Gas-liquid mass transfer in taylor flow through a capillary

The gas-liquid mass transfer in two-phase flow through a capillary has been measured for water-air, ethanol-air and ethylene glycol-air systems. A semi-theoretical model has been developed and compared with experimental results. and a full computer simulations of the flow pattern and mass transfer using a flow simulation program have been made. The measured values are about 30% less than the calculated values.     

Cytokines and other markers of intrathecal immune response in patients with herpes simplex encephalitis

Sequential samples of serum and cerebrospinal fluid (CSF), from 9 patients with herpes simplex encephalitis (HSE), were analyzed for cytokines and soluble cytokine receptors. The response to herpes simplex virus was characterized by a vigorous compartmentalized immune response. The intrathecal response comprised three different phases: an acute stage (first week of illness), characterized by elevated CSF levels of interleukin (IL)-6 and interferon-gamma; an early convalescence stage (weeks 2-6 after onset of disease), associated with peaking levels of tumor necrosis factor-alpha and late markers of the specific T cell-mediated immune response, soluble IL-2 receptor, and soluble CD8 antigen (sCD8); and finally, a late convalescence stage, lasting months to years and associated with persistently increased levels of sCD8 in particular. These findings show the compartmentalization and kinetics of the inflammatory response in HSE and demonstrate persistence of the intrathecal inflammatory process, which may have implications for antiviral and antiinflammatory therapy.     

Psychological reactions during in-vitro fertilization: similar response pattern in husbands and wives

The purpose of this study was to examine differences in daily emotional, physical and social reactions among husbands and wives during in-vitro fertilization (IVF) or intracytoplasmic sperm injection (ICSI). Forty couples about to undergo ICSI or IVF at a private infertility clinic monitored their emotional, physical and social reactions daily for one complete treatment cycle from the first day of stimulation until the outcome of treatment was known (approximately 35 days). The results showed that men and women had a similar response pattern to oocyte retrieval, fertilization, embryo transfer and the pregnancy test. These stages were associated with the most significant changes in reactions for both spouses. The pattern of results suggested that the most important psychological determinant of reactions during IVF was the uncertainty of treatment procedures. Spouses appeared to be equally sensitive to this uncertainty and both appeared to respond to it with ambivalent feelings involving emotional distress and positive feelings of hope and intimacy.     

Plane strain ductility of zircaloy-4 tubes as dependent on structure and texture

Zircaloy-4 tubes were cold rolled 50 or 80% to a series of textures normal for regular tube production and finish annealed at 510 and 575°C. Two different types of ring expansion specimens giving local transverse deformation under a plane strain condition were developed. Plane strain tests were performed out-of-reactor at room temperature and 350°C, after which the plane strain ductility was measured as local transverse elongation. Both at room temperature and at 350°C tubes recrystallized at 575°C have higher plane strain ductility than tubes partially recrystallized at 510°C. The plane strain ductility is independent of the texture over the texture range of practical interest for regularly produced Zircaloy tubes. This seems to be a consequence of the fact that the stress ratio $\text{σ}{}_{\mathrm{\theta }}\text{: σ}{}_{\mathrm{z}}$ in plane strain loading varies with the texture in such a way that the degree of texture softening during deformation is the same for all canning tube textures.     

Simulating sliding wear with finite element method

Wear of components is often a critical factor influencing the product service life. Wear prediction is therefore an important part of engineering. The wear simulation approach with commercial finite element (FE) software ANSYS is presented in this paper. A modelling and simulation procedure is proposed and used with the linear wear law and the Euler integration scheme. Good care, however, must be taken to assure model validity and numerical solution convergence. A spherical pin-on-disc unlubricated steel contact was analysed both experimentally and with FEM, and the Lim and Ashby wear map was used to identify the wear mechanism. It was shown that the FEA wear simulation results of a given geometry and loading can be treated on the basis of wear coefficient−sliding distance change equivalence. The finite element software ANSYS is well suited for the solving of contact problems as well as the wear simulation. The actual scatter of the wear coefficient being within the limits of ±40–60% led to considerable deviation of wear simulation results. These results must therefore be evaluated on a relative scale to compare different design options.     

