大跨度钢桁架桥的施工与实践

介绍了天生桥一级水电站引水道进水塔大跨度钢桁架桥施工的全过程，包括制作，运输、安装、试验等几个部分，以供类似工程施工参考。     

表面粗糙度的自动确定

根据零件精度，在CAD系统中能够快速、准确地自动确定其表面粗糙度，从其间接关系上分析并推导出了一套实用的换算公式，并使用在某CAD中。     

用各向异性介质构造的一维光子晶体的特性分析

本文根据单轴晶体的传输矩阵，研究了一种由各向异性介质周期排列构成的一维光子晶体，分析了在不同入射角度和折射率条件下，该周期结构的反射和偏振的光学特性。分析结果表明，各向异性介质在折射率比值较大或与高折射率同性介绍结合使用，可获得较宽的禁带，并可实现在可见光范围内的全偏振全角度反射。     

分散网络制造浅谈

网络社会的制造业将是一个全球化的分散型的制造体系.分散网络制造是基于互联网的制造活动,因此,它具开放的、虚拟的,以及资源和技术更合理配置的特点.其组织模式是多种多样的,按现今国防工业现状,宜采用项目领导小组统一协调和控制下的分阶段动态联盟更为合适.为此,分析了网络无序化、企业属性知识不足、利益分配不易等问题带来的困难,并提出了一些建议.     

300脚MSA 10 Gbit/s Transponder模块

分析了开发10Gbit/sTransponder模块的必然性，介绍了10Gbit/sTransponder模块的原理、特点和参数指标。并且用开发出的两只40km300脚10Gbit/sTransponder模块成功地进行了43km的无误码传输试验和测试。     

电容位移法精确测量磁性薄膜的磁致伸缩系数

介绍了一种精确测量磁性薄膜磁致伸缩系数方法－电容位移法，并自行研制组装了一套测量装置，通过误差分析，仪器的精确标定，对稀土－铁超磁致伸缩薄膜的磁致伸缩系数进行了测量，获得满意的结果。     

聚焦光束稳态热晕补偿实验

进行了聚焦光束稳态热晕效应及自适应光学补偿的室内模拟实验观测，获得了在不同热畸变参数情况下，自适应光学系统开闭环时光束远场Strehl比和信标光波前方差的测量结果。测量结果表明自适应光学对聚焦光束整束热晕的补偿效果是显著的。在热畸变参数Nd大于170时，校正剩余波前大差呈非线性增长。在热畸变参数N_d与光束菲涅耳数N_f的比值大于1时，校正后的远场光斑峰值强度随入射功率的增加开始呈下降趋势。     

填料萃取塔的操作性能及设计计算

系统地介绍了填料抽提塔的两相流动及传质特性，设计计算，对填料塔的设计和操作有一定指导意义。     

Preparation of a pitch-based activated carbon with a high specific surface area

Pitch based activated carbons (PAC) with a high specific surface area were produced by a direct chemical activation route in which oxidative stabilized pitch derived from ethylene tar oil was reacted with potassium hydroxide under various activation conditions. It was found that PACs with a surface area of around 2600–3600 m² g^-1 could be obtained under suitable activation conditions. N₂ adsorption (at 77 K) and X-ray photoelectron spectroscopy experiments showed that the PAC has a uniformly developed micropore structure and a narrow pore size distribution (radius 0.8–1.6 nm). Abundant oxygen-containing functional groups (such as C–OH, C–O–C, C=O, COOR etc.) were found to exist on its surface. Compared with a commercially available activated carbon (AC) and also a pitch based activated carbon fibre, PAC has a quicker adsorption–desorption velocity and a larger adsorptive capacity to benzene due to its higher surface area. Clear surface differences between PAC and AC were observed by transmission electron microscopy. This revised version was published online in November 2006 with corrections to the Cover Date.     

A new kind of compound solid-state quasi-optical power combiner

In this paper, a new kind of solid-state quasi-optical power combiner is presented. It consists of two or more singlecavity multiple-device power combiners and a Fabry-Perot cavity. The experimenal results using six Gunn diodes at X-band show that the total output power is higher than 400 mW, the total combining efficiency is as high as 83%, and the frequency stability is better than 10^?5.