Relations between environmental black carbon sorption and geochemical sorbent characteristics

Pyrogenic carbon particles in sediments (soot and charcoal, collectively termed "black carbon" or BC) appear to be efficient sorbents of many hydrophobic organic compounds, so they may play an important role in the fate and toxicity of these substances. To properly model toxicant sorption behavior, it is important to (i) quantify the magnitude of the role of BC in sorption and (ii) elucidate which geochemical BC characteristics determine the strength of environmental BC sorption. Sorption isotherms of d10-phenanthrene (d10-PHE) were determined over a wide concentration range (0.0003-20 microg/L), for five sediments with widely varying characteristics. From the sorption isotherms, we determined Freundlich coefficients of environmental BC sorption, K(F,BCenv. These varied from 10(4.7) to 10(5.5). From the data, it could be deduced that BC was responsible for 49-85% of the total d10-PHE sorption at a concentration of 1 ng/L. At higher concentrations, the importance of BC for the sorption process diminished to <20% at 1 microg/L and 0-1% at 1 mg/L. There were no significant relationships between BC sorption strength and the tested geochemical BC characteristics [the fraction of small (<38 microm) BC particles, the BC resistance to high-temperature oxidation, the fraction of biomass-derived BC, the native polycyclic aromatic hydrocarbon and total organic carbon contents]. Because of the limited variation in BC sorption strength with widely varying BC characteristics, the presented BC sorption coefficients may putatively be used as generic starting points for environmental modeling purposes.     

Differentiation of apple juice samples on the basis of heat treatment and variety using chemometric analysis of MIR and NIR data

The potential of mid-infrared (MIR) and near-infrared (NIR) spectroscopy for their ability to differentiate between apple juice samples on the basis of apple variety and applied heat-treatment was evaluated. The heat-treatment involved exposure of juice samples (15 ml) for 30 s in a 900 W microwave oven and the apple varieties used to produce the juice samples were Bramley, Elstar, Golden Delicious and Jonagold. The chemometric procedures applied to the MIR and NIR data were partial least squares regression (PLS1 for differentiation on the basis of heat-treatment, PLS2 for varietal differentiation) and linear discriminant analysis (LDA) applied to principal component (PC) scores. PLS1 and PLS2 gave the highest level of correct classification of the apple juice samples according to heat-treatment (77.2% for both MIR and NIR data) and variety (78.3–100% for MIR data; 82.4–100% for NIR data), respectively.     

Application of principal component analysis to the prediction of lucerne forage protein content and in vitro dry matter digestibility by NIR spectroscopy

Application of principal component regression (PCR) was proposed for the development of a prediction equation of forage composition by near infra-red spectroscopy. PCR involves two steps: (a) the creation of new synthetic variables by principal component analysis (PCA) of spectral data, and (b) multiple linear regression with these new variables. Results obtained by this procedure have been compared with those generated by the conventional application of multiple linear regression (MLR) on spectral data. The comparison used the determination of protein content and in vitro dry matter digestibility (IVDMD) in 345 samples of lucerne forages. For protein determination, results of both procedures were quite similar (correlation coefficients: 0.978 and 0.980; standard errors of calibration: 0.86 and 0.84% DM; standard errors of prediction: 0.81 and 0.80% DM respectively for MLR and PCR prediction equations). The same was observed for IVDMD determination (correlation coefficients: 0.942 and 0.951; standard errors of calibration: 1.89 and 1.71% DM; standard errors of prediction: 2.22 and 2.22% DM, respectively). A large number of PCA variables were necessary for an accurate prediction of both constituents. The influence of the number of regression terms introduced in the PCR equation has been studied. The criterion for stopping the introduction of new terms in PCR did not seem as critical as in MLR.     

Self-foaming diphenolic acid benzoxazine

This work concerns the investigation of porous polybenzoxazines based on the non-toxic renewable diphenolic acid. The approach described relies on the in situ generation of foaming agent (CO₂) during the thermal curing. For this purpose, the previously synthesized benzoxazine monomer from diphenolic acid was thermally polymerized at different temperatures. As the beginning of decarboxylation is about 200 °C, we selected five foaming temperatures (T_f) ranging from 190 to 230 °C. The influence of the foaming temperature on the cellular structure and its dependency on final properties is discussed.     

