Automated extraction and classification of thunderstorm and non-thunderstorm wind data for extreme-value analysis

Design wind loads are partly based on extreme value analyses of historical wind data, and limitations on the quantity and spatial resolution of wind data pose a significant challenge in such analyses. A promising source of recent wind speed and direction data is the automated surface observing system (ASOS), a network of about 1000 standardized US weather stations. To facilitate the use of ASOS data for structural engineering purposes, procedures and software are presented for (a) extraction of peak gust wind data and thunderstorm observations from archived ASOS reports, (b) classification of wind data as thunderstorm or non-thunderstorm to enable separate analyses, and (c) construction of data sets separated by specified minimum time intervals to ensure statistical independence. The procedures are illustrated using approximately 20-year datasets from three ASOS stations near New York City. It is shown that for these stations thunderstorm wind speeds dominate the extreme wind climate at long return periods. Also presented are estimates based on commingled data sets (i.e., sets containing, indiscriminately, both non-thunderstorm and thunderstorm wind speeds), which until now have been used almost exclusively for extreme wind speed estimates in the US. Analyses at additional stations will be needed to check whether these results are typical for locations with both thunderstorm and non-thunderstorm winds.     

Molecular Heterojunctions of Oligo(phenylene ethynylene)s with Linear to Cruciform Framework

Electrical transport properties of molecular junctions are fundamentally affected by the energy alignment between molecular frontier orbitals (highest occupied molecular orbital (HOMO) or lowest unoccupied molecular orbital (LUMO)) and Fermi level (or work function) of electrode metals. Dithiafulvene (DTF) is used as substituent group to the oligo(phenylene ethynylene) (OPE) molecular wires and different molecular structures based on OPE3 backbone (with linear to cruciform framework) are achieved, with viable molecular orbitals and HOMO–LUMO energy gaps. OPE3, OPE3–DTF, and OPE3–tetrathiafulvalene (TTF) can form good self‐assembled monolayers (SAMs) on Au substrates. Molecular heterojunctions based on these SAMs are investigated using conducting probe–atomic force microscopy with different tips (Ag, Au, and Pt) and Fermi levels. The calibrated conductance values follow the sequence OPE3–TTF > OPE3–DTF > OPE3 irrespective of the tip metal. Rectification properties (or diode behavior) are observed in case of the Ag tip for which the work function is furthest from the HOMO levels of the OPE3s. Quantum chemical calculations of the transmission qualitatively agree with the experimental data and reproduce the substituent effect of DTF. Zero‐bias conductance, and symmetric or asymmetric couplings to the electrodes are investigated. The results indicate that improved fidelity of molecular transport measurements may be achieved by systematic studies of homologues series of molecular wires applying several different metal electrodes.     

Transcranial Magnetic Stimulation of the Supplementary Motor Area in the Treatment of Obsessive-Compulsive Disorder: A Multi-Site Study

Recently, strategies beyond pharmacological and psychological treatments have been developed for the management of obsessive-compulsive disorder (OCD). Specifically, repetitive transcranial magnetic stimulation (rTMS) has been employed as an adjunctive treatment in cases of treatment-refractory OCD. Here, we investigate six weeks of low frequency rTMS, applied bilaterally and simultaneously over the sensory motor area, in OCD patients in a randomized, double-blind placebo-controlled clinical trial. Twenty-two participants were randomly enrolled into the treatment (ACTIVE = 10) or placebo (SHAM = 12) groups. At each of seven visits (baseline; day 1 and weeks 2, 4, and 6 of treatment; and two and six weeks after treatment) the Yale-Brown Obsessive Compulsive Scale (Y-BOCS) was administered. At the end of the six weeks of rTMS, patients in the ACTIVE group showed a clinically significant decrease in Y-BOCS scores compared to both the baseline and the SHAM group. This effect was maintained six weeks following the end of rTMS treatment. Therefore, in this sample, rTMS appeared to significantly improve the OCD symptoms of the treated patients beyond the treatment window. More studies need to be conducted to determine the generalizability of these findings and to define the duration of rTMS’ clinical effect on the Y-BOCS. Clinical Trial Registration Number (NCT) at www.clinicaltrials.gov: {"type":"clinical-trial","attrs":{"text":"NCT00616486","term_id":"NCT00616486"}}NCT00616486.     

