Thermal properties of pressureless melt infiltrated AlN–Si–Al composites

Thermal properties of AlN-Si-Al composites produced by pressureless melt infiltration of Al/Al alloys into porous α-Si₃N₄ preforms were investigated in a temperature range of 50-300 °C. SEM and TEM investigations revealed that the grain size of AlN particles was less than 1 μm. In spite of sub-micron grain size, composites showed relatively high thermal conductivity (TC), 55-107 W/(m.K). The thermal expansion coefficient (CTE) of the composite produced with commercial Al source, which has the highest TC of 107 W/(m.K), was 6.5×10^?6 K^?1. Despite the high CTE of Al (23.6×10^?6 K^?1), composites revealed significantly low CTE through the formation of Si and AlN phases during the infiltration process.     

Effect of protein-energy malnutrition on erythropoietin requirement in maintenance hemodialysis patients

Possible interactions between inflammatory and nutritional markers and their impact on recombinant human erythropoietin (rHuEPO) hyporesponsiveness are not well understood. We investigated the role of nutritional status in rHuEPO requirement in maintenance hemodialysis (MHD) patients without evidence of inflammation. This cross-sectional study included 88 MHD patients. The associations between required rHuEPO dose and malnutrition-inflammation score (MIS) and several laboratory values known to be related to nutrition and/or inflammation were analyzed. Anthropometric measures including body mass index, triceps skinfold thickness, and midarm circumferences were also measured. Twenty-three patients with serum C-reactive protein levels >10 mg/L were excluded from the analysis. The remaining 65 patients (male/female, 41/24; age 49.1+/-11.4 years; dialysis duration 99.7+/-63.0 months) were studied. These patients had moderate malnutrition and the average MIS was 7.4 (range 3-17). The average weekly dose of administered rHuEPO was 69.1+/-63.1 U/kg. Malnutrition-inflammation score had a positive correlation with the serum concentration of tumor necrosis factor-alpha, whereas it had a negative correlation with anthropometric measures, total iron-binding capacity, prealbumin, phosphorus, creatinine, and triglyceride. According to Pearson's correlation analysis, significant relationships of increased MIS with increased required rHuEPO dose and rHuEPO responsiveness index (EPO divided by hematocrit) were observed (p=0.008, r=-0.326; p=0.017, r=-0.306, respectively). Recombinant human erythropoietin dose requirement is correlated with MIS and adverse nutritional status in MHD patients without evidence of inflammation. Further research should focus on reversing the undergoing microinflammation for a better outcome in dialysis patients.     

Hemodialysis does not impair ventricular functions over 2 years

We aimed to evaluate the long-term effect of hemodialysis (HD) treatment on left and right ventricular (LV and RV) functions in patients with end-stage renal disease. The study population consisted of 22 patients with newly diagnosed end-stage renal disease. Before an arteriovenous fistula was surgically created for HD, the patients were evaluated by echocardiography for systolic and diastolic functions. After the first HD session (mean 24.22 ± 2.14 months), the second echocardiographic evaluations were performed. Left ventricular and RV functions before and after long-term HD treatment were compared. The mean age was 55 ± 13 years and 10 (45%) of the patients were female. After long-term HD treatment, the isovolumic relaxation time was significantly decreased; however, the peak early (E) and late (A) diastolic mitral inflow velocities, E/A ratio, and deceleration time of E wave were not significantly different from the baseline measurements. Also, there was no significantly change in the early diastolic velocity (Ea) of the lateral mitral anulus and the E/Ea ratio. Pulmonary vein peak diastolic velocity, peak atrial reversal velocity, and peak atrial reversal velocity duration remained almost unchanged even though the pulmonary vein peak systolic velocity and the pulmonary vein peak systolic velocity/pulmonary vein peak diastolic velocity ratio were significantly lower after long-term HD treatment. In addition, LV systolic functions, LV diameters, LV mass index, left atrium size, and RV diastolic functions were not statistically different after long-term HD treatment. The myocardium is exposed to hemodynamic, metabolic, and neuro-humoral abnormalities during HD treatment; however, the long-term effects of HD on ventricular functions are not clearly known. The present study showed that the long-term effects of HD on LV and RV functions were insignificant in patients with end-stage renal disease. We have demonstrated that the LV and RV functions did not change significantly after long-term HD treatment. We suggest that this result may be due to regulated blood pressure levels of the patients, treatment of anemia and other metabolic disorders during the HD period and the prevention of weight gain and hypervolemia.     

Polymeric nanopore membranes for hydrophobicity-based separations by conformal initiated chemical vapor deposition

High-aspect ratio hydrophobic, cylindrical nanopores having diameters as low as 5 nm are rapidly fabricated using conformal vapor deposition of fluorinated polymeric layers into porous track-etched polycarbonate membranes. The resultant selectivity of these membranes for pairs of small molecules of similar size, but of different hydrophobicity, arises from solute-pore wall interactions emphasized by confinement. Increasing selectivity was observed as pore diameter decreased and as the surface of the pore became more hydrophobic. Cylindrical pores provided higher selectivity than bottleneck-shaped pores having the same minimum diameter. A maximum selectivity of 234 was achieved between mesitylene and phloroglucinol by the best performing membrane. Membranes with small fluorinated pores exhibited an effective cutoff based on the polar surface area of the molecules, with limited correlation with solute size. This technology could lead to a new generation of membrane separations based on specific interactions.     

