Tensile strengthening in the nickel-base superalloy IN738LC

The tensile properties of superalloy IN738LC with different precipitate microstructures are evaluated at room temperature, 650 °C, 750 °C, and 85 °C at two different strain rates. The properties can be presented in two groups based on the comparable closeness of the values obtained—those of microstructures C and M, with coarse and medium size precipitates, and those of microstructures F and D, with fine and duplex size (medium + fine) precipitates. Preferred orientations, lattice parameters, and metallography are used to characterize the microstructure and tensile testing to determine the yield strength, tensile strength, and strain hardening coefficients. An anomalous increase in yield strength is observed, which occurs at temperatures about 100 °C higher with higher strain rate than with lower strain rate applied. The experimental results show that the yield strength is influenced by preferred orientations and precipitate size, while the tensile strength is effected by the size and morphology of precipitates.     

CRISPR Therapeutics for Duchenne Muscular Dystrophy

Duchenne muscular dystrophy (DMD) is an X-linked recessive neuromuscular disorder with a prevalence of approximately 1 in 3500–5000 males. DMD manifests as childhood-onset muscle degeneration, followed by loss of ambulation, cardiomyopathy, and death in early adulthood due to a lack of functional dystrophin protein. Out-of-frame mutations in the dystrophin gene are the most common underlying cause of DMD. Gene editing via the clustered regularly interspaced short palindromic repeats (CRISPR) system is a promising therapeutic for DMD, as it can permanently correct DMD mutations and thus restore the reading frame, allowing for the production of functional dystrophin. The specific mechanism of gene editing can vary based on a variety of factors such as the number of cuts generated by CRISPR, the presence of an exogenous DNA template, or the current cell cycle stage. CRISPR-mediated gene editing for DMD has been tested both in vitro and in vivo, with many of these studies discussed herein. Additionally, novel modifications to the CRISPR system such as base or prime editors allow for more precise gene editing. Despite recent advances, limitations remain including delivery efficiency, off-target mutagenesis, and long-term maintenance of dystrophin. Further studies focusing on safety and accuracy of the CRISPR system are necessary prior to clinical translation.     

Efficient manganese decorated cobalt based catalysts for hydrogenation of 5-hydroxymethylfurfural (HMF) to 2,5-dimethylfuran (DMF) biofuel

2,5-dimethylfuran (DMF) is a promising compound in the production of biofuel with high-quality properties. In this study, it is aimed to develop new efficient catalysts to synthesize DMF from 5-hydroxymethylfurfural (HMF). Co, Mn/Co, and Ru/Co catalysts were prepared using the NaBH₄ reduction method. The catalysts were subjected to activity tests for the hydrogenation of HMF to DMF by changing the reaction parameters, such as temperature and time. Mn/Co catalysts prepared from metal precursors at various molar ratios of Mn/Co were found to be effective in hydrogenation reactions of HMF to DMF. A 91.8% DMF yield was achieved in the presence of a Mn/Co (50/50) catalyst without noble metal at 180°C for 4 hours. The Brunauer-Emmet-Teller (BET) method, x-ray diffraction (XRD), x-ray photoelectron spectroscopy (XPS), and induction coupled plasma mass spectroscopy (ICP-MS) techniques were used to characterize the efficient Mn/Co catalyst.     

Evaluating the in vitro bioaccessibility of phenolics and antioxidant activity during consumption of dried fruits with nuts

Dried fruits and nuts are considered as healthy snacks and they are often consumed together in the Turkish diet. In order to investigate the effect of codigestion of dried fruits (figs, apricots, raisins) together with nuts (almonds, walnuts, hazelnuts), total phenolics (TP) and total antioxidant capacity (TAC) have been evaluated spectrophotometrically at different phases of simulated gastrointestinal (GI) digestion, using an in vitro model. TP, ABTS and CUPRAC results revealed that for all fruit–nut mixtures, the amount recovered in the dialyzed fraction was lower than the recovery of fruits or nuts alone, indicating an antagonistic effect. On the other hand, DPPH results showed that for fig–walnut, fig–hazelnut and apricot–hazelnut mixtures the quantity recovered in the dialyzed fractions were 35–107% higher than the recovery of fruits or nuts alone, representing a synergistic effect. Similarly, FRAP results also demonstrated a synergistic effect in case of fig–walnut, apricot–walnut and apricot–hazelnut mixtures (10–74% higher recovery). Current study provides valuable insights into the changes taking place during in vitro GI digestion of dried fruits and nuts.     

Performance evaluation of a submerged membrane bioreactor for the treatment of brackish oil and natural gas field produced water

Produced water, which is co-produced during oil and gas manufacturing, represents one of the largest sources of oily wastewaters. Therefore, treatment of this produced water may improve the economic viability and lead to a new source of water for beneficial use. In this study a submerged hollow fiber membrane bioreactor (MBR) has been studied experimentally for the treatment of brackish oil and natural gas field produced water. This type of wastewater is also characterized with relatively moderate to high amount of salt, oil and total petroleum hydrocarbons (TPH). However, the bacteria which are growing in conventional activated sludge and MBR cannot survive at these strict conditions, therefore acclimation of the bacteria is of vital importance. The performance of the biological system, membrane permeability, the rate and extent of TPH biodegradability have been investigated under different sludge age and F/M ratios. The results obtained by gas chromatography analyses showed that the MBR system could be very effective in the removal of TPH from produced water and a significant improvement in the effluent quality was achieved.     

Production of the biomimetic small diameter blood vessels for cardiovascular tissue engineering

A novel biomimetic vascular graft scaffolds were produced by electrospinning method with the most superior characteristics to be a proper biomimetic small diameter blood vessel using Polycaprolactone(PCL), Ethyl Cellulose(EC) and Collagen Type-1 were used to create the most convenient synergy of a natural and synthetic polymer to achieve similarity to native small diameter blood vessels. Scanning Electron Microscopy(SEM), Fourier Transform Infrared Spectroscopy(FTIR), Differential Scanning Calorimetry Analysis(DSC), tensile measurement tests, and in-vitro and in-vivo applications were performed. Results indicated significant properties such as having 39.33?nm minimum, 104.98?nm average fiber diameter, 3.2?MPa young modulus and 135% relative cell viability.     

A Thienothiophene-Based Cation Treatment Allows Semitransparent Perovskite Solar Cells with Improved Efficiency and Stability

Perovskite surface treatment with additives has been reported to improve charge extraction, stability, and/or surface passivation. In this study, treatment of a 3D perovskite ((FAPbI₃)_1−x(MAPbBr₃)_x) layer with a thienothiophene-based organic cation (TTMAI), synthesized in this work, is investigated. Detailed analyses reveal that a 2D (n = 1) or quasi-2D layer does not form on the PbI₂-rich surface 3D perovskite. TTMAI-treated 3D perovskite solar cells (PSCs) fabricated in this study show improved fill factors, providing an increase in their power conversion efficiencies (PCEs) from 17% to over 20%. It is demonstrated that the enhancement is due to better hole extraction by drift-diffusion simulations. Furthermore, thanks to the hydrophobic nature of the TTMAI, PSC maintains 82% of its initial PCE under 15% humidity for over 380 h (the reference retains 38%). Additionally, semitransparent cells are demonstrated reaching 17.9% PCE with treated 3D perovskite, which is one of the highest reported efficiencies for double cationic 3D perovskites. Moreover, the semitransparent 3D PSC (TTMAI-treated) maintains 87% of its initial efficiency for six weeks (>1000 h) when kept in the dark at room temperature. These results clearly show that this study fills a critical void in perovskite research where highly efficient and stable semitransparent perovskite solar cells are scarce.