The Role of Plasma Extracellular Vesicles in Remote Ischemic Conditioning and Exercise-Induced Ischemic Tolerance

Ischemic conditioning and exercise have been suggested for protecting against brain ischemia-reperfusion injury. However, the endogenous protective mechanisms stimulated by these interventions remain unclear. Here, in a comprehensive translational study, we investigated the protective role of extracellular vesicles (EVs) released after remote ischemic conditioning (RIC), blood flow restricted resistance exercise (BFRRE), or high-load resistance exercise (HLRE). Blood samples were collected from human participants before and at serial time points after intervention. RIC and BFRRE plasma EVs released early after stimulation improved viability of endothelial cells subjected to oxygen-glucose deprivation. Furthermore, post-RIC EVs accumulated in the ischemic area of a stroke mouse model, and a mean decrease in infarct volume was observed for post-RIC EVs, although not reaching statistical significance. Thus, circulating EVs induced by RIC and BFRRE can mediate protection, but the in vivo and translational effects of conditioned EVs require further experimental verification.     

Utilizing Iron's Attractive Chemical and Magnetic Properties in Microrocket Design,Extended Motion,and Unique Performance

All‐in‐one material for microrocket propulsion featuring acid‐based bubble generation and magnetic guidance is presented. Electrochemically deposited iron serves as both a propellant, toward highly efficient self‐propulsion in acidic environments, and as a magnetic component enabling complete motion control. The new microrockets display longer lifetime and higher propulsion efficiency compared to previously reported active metal zinc‐based microrockets due to the chemical properties of iron and the unique structure of the microrockets. These iron‐based microrockets also demonstrate unique and attractive cargo towing and autonomous release capabilities. The latter is realized upon loss of the magnetic properties due to acid‐driven iron dissolution. More interestingly, these bubble‐propelled microrockets assemble via magnetic interactions into a variety of complex configurations and train structures, which enrich the behavior of micromachines. Modeling of the magnetic forces during the microrocket assembly and cargo capture confirms these unique experimentally observed assembly and cargo‐towing behaviors. These findings provide a new concept of blending propellant and magnetic components into one, toward simplifying the design and fabrication of artificial micro/nanomachines, realizing new functions and capabilities for a variety of future applications.     

Iron chalcogenide superconductors at high magnetic fields

Iron chalcogenide superconductors have become one of the most investigated superconducting materials in recent years due to high upper critical fields, competing interactions and complex electronic and magnetic phase diagrams. The structural complexity, defects and atomic site occupancies significantly affect the normal and superconducting states in these compounds. In this work we review the vortex behavior, critical current density and high magnetic field pair-breaking mechanism in iron chalcogenide superconductors. We also point to relevant structural features and normal-state properties.     

Label-free determination of picogram quantities of DNA by stripping voltammetry with solid copper amalgam or mercury electrodes in the presence of copper

Highly sensitive label-free techniques of DNA determination are particularly interesting in relation to the present development of the DNA sensors. We show that subnanomolar concentrations (related to monomer content) of unlabeled DNA can be determined using copper solid amalgam electrodes or hanging mercury drop electrodes in the presence of copper. DNA is first treated with acid (e.g., 0.5 M perchloric acid), and the acid-released purine bases are directly determined by the cathodic stripping voltammetry. Volumes of 5-3 microL of acid-treated DNA can easily be analyzed, thus making possible the determination of picogram and subpicogram amounts of DNA corresponding to attomole and subattomole quantities of 1000-base pair DNA. Application of this determination in DNA hybridization detection is demonstrated using surface H for the hybridization (superparamagnetic beads with covalently attached DNA probe) and the mercury electrodes only for the determination of DNA selectively captured at surface H.     

Electric spark discharge as an ultrasonic generator in flow measurement situations

In this paper, a gap discharge approach to create acoustic signals for ultrasonic low pressure gas flow measurements is investigated. The objective is to develop an ultrasonic gas flow meter system that is capable of operation in extreme industrial environments. These environments might have extremely high temperatures (1200 °C), moisture, steam, dust, low gas pressure and large transmission distances.Most other types of ultrasonic transducers found show sensitivity to such conditions: their operation suffers, or they may even stop functioning if exposed to such environments. The development of new transducer technology is therefore crucial to allow ultrasonic flow measurements in extreme industrial environments. In this paper, the gap discharge emitter is evaluated as a candidate to be used in these applications. Its capabilities as a sound source are investigated, and its impact on flow meter performance is estimated. It can be concluded that, despite the uncertainties it introduces to a flow meter system, it stands out as a strong candidate to be used as an acoustic emitter in a gas flow meter system for extreme environments.