ceramic top-coat modifies NiCrAlY high-temperature oxidation mechanisms.     

In-laboratory removal of femoral sheath following protamine administration in patients having intracoronary stent implantation

Two hundred twenty-eight patients with successful coronary stent implantation were randomized either to protamine administration and femoral sheath removal (group I, n = 117) or no heparin neutralization and delayed sheath removal (group II, n = 111). The hospital stay after treatment was shorter in patients receiving protamine; therefore, protamine use for neutralizing circulating heparin may be safely administered immediately after stent implantation.     

A method for dynamic measurement of the resistance to dry heat exchange by footwear

Five different types of cold protective footwear have been tested with regard to their resistance to dry heat loss (i.e. the insulation) with a new electrically heated foot model. The model is able to simulate 'walking' movements in order to provide a more realistic simulation of wear conditions. Thermal insulation of shoes with and without a steel toe cap was the same. The insulating properties during simulated walking movements were 10-25% lower compared with static conditions. For two of the shoe models a significantly lower insulation value for the sole area was obtained when adding a weight of 30 kg. A significant difference could also be found between the insulation values of two different sizes of one of the models. Measurements with the standard method (EN 344) correlated well with the local insulation value of the sole part of the thermal foot. Correlation with the insulation value for the whole shoe was much less, variation was bigger and ranking in terms of cold protection differed between methods. The electrically heated foot model appears to provide a reproducible, accurate and more realistic method for measuring the insulation properties of shoes than EN 344.     

Surgical management of congenital high vaginal atresia

In the past 15 years five neonates and children have been treated for high vaginal atresia at the Surgical Unit of Department of Pediatrics, University Medical School, Pécs, Hungary. In three of the six patients distal atresia of the vagina was found (Type III). Two of the three were neonates and had a large hydrometrocolpos and the third, a 13-year-old girl, hematometrocolpos. In the fourth patient the vaginal atresia was associated with cloacal and anorectal malformation (Type V). In the fifth there was a duplication of uterus and vagina; however, only one of the two vaginas was atretic. In three patients a pull-through of the vagina was carried out, in one of them according to Pena, in another a transvesical approach, as suggested by Monfort, was used. Following repeated surgeries in the patient with cloacal malformation the vagina was replaced with large intestine. In the case of duplication of vagina and uterus one half of the duplication was removed.     

A one-site, two-state model for the binding of anions in photosystem II

Photosystem II membranes, dialyzed against a Cl(-)-free buffer to remove bound Cl-, lost about 65% of the control activity. A light-intensity study of the Cl(-)-free membranes showed that all PS II centers were able to evolve oxygen at about 35% of the control rate when measured in Cl(-)-free medium. The Cl(-)-depleted membranes were immediately (< 15 s) reactivated to 85-90% of the original activity by the addition of fairly high concentrations of Cl- (Kd = 0.5 mM), but both Cl- and the activity were promptly lost when the membranes immediately after reactivation were diluted in a Cl(-)-free medium. However, stabilization of Cl(-)-binding could be accomplished by prolonged incubation in the presence of Cl-. The transition to stable binding, followed using 36Cl-, occurred over several minutes. The stable binding was further characterized by a Kd of 20 microM and a t1/2 for dissociation of about 1h [Lindberg et al. (1993) Photosynth. Res. 38, 401-408]. The effects on S2 signals of removal of Cl- were studied using EPR. The depletion of Cl- was accompanied by a shift in intensity toward the g = 4.1 signal at the expense of the multiline signal. When Cl- or Br- but not F- was added to the depleted PS II membranes, the original distribution of the signals was immediately (< 30 s) restored. We propose that Cl(-)-binding responsible for high oxygen-evolution activity and normal EPR properties of the S2 state may occur either as high affinity (Kd = 20 microM) and slowly exchanging (t1/2 = 1 h), or as low affinity (Kd = 0.5 mM) and rapidly exchanging (t1/2 < 15 s). Our results suggest that Br- but not F- has a mode of binding similar to that of Cl-. The high-affinity state is the normal state of binding, but once Cl- has been removed, it will first rebind as low-affinity, rapidly exchanging followed by conversion into a high-affinity, slowly exchanging mode of binding.     

