Modelling and kinetic aspects of a BTEX contaminated air-treating biofilter

In this study, the overall performance of a biofilter was evaluated in terms of its elimination capacity by using 3-D mesh techniques. The overall results indicate that the agreement between experimental data and model predictions is excellent for benzene, toluene, ethylbenzene and o-xylene (BTEX). In this study, the maximum removal rate (r _max) values for BTEX were 0.0117, 0.0126, 0.0081 and 0.0146 g m^–3 h^–1, and the half-saturation constant (K_S ) values were calculated to be 0.269, 0.297, 0.156 and 0.394 g m^–3, respectively. For this system, the coefficients of determination (r ²) of BTEX compounds were greater than 0.97. The BTEX concentration profiles along the depth were also determined using a convection–diffusion reactor (CDR) model. The sums of squares of the errors (SSEs) of BTEX were 0.0078, 0.0059, 0.0129 and 0.0269, respectively, with r ² values greater than 0.99 for all four compounds at low concentrations.     

Strategies for the construction sector in the information technology era

The construction industries in many countries are starting to consider seriously the strategic use of information technology (IT). The use of information technology in construction is extending beyond the stage of piecemeal application for improving the efficiency of discrete operations by individual organizations to the advanced stage where IT is applied strategically in commercial enterprises, government agencies and professional institutions. Progress in construction in this regard appears to lag behind that in most other sectors of the economy. This paper considers the nature and the background of this progression in construction by examining proposals by Earl (1989) of nine basic prerequisites to the IT era which make a strategic approach timely. Each prerequisite is outlined and how it has been met in other sectors of the economy considered. The extent to which these prerequisites apply in construction and the scope for their application in the near future are examined. It is argued that all organizations involved in construction will ultimately have to think strategically about their use of IT, and how some are already doing so is described.

In discussing the factors which hinder the strategic application of IT in construction, the nature of the design and construction processes and initiatives that may be necessary to overcome the perceived problems are examined in detail. The strategies that are evolving at a national level in Singapore are outlined.     

Microfluidics as an Enabling Technology for Personalized Cancer Therapy

Tailoring patient‐specific treatments for cancer is necessary in order to achieve optimal results but requires new diagnostic approaches at affordable prices. Microfluidics has immense potential to provide solutions for this, as it enables the processing of samples that are not available in large quantities (e.g., cells from patient biopsies), is cost efficient, provides a high level of automation, and allows the set‐up of complex models for cancer studies. In this review, individual solutions in the fields of genetics, circulating tumor cell monitoring, biomarker analysis, phenotypic drug sensitivity tests, and systems providing controlled environments for disease modeling are discussed. An overview on how these early stage achievements can be combined or developed further is showcased, and the required translational steps before microfluidics becomes a routine tool for clinical applications are critically discussed.     

Impacts of CO2 emission constraints on technology selection and energy resources for power generation in Bangladesh

This paper examines the impacts of CO₂ emission reduction target and carbon tax on future technologies selection and energy use in Bangladesh power sector during 2005–2035. The analyses are based on a long-term energy system model of Bangladesh using the MARKAL framework. The analysis shows that Bangladesh will not be able to meet the future energy demand without importing energy. However, alternative policies on CO₂ emission constraints reduce the burden of imported fuel, improve energy security and reduce environmental impacts. The results show that the introduction of the CO₂ emission reduction targets and carbon taxes directly affect the shift of technologies from high carbon content fossil-based to low carbon content fossil-based and clean renewable energy-based technologies compared to the base scenario. With the cumulative CO₂ emission reduction target of 10–20% and carbon tax of 2500 Taka/ton, the cumulative net energy imports during 2005–2035 would be reduced in the range of 39–65% and 37%, respectively, compared to the base scenario emission level. The total primary energy requirement would be reduced in the range of 4.5–22.3% in the CO₂ emission reduction targets and carbon tax 2500 Taka/ton scenarios and the primary energy supply system would be diversified compared to the base scenario.     

Performance analysis of a solar photovoltaic operated domestic refrigerator

This paper describes the fabrication, experimentation and simulation stages of converting a 165 l domestic electric refrigerator to a solar powered one. A conventional domestic refrigerator was chosen for this purpose and was redesigned by adding battery bank, inverter and transformer, and powered by solar photovoltaic (SPV) panels. Various performance tests were carried out to study the performance of the system. The coefficient of performance (COP) was observed to decrease with time from morning to afternoon and a maximum COP of 2.102 was observed at 7 AM. Simulations regarding economic feasibility of the system for the climatic conditions of Jaipur city (India) were also carried out using RETScreen 4. It was observed that the system can only be economically viable with carbon trading option taken into account, and an initial subsidy or a reduction in the component costs – mainly SPV panels and battery bank.     

Vocal-tract modeling: fractional elongation of segment lengths in a waveguide model with half-sample delays

Digital waveguide models are commonly used for simulating vocal-tract acoustics based on physiological data. In particular, waveguide models with half-sample delays are known to be well suited for speech production research. This paper presents enhancements to such a model, aimed at improved accuracy in mapping physiological vocal-tract data (shape and length of the airway) to waveguide parameters. The enhancements allow the length of the vocal tract to be continuously varied, thus enabling more realistic synthesis. This is achieved by smoothly varying the individual segment lengths of a piecewise-cylindrical representation of the airway, without altering the system sampling frequency. Fractional-delay filters are used for spatial interpolation of the digital waveguide model. The algorithms are validated by modeling the protrusion of lips, lowering of larynx and lengthening of intermediate segments for a static vowel shape.     

Extended tuning range in sampled grating DBR lasers

The authors demonstrate, for the first time, successful implementation of a distributed Bragg reflector laser with two sampled grating mirrors, which they previously predicted should give tuning range in excess of 50 nm. This device uses a uniform grating pitch throughout the structure, and relies on the same fabrication technology as a standard DBR laser. Initial results show 57 nm of mathematical tuning at 1.475 μm with side-mode suppression ratio (SMSR)>30 dB over much of the tuning range. The observed change in operating wavelength versus mirror currents along with below threshold spectra agree with theoretical expectations