Extracting electrical material parameters of electrically large dielectric objects from reverberation chamber measurements of absorption cross section

Reverberation chambers can be used to measure the absorption cross section of a dielectric object. The absorption cross section of a dielectric object depends on its size, shape, and electrical material parameters. By comparing with a theoretical model of the absorption cross section, material parameters can be extracted from measurements. A model based on a plane wave approach of incident fields is used here, valid for electrically large material samples in an isotropic environment such as that in a reverberation chamber. Which material parameter can be extracted depends on the properties of the material sample. The presented method combines the accuracy of cavity methods with the flexibility of being able to measure samples of arbitrary size and shape. Because both the reverberation chamber and the material sample are electrically large, the method is particularly useful at millimeter-wave frequencies.     

STEAM DRYLNG OF WOOD FUELS

ABSTRACT

The objective of this work is to investigate some of the important aspects in the design of a steam band dryer for wood fuels. For this purpose the drying of the material in a bench-scale fixed bed dryer has been studied.

Drying times and thermal efficiencies for experiments conducted under different conditions are compared. The investigated materials are soft-and hardwood chips and softwood bark.

The thermal efficiency, the part of the sensible heat which is used during one passage of the steam through the bed, increases with increasing mass load (mass of dry matter per unit area) and with decreasing steam mass flux. At a mass load of 30 kg/m the thermal efficiency is about 0.85 even at steam mass fluxes as high as 0.6 kg/m² s (1.2 m/s). The thermal efficiency proves to be almost independent of pressure and temperature of the steam.

Due to the very inhomogeneous materials the steam mass flow distribution was uneven. This causes a decreased thermal efficiency. When bark     

Orange to green switching anthraquinone-based electrochromic material

An easily accessible anthraquinone-benzodithiophene-based high bandgap polymer (PTAq) was synthesized by Stille coupling reactions in remarkably high yield (96.5%). The highest occupied molecular orbital energy level of the polymer was estimated from the onset of oxidation in a cyclic voltammetry study to be −5.7 eV. PTAq showed an orange-to-green color switching with the application of a 1.0-V external potential to the polymer film, which was visible to the naked eye. The optical behavior change was also monitored using ultraviolet–visible absorption spectroscopy and revealed a respectable 75% transmittance change when the polymer film was subjected to a 1.0-V external potential. The high color contrast observed makes PTAq one of the most promising materials for electrochromic device applications. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47729.     

Use of the Cone Calorimeter and ConeTools software for development of innovative intumescing graphite systems

The Cone Calorimeter test method has been one of the most used small‐scale fire test method for years now and is at present widely spread over the world. In contrast to many other fire test methods, the Cone Calorimeter provides a range of data with sound scientific basis, which allows a wide range of applications. It can be used for modelling and also for enhanced product development. This paper describes the use of the Cone Calorimeter for the development of new innovative materials in combination with a mathematical model. As example, the cost effective development of an innovative intumescing graphite system for protecting particle board is explained. The performance goal of the project is to obtain the threshold values for a B class in the Single Burning Item (SBI) test method used for the newly developed Euroclass system. The focus of this paper is on the development tools and not on the chemical development of the protective system. During the research it was necessary to develop a new sample holder for the Cone Calorimeter. The results from the project show that the industry can save development time and resources by using the Cone Calorimeter in combination with a simple mathematical model. Copyright © 2010 John Wiley & Sons, Ltd.     

Multivariate analysis of a biologically activated carbon (BAC) system and its efficiency for removing PAHs and aliphatic hydrocarbons from wastewater polluted with petroleum products

The efficiency of a biologically activated carbon system for treating wastewater polluted with petroleum products was examined and the effects of process parameters on its efficacy were evaluated. In each experiment 17 alkylated and 19 non-alkylated polycyclic aromatic hydrocarbons (PAHs) and total petroleum hydrocarbons (TPHs, C₁₀–C₄₀) were extracted using semipermeable membrane devices from wastewater before and after treatment. The acquired data during experiments were analyzed using principal component analysis (PCA). The treatment system robustly removed dissolved PAHs across the studied ranges of the process parameters, providing overall removal efficiencies of 96.9–99.7% for the sum of 36 PAHs. However, the major contributor to their removal was sorption rather than biodegradation, and despite the general efficiency of the process there was up to a 9-fold range in the sums of quantified PAHs in the effluents between experiments. Combinations of long process contact time (24 h) with high temperature (24 °C) and moderate oxygen concentration (6–7 mg O₂ L⁻¹) resulted in good removal of bioavailable PAHs. The removal of TPHs was more dependent on biological activities during the wastewater treatment, and consequently more dependent on the process parameters. In addition, small but significant proportions of PAHs were volatilized and released during the wastewater treatment.