Expression of a mannose/fucose membrane lectin on human dendritic cells

Dendritic cells (CD) are the most efficient antigen presenting cells for T lymphocytes. CD1a+ CD14- CD with high antigen-presenting capacities can now be obtained easily from adherent peripheral blood monocytes by culture in the presence of granulocyte/macrophage colony-stimulating factor and interleukin-4 (Sallusto et al., J. Exp. Med. 1994. 179: 1109). Human macrophages express a membrane lectin, or sugar-specific receptor, which specifically mediates the binding and endocytosis of mannose- and fucose-terminated glycoproteins and is involved in the phagocytosis of pathogens. A similar lectin activity was sought on cultured human DC using flow cytometry and confocal microscopy to detect binding and internalization of fluoresceinated neoglycoproteins [bovine serum albumin (BSA) substituted with sugar residues]. Several neoglycoproteins, especially alpha-L-fucosyl-, alpha-D-mannosyl-, N,N'-di-acetyl-beta-chitobiosyl- and beta-D-glucosyl-BSA, were endocytosed by cultured human CD1a+ DC as well as by CD1a- CD14- cells which were also obtained in the culture. Fuc-BSA and Man-BSA had the same number of binding sites (1.7 x 10(6)/cell) on CD1a+ DC, and bound with an affinity constant close to 10(7) 1/mol. Inhibition experiments indicated that these two neoglycoproteins bound to the same membrane lectin. CD1a+ and CD1a- cells were both labeled by an antiserum specific for the human macrophage mannose receptor. The membrane lectin specific for mannose and fucose that is evidenced in these experiments on cultured DC may be similar to the macrophage membrane lectin or may share functional and structural properties with it.     

Effects of rilmenidine on rats made insulin resistant and hypertensive by a high fructose diet

This study was aimed to determine the effects of rilmenidine, an hypertensive drug, in an animal model of hypertension associated with insulin resistance, i.e. rats fed on a high fructose diet. Wistar rats were fed during four weeks either on a standard diet (S) or on a high fructose diet (F, 34.5% de fructose). In half of the F groups, rilmenidine (1 mg/kg/day) was added to the drinking water during the two last weeks of the diet (FR). Arterial blood pressure as well as insulin efficiency were determined at the end of the four weeks. Body weight gain was higher in F than in S rats (66 +/- 8 g versus 45 +/- 8 g; p < 0.05), this was prevented by rilmenidine treatment (32 +/- 2 g). Arterial systolic blood pressure was increased in F rats (162 +/- 2 vs 155 +/- 2 mmHg; p < 0.05), rilmenidine brought this value back to normal (149 +/- 3 mmHg). During the euglycemic hyperinsulinemic clamp, glucose utilization was lower (10 +/- 1 vs 14 +/- 1.5 mg/min/kg; p < 0.05) and hepatic glucose production higher (1 +/- 0.01 vs 0 mg/min/kg; p < 0.01) in F than in S rats. These changes in insulin action were totally abolished by rilmenidine. These data demonstrate that rilmenidine can ameliorate the deleterious effects of a high fructose diet, i.e. weight gain, hypertension and resistance to the effects of insulin Rilmenidine could represent a potential therapeutic agent for the treatment of hypertension associated with metabolic disorders such as syndrom X and obesity.     

Numerical study on PEMFC’s geometrical parameters under different humidifying conditions

Steady-state and three-dimensional simulations were carried out to study the influences of geometrical parameters on the performance of PEMFC under different hydrating conditions. Flow fields, species transport, transport of water in polymer membrane and movement of liquid water in cathode and anode porous layers were determined, in order to accomplish a complete estimation of ohmic and concentration losses of PEMFC power. The geometrical parameters were thickness of the polymer membrane, cathode catalyst layer as well as gas channel to rib width ratio. Every simulation was made under different relative humidities of inlet flows (50 and 100%) for every change of characteristic length. Results show that the influence of the geometrical parameters on ohmic and concentration losses is of considerable importance. The performance of PEMFC is seriously affected under dehydrating conditions. However, such performance may be considerably improved by using suitable geometrical parameters. Cathode and anode liquid saturation may not only affect the transport of species, but also the polymer electrolyte water content. These results show the importance of simultaneously calculating both the water absorption and desorption through the polymer electrolyte and the liquid saturation in the cathode and anode porous mediums to obtain an actual view of ohmic and concentration losses of the PEMFC performance.