Renewable polybenzoxazines based in diphenolic acid

The reaction of mixtures of renewable diphenolic acid (DPA) and its methylesterbenzoxazine derivative (MDP-Bz) has been studied. The DPA was introduced to lower the high temperature needed to complete the curing of the pure benzoxazine. In this way, samples with different DPA/MDP-Bz ratio (0, 2, 5, 10 and 25% of DPA) were investigated. Moreover, high performance flame retardant thermosetting resins with phosphorus were prepared through the mixture of MDP-Bz and a DPA-phosphazene derivative (DPA-PPZ). The curing behavior of these materials was studied by differential scanning calorimetry (DSC). Finally, the properties of the materials were evaluated by termogravimetric analysis (TGA), dynamic mechanical analysis (DMTA), tensile measurements, limiting oxygen index (LOI) and UL-94 Burn Test.     

Mobile Communication in Asia: Issues and Imperatives

This article introduces and provides the context for the themed section on mobile communication in Asia. It suggests that much work remains to be done in adequately grasping the new mobile, mediated face of communication in the very diverse Asian region. It also suggests that such a new direction in research needs to go hand in hand with rethinking the conceptual and theoretical bases of mobile, and indeed, Internet and computer‐mediated communication.     

基建仓库

基建仓库项目位于莱瓦顿的Harlingervaart运河岸边,作为周边建筑的仓库,它具有独特的趣味性良好的形体感,因此被认为是立于运河沿岸广场上的一座雕塑。建筑的入口处挑出悬臂,并且顺势突出建筑南侧的体量     

Leptosphaeria maculans-Brassica napus Battle: A Comparison of Incompatible vs. Compatible Interactions Using Dual RNASeq

Leptosphaeria maculans causes blackleg disease, which is one of the most destructive diseases of canola (Brassica napus L.). Due to the erosion of the current resistance in B. napus, it is pivotal to introduce new resistant genotypes to the growers. This study evaluated the potential of Rlm7 gene as resistance to its corresponding avirulence AvrLm7 gene is abundant. The Rlm7 line was inoculated with L. maculans isolate with AvrLm7; UMAvr7; and the CRISPR/Cas9 knockout AvrLm7 mutant, umavr7, of the same isolate to cause incompatible and compatible interactions, respectively. Dual RNA-seq showed differential gene expressions in both interactions. High expressions of virulence-related pathogen genes-CAZymes, merops, and effector proteins after 7-dpi in compatible interactions but not in incompatible interaction—confirmed that the pathogen was actively virulent only in compatible interactions. Salicyclic and jasmonic acid biosynthesis and signaling-related genes, defense-related PR1 gene (GSBRNA2T00150001001), and GSBRNA2T00068522001 in the NLR gene family were upregulated starting as early as 1- and 3-dpi in the incompatible interaction and the high upregulation of those genes after 7-dpi in compatible interactions confirmed the early recognition of the pathogen by the host and control it by early activation of host defense mechanisms in the incompatible interaction.     

Dynamic mechanical measurements: Comparison between bending and torsion methods on a graphite-reinforced and a rubber-modified epoxy

Dynamic mechanical measurements in the cantilever bending and torsion rectangular modes were compared on two epoxy samples: one unidirectionally reinforced by 42 vol.% graphite fibers, the other modified by 15 wt.% carboxy terminated acrylonitrile butadiene rubber. Two forced oscillation instruments were used: cantilever bending on a Polymer Labs DMTA and torsion with a Rheometrics System Four. In the cantilever mode, the storage modulus on both samples was measured at about two to three times too low because of compliance of the instrument. The two instruments agreed and appeared to measure accurately tan δ on the graphite-reinforced samples. Agreement was only fair on tan δ for the rubber-modified sample. Multiple frequency data were used to separate the glass-transition temperature of the rubber from the epoxy β transition. Activation energies of these transitions are within the range reported. This study demonstrates the value of forced oscillation methods and the importance of selecting sample dimensions to fit instrument limits.