Burner Performance Evaluation Using Test Code

Development of new burner technology is common practice nowadays. Standardized test codes are available to conduct tests to determine operating characteristics and thermal performance of different parts of steam generating units. This paper describes the results of testing performed to evaluate thermal efficiency of a 74.5?kW fire-tube steam generator fired with a new premixed flame burner in comparison to a typical standard-retrofit diffusion flame burner system. Two premixed flame burners sized at 7.6 and 10.1?cm were tested. Testing was performed in accordance with the ASME PTC 4.1 Power Test Code. The evaluation was conducted in the range of small- to mid-sized, natural gas-fired applications, from 1.06?to?2.64×106?kJ/h. The environmental nitrogen oxide (NOx) emissions performance was also compared for both burner technologies. The results of this evaluation indicate that firing the test boiler with the 7.6?cm new burner slightly improves unit thermal efficiency by 4.0–3.3% for a unit load ranging from approximately 1.06?to?1.79×106?kJ/h, respectively. Operation with the 10.1?cm new burner improves the thermal efficiency by approximately 1.6% at 2.32×106?kJ/h. The uncertainty in the measurements used in the efficiency calculations should account for approximately ±1.5% uncertainty in the reported gross efficiency. Reductions in NOx emissions of the order of 10% resulted from operation with the new premixed flame burners.     

Extension of a combined analytical/numerical initial value problem solver for turbulent mixing with combustion

Here, we describe the development of a reacting flow multi-species/combustion methodology, implemented as an extension to the differential reduced ejector analysis (DREA) computer program [Mathematical and computer modeling, vol. 31, 2000, p. 21; Appl. Math. Model. 25 (2001) 427; Comput. Math. Appl. 43(10–11); NASA Contractor Report, 1998]. Use of the single fluid IVP solver framework that was developed for the original DREA model has been directly coupled into the combustion formulation. With these modifications, the analysis has an elementary single step reaction Fuel+Oxidizer→Product combustion capability. Though approximate in nature, the simplicity and efficiency of the DREA formulation make it suitable for its original niche, namely design and preliminary design environments where more complex and expensive models may be inappropriate.     

A result on the hyperstability of a class of hybrid dynamic systems

This paper presents a hyperstability theorem for a class of hybrid dynamic systems composed of coupled differential and difference equations subject to (possibly) time-varying nonlinearities satisfying a Popov-type inequality. The nonlinear controller generates the plant input at all times from its sampled values by defining an extended discrete system. The hyperstability results are obtained from this discrete system of special type whose state consists of the sampled continuous substate and the digital substate of the given hybrid system. Some corollaries and related physical interpretations are also given     

Acetohydroxy acid synthase and threonine deaminase activities, and the biosynthesis of isoleucine-leucine-valine in Streptococcus bovis

Acetohydroxy acid synthase (AHAS) and threonine deaminase (TD) activities were found in Streptococcus bovis and shown to be involved in the biosynthesis of the branched chain amino acids isoleucine, leucine and valine. Apparent lack of repression of AHAS synthesis by the end-products and reduced sensitivity of S. bovis growth to analogues of the branched chain amino acids suggested that secretion of isoleucine, leucine and valine in the growth medium may be a consequence of the regulatory features of AHAS. A glycyl-leucine-resistant mutant with reduced TD activity secreted a reduced amount of isoleucine and an increased amount of valine, which might be a result of the reduced rate of synthesis of the isoleucine precursor alpha-ketobutyrate and of a consequent preferential carbon flow through the valine branch of the pathway.     

De novo epileptic confusional status in a patient with cobalamin deficiency

A 80-year-old man with cobalamin deficiency and no history of epilepsy developed a partial complex epileptic confusional status (ECS) unresponsive to acute i.v. diazepam. Brain CT scan and MRI investigation ruled out a focal cerebral lesion. Therapy with high doses (10,000 micrograms i.m. daily) of cobalamin alone was started, and the patient fully recovered in the following 72-hour. Control EEGs repeatedly performed days and weeks later showed progressive disappearance of the frontal interictal spiking, while the patient was on monotherapy with cobalamin (5,000 micrograms i.m. weekly). A month later the patient unfortunately discontinued replacement therapy and 13 weeks later he developed a fatal convulsive epileptic status. To our knowledge the association of ECS and cobalamin deficiency has not been previously reported.     

