Solubility of helium in melts of the metallic glass system Pd-Ni-P and in related systems

Glass melts of the metallic alloy system Pd_10–70Ni_10–70P_14–26 were saturated with helium gas during the melt-spinning process. Some melts with platinum substituted for palladium; manganese, iron or cobalt for nickel; and boron for phosphorus could also be saturated. The helium could be extracted from the glasses and the amount of gas was quantitatively measured with a mass spectrometer. The helium solubilities, obtained between 750 and 1250° C, varied between about 2 and 45 (l He per mol glass) (T/273). These solubilities turned out to be strongly composition-dependent. This fact is discussed in terms of different short-range order structure units which are directly related to the free volume available for the gas solution process.     

Polymer melt elongation—methods,results, and recent developments

For film blowing of polyethylene it has been shown previously that melt elongation is very powerful for polymer characterization. With two types of rheometers, simple (also called “uniaxial”) elongational tests as well as creep tests can be performed homogeneously. In simple elongation, the melts of branched polyethylene show a remarkable strain hardening. With respect to their advantages and disadvantages, these rheometers complement each other. For multiaxial elongations the various modes of deformation can be performed by means of the rotary clamp technique. With the strain rate components ordered such that \documentclass{article}\pagestyle{empty}\begin{document}$ \dot \varepsilon $\end{document}₁₁ ? \documentclass{article}\pagestyle{empty}\begin{document}$ \dot \varepsilon $\end{document}₂₂ ≥ \documentclass{article}\pagestyle{empty}\begin{document}$ \dot \varepsilon $\end{document}₃₃, the ratio m = \documentclass{article}\pagestyle{empty}\begin{document}$ \dot \varepsilon $\end{document}₂₂/\documentclass{article}\pagestyle{empty}\begin{document}$ \dot \varepsilon $\end{document}₁₁ characterizes the test mode. The Stephenson definition of the elongational viscosities makes use of the linear viscoelastic material equation and proves to be very efficient because the linear shear viscosity (t) (“stressing” viscosity) can act as the reference for the nonlinear behavior in elongation. Results are given for polyisobutylene measured not only in simple, equibiaxial, and planar elongations, but also in new test modes with a change of m during the deformation. This allows one to investigate the consequences of a deformation-induced anisotropy of the rheological behavior.     

聚乙烯与聚丙烯单组分复合材料研究进展

综述了聚乙烯、聚丙烯单组分复合材料的发展概况及最新研究动态。介绍了熔融膜压法、粉末浸渍法、溶液浸渍法三类制备聚乙烯单组分复合材料的传统方法。重点介绍了热压法、共挤出热压法两类制备单组分复合材料的创新方法。分析了各制备方法的优缺点:熔融法、粉末法与溶液法效率均较低且复合材料中纤维含量较少,力学性能不佳;热压法由于初始材料为100％纤维,从而综合效率较高,力学性能良好,缺点为加工温度过于苛刻;共挤出热压法效率较高,在具有高的增强相含量的同时拥有较宽的加工温度范围,缺点为增强相强度需进一步提高。最后介绍了单组分复合材料的应用并对其研究与应用前景作了展望。     

A Distributed O(1)-Approximation Algorithm for the Uniform Facility Location Problem

We investigate a metric facility location problem in a distributed setting. In this problem, we assume that each point is a client as well as a potential location for a facility and that the opening costs for the facilities and the demands of the clients are uniform. The goal is to open a subset of the input points as facilities such that the accumulated cost for the whole point set, consisting of the opening costs for the facilities and the connection costs for the clients, is minimized. We present a randomized distributed algorithm that computes in expectation an ${\mathcal {O}}(1)$ -approximate solution to the metric facility location problem described above. Our algorithm works in a synchronous message passing model, where each point is an autonomous computational entity that has its own local memory and that communicates with the other entities by message passing. We assume that each entity knows the distance to all the other entities, but does not know any of the other pairwise distances. Our algorithm uses three rounds of all-to-all communication with message sizes bounded to $\mathcal{O}(\log(n))$ bits, where n is the number of input points. We extend our distributed algorithm to constant powers of metric spaces. For a metric exponent ?≥1, we obtain a randomized ${\mathcal {O}}(1)$ -approximation algorithm that uses three rounds of all-to-all communication with message sizes bounded to $\mathcal{O}(\log(n))$ bits.     

Wiederaufarbeitung von Kernbrennstoffen

Reprocessing of spent nuclear fuels . The present waste disposal concept for nuclear power plant requires the rapid construction of a reprocessing plant in the Federal Republic of Germany, with the location still being uncertain (Bavaria or Lower Saxony). The task of such a plant will consist in recovering usable nuclear fuels and processing them to new fuel elements. Waste materials are prepared for final disposal. The components of the plant are presented with their design data, associated development plans are discussed, and changes with respect to former plans, in particular the maintenance concept, are outlined. The article also reports the present status of the licensing procedure and current planning.     

High-pressure fluidized bed coating utilizing supercritical carbon dioxide

Various particles with sizes between 100 and 200 μm were encapsulated with waxes commonly used in technical coating applications. For this, a homogeneous mixture of molten paraffin and supercritical carbon dioxide was prepared in an autoclave and injected into the high-pressure fluidized bed through a nozzle from the bottom. Due to the different conditions in the mixing autoclave and the fluidized bed, the paraffin precipitated in the vicinity of the nozzle and adhered to the solid particles. A complete, thin, uniform, and solvent-free coating was produced. The use of two paraffins with different alkane compositions resulted in dissimilar spreads on glass beads due to their different glass transition temperatures. A smaller pressure drop across the nozzle led to more uniform and even coatings. Glass beads, ceramic spheres, potassium chloride, and lactose showed similar coating results, whereas different morphologies were observed with a plastic material, characterized by a rougher surface and a lower surface energy. The high quality of the coating was confirmed by standard dissolution tests with coated potassium chloride crystals and lactose agglomerates.