On the detection of Cardiac Arrhythmia with Principal Component Analysis

Wireless Personal Communications - The Electrocardiogram (ECG) signal is used to record the electrical activity of heart. The subtle variations in ECG attributes are used by cardiologists for...     

Tunable Thermoelectric Performance in Porous Armchair Graphene Nanoribbons as a Function of Strain,Pore Morphology and Temperature

In this paper, the thermoelectric performance of porous armchair graphene nanoribbons under tensile and compressive strain is investigated as a function of pore morphology and temperature. For all the porous structures irrespective of their pore size, the performance improves at a compressive strain of 10%, while for tensile nature, the minimum cut-off strain required for improved thermoelectric figure of merit (ZT) shows an inverse relation with the pore size. In addition, optimal pore shape geometry can yield better performance, even at lower values of strain. Further analysis reveals that tensile strain is not able to improve the performance at low and intermediate temperatures of around 300 K, whereas tensile/compressive strain is effective in enhancing the performance of porous armchair graphene nanoribbons at higher temperatures. Furthermore, the structures are found to be more sensitive to compressive strain than the tensile one since the effect of compressive strain is found to improve ZT more significantly. Our analysis based on Non-Equilibrium Green’s function calculations suggests a possible route for tailoring the functionality of nanomaterials so as to achieve great potentials for thermoelectric applications at various temperatures.     

Conventional and Non-conventional Edible Oils: An Indian Perspective

The Indian dietary pattern has undergone major changes over the past 40 years. Many of these changes involve modification in dietary intake of fats and oils. In developing countries like India, vegetable oils are replacing animal fats because of the cost and health concerns. A wide range of vegetable oils are available in the market but the choice of healthy cooking oil has been a controversial subject since ideas keep on changing as new evidence accumulates. One of the factors holding back the increased use of value-added healthy oils in India is that most potential consumers are genuinely not aware of their health benefits. Edible oil consumption is primarily a community-driven phenomenon in India. The purpose of this paper is to highlight the current scenario of edible oils in India, their composition, health benefits, food applications, stability issues and future aspects as buying the right oil for health has become of great importance.     

Comparison of Ferrous Calcium Silicate Slag and Calcium Ferrite Slag Interactions with Magnesia-Chrome Refractories

The cost of maintaining and eventually replacing refractories as a result of slag attack is a significant cost component in the copper industry. Converting matte to blister copper takes place in reactors lined with direct-bonded magnesia-chrome refractories, and several continuous converting operations use calcium ferrite slag. Unfortunately, the low viscosity of calcium ferrite slag makes it aggressive toward the refractories. Ferrous calcium silicate (FCS) slag has been proposed as a replacement; however, the effect of this slag on magnesia-chrome refractories has not been studied. In this work, the interactions between FCS slag and magnesia-chrome refractory at 1573 K (1300 °C) with an oxygen partial pressure of 10⁻⁶ atm were studied and compared with that experienced with calcium ferrite slag under the same conditions. Both slags penetrated the pores in the refractory and caused compositional change in the chromite spinel intergranular bonding phase through cation interdiffusion, which resulted in cracking and debonding of periclase grains. It was observed that the refractory was penetrated much more deeply by calcium ferrite slag than FCS slag because of the higher surface tension and lower viscosity of calcium ferrite slag. As a result, the refractory was attacked less by FCS slag than it was by calcium ferrite slag. It is concluded that the use of FCS slag in continuous copper converting is likely to extend refractory life.     

Versatility of Radio Frequency Identification (RFID) Tags in the Pharmaceutical Industry

Abstract

Radio Frequency Identification (RFID) technology can be applied to a number of pharmaceutical processes, as ample of information can be stored and read rapidly from an RFID tag. Applications may range from inventory control, to access control, to telemedicine, to supply chain management and, most importantly, in combatting counterfeit products. Overall health care services can be improved by using this technology. This technology is gaining popularity in various fields, but is still costly and regulatory considerations are restricting its use. This paper explains the basics of RFID technology and some potential applications related to the pharmaceutical industry.     

Rapid detection and quantification of soya bean oil and common sugar in bovine milk using attenuated total reflectance–fourier transform infrared spectroscopy

Attenuated total reflectance–Fourier transform infrared spectroscopy, along with chemometrics, were used to detect and quantify soya bean oil (SO) and sugar (CS) adulteration in milk. Bovine milk was artificially adulterated with SO (0.2–2.0%; v/v) and CS (1–10%; w/v) separately. Spectra revealed significant differences in specific wavenumber regions (SO: 1450–1250 cm^?1; CS: 1200–900 cm^?1). Soya bean oil adulteration was best predicted in wavenumber range of 1262–1164 cm^?1, using partial least square regression (coefficient of determination (R²: 0.90 and 0.88 for calibration and validation, respectively). Common sugar adulteration was best predicted in wavenumber range of 1010–910 cm^?1 (R²: 0.99 for calibration and validation) using partial least square.     

Selective solid-phase extraction of rare earth elements by the chemically modified Amberlite XAD-4 resin with azacrown ether

A selective solid-phase extraction procedure using chemically modified Amberlite XAD-4 with monoaza dibenzo 18-crown-6 ether was investigated for the preconcentration and separation of La(III), Nd(III) and Sm(III) in synthetic solution. Before loading samples on synthesized adsorbent adjust pH 4.5 by suitable buffer solution. The adsorbed rare earth elements were eluted by 2 M hydrochloric acid. Various parameters like preconcentration, breakthrough capacity, flow rate were investigated. The limits of detection (n = 5) and limits of quantification (n = 5) for La(III), Nd(III) and Sm(III) were founded 3.9, 4.2 and 7.4 μg L^?1 and 13, 15 and 26 μg L^?1, respectively. The eluted metal ions were determined by ICP-AES.