Novel diterpenoid diacylglycerols from marine molluscs: potent morphogens and protein kinase C activators

Five novel 1,2-sn-diacylglycerols with diterpenoid acyl moieties in the sn-1 position were isolated and characterized, together with the corresponding 1,3-sn-diacylglycerols, from three species of dorid nudibranchs molluscs. Their potent activity as morphogens in vivo in the Hydra tentacle regeneration assay and their parallel activity as activators of rat brain protein kinase C (PKC) in vitro are reported here. Our findings promote the use of these compounds as useful molecular probes for both in vivo and in vitro studies on the participation of PKC in cell development.     

Room temperature characterization of Hg1-xCdxTe P-on-n heterostructure photodiodes

Measurements of 77K R_oA and 300K reverse bias dynamic impedance (R_dA) products at one volt reverse bias has been carried out to assess the degree of correlation of this figure of merit. Planar P-on-n heterostructures were grown on near lattice-matched CdZnTe substrates with Hg_1-xCd_xTe (0.20< x <0.30) by molecular beam epitaxy. These devices were passivated with CdTe and doped with indium and arsenic as n- and p-type dopants, respectively. Current-voltage characteristic of these devices exhibit thermally generated dark currents at small and modest reverse bias. We have observed that R_oA values of these long wavelength infrared P-on-n heterostructure photodiodes at 77K correlate with room temperature R_dA values. Diode arrays with high room temperature R_dA values at one volt reverse bias also have high R_oA values at 77K. Similarly, low R_dA values at room temperature indicate poor performance at 77K where deviation from diffusion current occurs at reverse bias of 0.2 to 1 volt at room temperature. The results presented here, for a small samples of devices, demonstrate that room temperature measurements of current-voltage characteristics to evaluate Hg_1-xCd_xTe (0.22< x <0.28) diode performance and array uniformity at lower temperatures can be used. This provides an acceptable criteria for further study at lower temperatures.     

Microfabricated Lamb wave device based on PZT sol-gel thin film formechanical transport of solid particles and liquids

The fabrication using silicon micromachining and characterization of an acoustic Lamb wave actuator is presented. The intended use of the device is for mass transport and sensor applications. The device consists of dual interdigitated transducers patterned on a thin-film composite membrane of silicon nitride, platinum, and a sol-gel-derived piezoelectric ceramic (PZT) thin film. The acoustic properties of the device are presented along with preliminary applications to mechanical transport and liquid delivery systems. Improved acoustic signals and improved mass transport are achieved with PZT over present Lamb wave devices utilizing ZnO or AlN as the piezoelectric transducer     

Electrophysiological properties and cholinergic responses of rat ventral oral pontine reticular neurons in vitro

This study analyses the relationship between the use of rotating instruments, the production of a smear layer and the presence of alterations to enamel microstructures. The rotating instruments used were carbide (8-12 blade) and diamond tipped (30-15 m) cutters. Cavities were made in extracted teeth. Subsequently, half the sample was analysed using the rugosimeter before and after the application of ortophosphoric acid at 35% for 15 and the other half suing a Scansion Electronic microscope (SEM). The results obtained showed on the one hand that carbide cutters leave a smoother surfacer than diamond tipped cutters, and on the other that the smear layer is eliminated better by carbide cutters compared to diamond tipped cutters. Moreover, there are no major traumatic-type alterations at the level of the enamel affecting the microstructure after the use of carbide cutters.     

Analysis of Combined Systems of Two Endoreversible Engines

A single endoreversible engine can operate as a cooler, a true heat engine, a heat pump, or a refrigerator. We investigate how many different modes of operation a combined system of two endoreversible engines may display. Special attention is paid to the independent combined system which neither consumes nor supplies power.