Electric field-induced strain behavior in lithium- and copper-added potassium sodium niobate piezoceramics and 1-3 piezocomposites

Potassium sodium niobate (KNN)-based leadfree materials were prepared and their field-induced strain behaviors were investigated. Ceramic lead-free piezoelectric materials were prepared in bulk and fiber forms with 1 mol% CuO-added potassium sodium niobate K0.5Na0.5NbO3 and x = 7 mol% lithium-modified (K(0.5-x/2)Na(0.5-x/2)Li(x))NbO(3) compositions. Fibers were drawn using a novel alginate gelation technique. Piezocomposites were prepared from these fibers with 1-3 connectivity and an epoxy matrix. A fully recoverable electrostrain of up to approximately 0.11% was observed in the CuO-added sample, whereas the Li-modified sample yielded up to 0.10% at 50 kV/cm electric field. A strain value of up to approximately 0.03% at 50 kV/cm electric field was obtained for piezocomposites prepared from lithium-modified fibers. The high-field converse piezoelectric coefficient was calculated from the strain-electric field (x-E) graph for all samples. Strain characteristics of the bulk and piezocomposite samples were analyzed based on the variation of strain with respect to square of the polarization (x-P2) to determine the electrostrictive contribution to the strain.     

Plasticized and unplasticized PLA/organoclay nanocomposites: Short‐ and long‐term thermal properties,morphology, and nonisothermal crystallization behavior

The short‐ and long‐term thermal properties, organoclay dispersion state, and the nonisothermal crystallization kinetics of organoclay based nanocomposites of poly(lactic acid) (PLA) and poly(ethylene glycol) (PEG) plasticized PLA were investigated. Differential scanning calorimetry analyses showed that plasticization of PLA/PEG blend was diminished due to physical aging by the time. The change in thermal properties such as glass transition temperature, cold crystallization temperature, and melting temperature was monitored. It was revealed from X‐ray diffraction analyses that in long term, the exfoliated and/or intercalated organoclay structure of nanocomposites observed in short term (just after processing) was differentiated to a tactoidal form (i.e., nonseparated clays). The nonisothermal crystallization behavior and kinetics were examined by using Avrami, Ozawa, and combined Avrami–Ozawa models. Moreover, the nucleating effect of clays was investigated in terms of Gutzow and Dobrewa approaches. It was found out that clays did not act as nucleating agents in plasticized PLA nanocomposites, which was also in good agreement with activation energy values obtained from Kissinger and Takhor models. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Subcellular localization and activity of gambogic acid

The natural product gambogic acid (GA) has shown significant potential as an anticancer agent as it is able to induce apoptosis in multiple tumor cell lines, including multidrug-resistant cell lines, as well as displaying antitumor activity in animal models. Despite the fact that GA has entered phase I clinical trials, the primary cellular target and mode of action of this compound remain unclear, although many proteins have been shown to be affected by it. By thorough analysis of several cellular organelles, at both the morphological and functional levels, we demonstrate that the primary effect of GA is at the mitochondria. We found that GA induces mitochondrial damage within minutes of incubation at low-micromolar concentrations. Moreover, a fluorescent derivative of GA was able to localize specifically to the mitochondria and was displaced from these organelles after competition with unlabeled GA. These findings indicate that GA directly targets the mitochondria to induce the intrinsic pathway of apoptosis, and thus represents a new member of the mitocans.     

Effects of an intense,high-frequency laser field on bound states in Ga1 ? xInxNyAs1 ? y/GaAs double quantum well

Within the envelope function approach and the effective-mass approximation, we have investigated theoretically the effect of an intense, high-frequency laser field on the bound states in a Ga_xIn_{1 − x}N_yAs_{1 − y}/GaAs double quantum well for different nitrogen and indium mole concentrations. The laser-dressed potential, bound states, and squared wave functions related to these bound states in Ga_{1 − x}In_xN_yAs_{1 − y}/GaAs double quantum well are investigated as a function of the position and laser-dressing parameter. Our numerical results show that both intense laser field and nitrogen (indium) incorporation into the GaInNAs have strong influences on carrier localization.     

Effect of transverse shear strains on plates resting on elastic foundation using modified Vlasov model

A four-noded quadrilateral (PBQ4) and an eight-noded quadrilateral (PBQ8) plate bending element based on Mindlin plate theory are adopted for the analysis of thin and thick plates resting on elastic foundation using modified Vlasov model. The terms of vertical deflection stiffness matrix and shear deformation stiffness matrix of the subsoil are evaluated using finite element method, and presented in explicit forms. Selective reduced integration technique is used in addition to full integration technique for both the types of the elements to avoid shear-locking problem that occurs under the thin plate limit. It has been demonstrated that the performance of the eight-noded quadrilateral element is excellent for thin and thick plates on elastic foundation when selective-reduced integration technique is used. General conclusion can be drawn from the results that the effect of the shear strain on the behavior of the plate resting on subsoil is always quite small for free plates compare to the supported ones.     

Coprecipitation of Ni(2+), Cd(2+) and Pb(2+) for preconcentration in environmental samples prior to flame atomic absorption spectrometric determinations

A coprecipitation procedure has been presented prior to flame atomic absorption spectrometric determination of nickel, cadmium and lead ions in environmental samples. Analyte ions were coprecipitated by using copper hydroxide precipitate. The influences of some analytical parameters like amounts of copper, sample volume, etc., on the recoveries of the analytes were investigated. The interference of other ions was negligible. Under the optimized conditions, the detection limits (3 sigma, n=15) of lead(II), nickel(II) and cadmium(II) were 7.0, 3.0 and 2.0 microg/L, respectively. The proposed method has been successfully applied for the determination of traces of Ni, Cd and Pb in environmental samples like tap water.