Reduced order modeling & controller design for mass transfer in a grain storage system

This paper considers the problem of simulating the humidity distributions of a grain storage system. The distributions are described by partial differential equations (PDE). It is quite difficult to obtain the humidity profiles from the PDE model. Hence, a discretization method is applied to obtain an equivalent ordinary differential equation model. However, after applying the discretization technique, the cost of solving the system increases as the size increases to a few thousands. It may be noted that after discretization, the degree of freedom of the system remain the same while the order increases. The large dynamic model is reduced using a proper orthogonal decomposition based technique and an equivalent model but of much reduced size is obtained. A controller based on optimal control theory is designed to obtain an input such that the output humidity reaches a desired profile and also its stability is analyzed. Numerical results are presented to show the validity of the reduced model and possible further extensions are identified.     

Grafting vinyl monomers into nylon-6. II. Graft copolymerization of methyl methacrylate onto nylon-6 by hexavalent chromium ion

The feasibility of chromium(VI) to induce graft copolymerization of methyl methacrylate onto nylon-6 was investigated in the presence of nitrogen. The rate of grafting was determined by varying monomer concentration, chromium(VI) concentration, temperature, acidity of the medium, solvents, inorganic salts, and redox system. The graft yield increases significantly by increasing the monomer concentration. The graft yield increases with increase of [Cr(VI)] up to 0.025 mole/liter. With further increase of [Cr(VI)], the graft yield decreases. The increase of acid concentration up to 0.395 mole/liter results the increase in graft yield. Beyond this concentration the graft yield decreases. The graft yield increases with increase in temperature up to 55°C and thereafter it decreases. The graft yield is medium dependent. The graft yield increases with increasing thiourea concentration upto 0.0025 mole/liter but beyond this concentration, the percentage graft yield decreases. A suitable kinetic scheme has been proposed and the rate equation has been evaluated.     

Effect of flow rate and temperature on crystallization kinetics,crystallinity index,and elastic modulus of PEEK

Dynamic, in situ wide angle X-ray scattering (WAXS) studies of the melt crystallization of injection-molded poly(ether ether ketone) (PEEK) have been carried out using an X-ray diffractometer and a position-sensitive detector. A test cell has been fabricated to fit inside the diffractometer and yet work as a complete injection molding apparatus. The rate of crystallization has been shown to increase with decreasing crystallization temperature and/or increasing flow rate in the mold. The crystallization rate decreases dramatically with increase in melt soak time at 400°C. The crystallinity index, which affects the stiffness, toughness, and fracture behavior of PEEK, has been measured under various processing conditions, by wide angle X-ray scattering, so as to optimize the process parameters: molding time, mold temperature, melt temperature, soak time at melt temperature, and flow rate. It has been shown that the crystallinity and hence the elastic modulus increase with increase in crystallization temperature and/or flow rate. Chain orientation has been shown to be absent in the bulk of the injection-molded specimens under normal molding conditions.     

Production of agrochemical from waste polyesters

In this study, agrochemical was produced from waste polyesters. Reactions of waste polyesters [poly (ethylene terephthalate) (PET) and poly (butylene terephthalate) (PBT)] powder with ethylene glycol (EG) in the presence of tetrahydrofurane (THF) using 0.003 mol lead acetate as a catalyst were carried out in a batch reactor at 470 K and at atmospheric pressure conditions. Reactions were undertaken with various particle size ranges from 50 to 512.5 μm, and reaction time from 30 to 70 min for reactions of polyesters. Low molecular weight product of polyester was obtained during this process. In the next stage, hydroxylamine hydrochloride (HAHC), cyclohexylamine (CHA), and potasium hydroxide (KOH) solution were introduced to convert low molecular weight product of polyester into terephthalohydroxamic acid (TPHA) by introduction of HCl (Hydrochloric Acid) as per stoichiometric requirement. TPHA can be used as an agrochemical (insecticide) with appreciable efficiency. To increase the polyester conversion rate, external catalyst (0.003 mol lead acetate) was introduced during the reaction. The product was deposited on the surface of unreacted polyester, which was removed from the surface by introducing dimethyl sulfoxide (DMSO). To accelerate the reaction rate, DMSO, CHA, and THF were introduced during the reaction, which has an industrial significance. Depolymerization of polyester was proportional to the reaction time. Depolymerization of polyester was inversely proportional to the particle size of polyester. Analyses of value‐added product (TPHA) and byproducts [EG and BD (1,4‐butanediol)] as well as polyesters were undertaken. A kinetic model is developed, and experimental data simulated with it, which was consistent with the model. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2504–2510, 2006     

Dual polarized triple band hybrid MIMO cylindrical dielectric resonator antenna for LTE2500/WLAN/WiMAX applications

In this communication, triple band hybrid multi‐input–multi‐output (MIMO) cylindrical dielectric resonator antenna (CDRA) with high isolation is examined. The proposed MIMO antenna includes two symmetric folded microstrip line feeding structures along with CDRA at two different ends of substrate. Two inverted L‐shaped strips on the ground plane are used to enhance the isolation (S₁₂ < ?15 dB) as well as to generates 2.7 GHz frequency band. Metallic strip on the ground plane act as an electromagnetic reflector and also enhance the isolation between two antennas (S₁₂ < ?20 dB). Archetype of proposed MIMO antenna design has been fabricated and tested to validate the simulated results. The proposed antenna operates at three different frequency bands 2.24–2.38 GHz, 2.5–3.26 GHz, and 4.88–7.0 GHz (S₁₁ < ?6 dB) with the fractional bandwidth 6.06%, 26.4%, and 35.7%, respectively. Folded microstrip lines generate path delay between the electric field lines and originate circular polarization characteristics in the frequency range 5.55–5.75 GHz with the fractional bandwidth of 3.55%. In order to satisfy the different performance requirement of MIMO antenna such as envelop correlation coefficient, mean effective gain, effective diversity gain, peak gain are also examined. The proposed antenna is found suitable for LTE2500, WLAN, and WiMAX applications. © 2016 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2016.     

Design of a password-based authenticated key exchange protocol for SIP

The Session Initiation Protocol (SIP) is a signaling communications protocol, which has been chosen for controlling multimedia communication in 3G mobile networks. In recent years, password-based authenticated key exchange protocols are designed to provide strong authentication for SIP. In this paper, we address this problem in two-party setting where the user and server try to authenticate each other, and establish a session key using a shared password. We aim to propose a secure and anonymous authenticated key exchange protocol, which can achieve security and privacy goal without increasing computation and communication overhead. Through the analysis, we show that the proposed protocol is secure, and has computational and computational overheads comparable to related authentication protocols for SIP using elliptic curve cryptography. The proposed protocol is also provably secure in the random oracle model.     

Design and performance of a punch mechanism based pellet injector for alternative injection in the large helical device

A low speed single barrel pellet injector, using a mechanical punch device has been developed for alternative injection in the large helical device. A pellet is injected by the combined operation of a mechanical punch and a pneumatic propellant system. The pellet shape is cylindrical, 3 mm in diameter and 3 mm in length. Using this technique the speed of the pellet can be controlled flexibly in the range of 100-450 m/s, and a higher speed can be feasible for a higher gas pressure. The injector is equipped with a guide tube selector to direct the pellet to different injection locations. Pellets are exposed to several curved parts with the curvature radii R(c) = 0.8 and 0.3 m when they are transferred in guided tubes to the respective injection locations. Pellet speed variation with pressure at different pellet formation temperatures has been observed. Pellet intactness tests through these guide tubes show a variation in the intact speed limit over a range of pellet formation temperatures from 6.5 to 9.8 K. Pellet speed reduction of less than 6% has been observed after the pellet moves through the curved guide tubes.     

Bipartite coherent-state quantum key distribution with strong reference pulse

We propose an optical scheme for quantum key distribution in which bits are encoded in relative phases of four bipartite weak coherent states ${|\alpha, \alpha\rangle, |-\alpha, -\alpha\rangle, |-\alpha, \alpha\rangle}$ and ${|\alpha, -\alpha \rangle}$ , with respect to a strong reference pulse. We discuss security of the scheme against eavesdropping strategies like, photon number splitting, photon beam splitting and intercept-resend attacks. It is found that present scheme is more sensitive against these eavesdropping strategies than the two-dimensional non-orthogonal state based protocol and BB84 protocol. Our scheme is very simple, requires only passive optical elements like beam splitters, phase shifters and photon detectors, hence is at the reach of presently available technology.     

Simultaneous nonrigid registration of multiple point sets and atlas construction

Group-wise registration of a set of shapes represented by unlabeled point-sets is a challenging problem since, usually this involves solving for point correspondence in a nonrigid motion setting. In this paper, we propose a novel and robust algorithm that is capable of simultaneously computing the mean shape represented by a probability density function from multiple unlabeled point-sets and registering them non-rigidly to this emerging mean shape. This algorithm avoids the correspondence problem by minimizing the Jensen-Shannon (JS) divergence between the point sets. We motivate the use of the JS divergence by pointing out its close relationship to hypothesis testing. We derive the analytic gradient of the cost function in order to efficiently achieve the optimal solution. JS-divergence is symmetric with no bias toward any of the given shapes to be registered and whose mean is being sought. A by product of the registration process is a probabilistic atlas defined as the convex combination of the probability densities of the input point sets being aligned. Our algorithm can be especially useful for creating atlases of various shapes present in images as well as for simultaneously (rigidly or non-rigidly) registering 3D range data sets without having to establish any correspondence. We present experimental results on real and synthetic data.     

Inclusion dynamics hybrid automata

Hybrid systems are dynamical systems with the ability to describe mixed discrete-continuous evolution of a wide range of systems. Consequently, at first glance, hybrid systems appear powerful but recalcitrant, neither yielding to analysis and reasoning through a purely continuous-time modeling as with systems of differential equations, nor open to inferential processes commonly used for discrete state-transition systems such as finite state automata. A convenient and popular model, called hybrid automata, was introduced to model them and has spurred much interest on its tractability as a tool for inference and model checking in a general setting. Intuitively, a hybrid automaton is simply a “finite-state” automaton with each state augmented by continuous variables, which evolve according to a set of well-defined continuous laws, each specified separately for each state. This article investigates both the notion of hybrid automaton and the model checking problem over such a structure. In particular, it relates first-order theories and analysis results on multivalued maps and reduces the bounded reachability problem for hybrid automata whose continuous laws are expressed by inclusions (x′f(x,t)) to a decidability problem for first-order formulæ over the reals. Furthermore, the paper introduces a class of hybrid automata for which the reachability problem can be decided and shows that the problem of deciding whether a hybrid automaton belongs to this class can be again decided using first-order formulæ over the reals. Despite the fact that the bisimulation quotient for this class of hybrid automata can be infinite, we show that our techniques permit effective model checking for a nontrivial fragment of CTL.