Measurement of active shoulder proprioception: dedicated system and device

Proprioception is an essential part of shoulder stability and neuromuscular control. The purpose of the study was the development of a precise system of shoulder proprioception assessment in the active mode (Propriometr). For that purpose, devices such as the electronic goniometer and computer software had been designed. A pilot study was carried out on a control group of 27 healthy subjects, the average age being 23.8 (22–29) in order to test the system. The result of the assessment was the finding of the error of active reproduction of the joint position (EARJP). EARJP was assessed for flexion, abduction, external and internal rotation. For every motion, reference positions were used at three different angles. The results showed EARJP to range in 3–6.1°. The proprioception evaluation system (propriometr) allows a precise measurement of active joint position sense. The designed system can be used to assess proprioception in both shoulder injuries and treatment. In addition, all achieved results of normal shoulders may serve as reference to be compared with the results of forthcoming studies.     

Characterization of the anticonvulsant profile of isonicotinic acid benzylamide in various experimental seizure models in mice

This study focused on the evaluation of anticonvulsant properties of isonicotinic acid benzylamide (iso-Nic-BZA) in numerous experimental seizure models (maximal electroshock [MES]-, bicuculline [BIC]-, pentylenetetrazole [PTZ]-, pilocarpine [PILO]-, alpha-amino-3-hydroxy-5-methyl-4-isoxazolepropionic acid [AMPA]-, kainic acid [KA]- and N-methyl-d-aspartic acid [NMDA]-induced seizures). Moreover, acute adverse-effect profile of the agent with respect to impairment of motor coordination was assessed in animals subjected to the chimney test. The evaluation of time-course and dose-response relationships for iso-Nic-BZA provided evidence that the compound produced the peak to maximum antielectroshock action and acute adverse effects at 5min after its systemic (i.p.) administration. Iso-Nic-BZA exerted a clear-cut anticonvulsant action against maximal electroshock-induced seizures in mice and its ED(50) value was 70.6 (56.4-88.4)mg/kg. The assessment of acute adverse effects in the chimney test revealed that the agent produced acute neurotoxic effects and its TD(50) value was 135.6 (108.8-169.0)mg/kg. Additionally, iso-Nic-BZA showed the anticonvulsant activity in numerous chemically-induced seizures (AMPA-, BIC-, KA-, and PTZ-evoked clonic convulsions), remaining virtually ineffective (at doses up to 200mg/kg) in PILO- and NMDA-induced seizures in mice. Based on this study, one can conclude that iso-Nic-BZA due to the short time to peak of its maximum anticonvulsant effects (5min after its i.p. administration), deserves more attention as a potential antiepileptic drug for patients in status epilepticus.     

QT Interval prolongation and torsades de pointes due to a coadministration of ciprofloxacin and azimilide in a patient with implantable cardioverter-defibrillator

The presented case report describes a male patient with an implanted cardioverter-defibrillator (ICD) in whom a coadministration of ciprofloxacin and azimilide caused QT interval prolongation and multiple episodes of torsades de pointes (TdP) followed by ICD shocks (arrhythmic storm). The case highlights a not described drug interaction between azimilide and ciprofloxacin, which is believed to be the safest member of fluoroquinolones class.     

Ischemic tau protein gene induction as an additional key factor driving development of Alzheimer’s phenotype changes in CA1 area of hippocampus in an ischemic model of Alzheimer’s disease

Background

Tauopathies are a class of neurodegenerative illnesses associated with the aberrant accumulation of the tau protein in the brain. The best known out of these diseases is Alzheimer’s disease, a disorder where the microtubule associated tau protein becomes hyperphosphorylated (which lowers its binding affinity to microtubules) and accumulates inside neurons in the form of tangles. In this study, we attempt to find out whether brain ischemia may play an important role in tau protein gene alterations.

Effects of second-generation antipsychotics on selected markers of one-carbon metabolism and metabolic syndrome components in first-episode schizophrenia patients

Purpose

Alterations in one-carbon metabolism (OCM) have been repeatedly reported in schizophrenia. However, there is a scarcity of studies addressing the effects of antipsychotics on selected OCM markers in schizophrenia and provided results are inconsistent.

Methods

We recruited 39 first-episode schizophrenia (FES) patients and determined serum profile of total homocysteine (tHcy), folate, vitamin B12, lipoproteins and glucose at baseline and after 12 weeks of treatment with second-generation antipsychotics (SGA) including olanzapine and risperidone in monotherapy.

Results

After 12 weeks of treatment, all patients had significantly higher body mass index (BMI), serum levels of total cholesterol (TC), low-density lipoproteins (LDL), triglycerides (TG) and tHcy together with significantly lower levels of folate and vitamin B12. The analysis of differences between SGA revealed the same biochemical alterations in patients treated with olanzapine as in the whole group, while those receiving risperidone had no statistically significant changes in serum folate, vitamin B12 and TG. There was a significantly higher increase in BMI and TC in patients treated with olanzapine in comparison with those treated with risperidone. Patients receiving olanzapine had a higher decrease in vitamin B12 than those assigned to the treatment with risperidone. Changes in folate, vitamin B12, tHcy and TC levels were significant only in males, even after Bonferroni correction. Multiple regression analysis revealed that changes in tHcy levels are associated with gender and baseline metabolic parameters (BMI, glucose, TC, LDL and HDL) but not with selected SGA.

Conclusions

These results indicate that SGA may influence OCM, especially in first-episode schizophrenia (FES) males.     

Strength Properties of Structural Glulam Elements from Pine (Pinus sylvestris L.) Timber Reinforced in the Tensile Zone with Steel and Basalt Rods

The study analyzed potential applicability for asymmetric reinforcement of glulam beams using materials with a higher modulus of elasticity. Reinforcement elements included smooth and ribbed steel rods as well as basalt rods. These rods were placed only in the tensile zone, assuming that they will not only impart increased rigidity but first of all will reduce the scatter of bending strength values. What is significant, tests were conducted on timber with defects, as it is most commonly used in industrial practice. Analyses showed that this provides an increase in rigidity close to the assumed level. A significant increase in strength was observed. The manufactured beams reinforced with steel and basalt rods were characterized by mean bending strength amounting to 54 and 47 N/mm², respectively. However, no significant improvement was found in the scatter of the observed variable. Beams reinforced with steel exhibit a 20% higher strength than unreinforced beams. The lower strength of beams reinforced with basalt bars may be related to the lower modulus of elasticity of the basalt itself.     

Thermal,Spectroscopy and Luminescent Characterization of Hybrid PMMA/Lanthanide Complex Materials

Novel hybrid materials based on the poly(methyl methacrylate) (PMMA) matrix and lanthanide(III) carboxylates Eu:2,6-DClB and Tb:2,6-DClB were synthesized and carefully analyzed in the context of their potential application in optically active polymer-based optical fibers. To determine the usefulness of the obtained materials, a careful thermal, mass spectroscopy, and optical characterization was performed, focusing on the features critical for the technology of optical fiber processing. In addition, the luminescent features of both lanthanide complexes and the resulting hybrid composites were carefully investigated to identify the processes responsible for light emission and to analyze the influence of the PMMA host on light emission intensity and spectral characteristics. The obtained results showed that both lanthanide carboxylate complexes exhibited intense luminescence in the red and green spectral range, typical of europium and terbium dopants, and that those features were well preserved after introducing them into the PMMA polymer. Thermal analysis also proved that introducing the luminescent additives did not significantly affect the thermal properties of both hybrid materials, thus enabling further processing into the form of optical fibers.     

Bone Density Micro-CT Assessment during Embedding of the Innovative Multi-Spiked Connecting Scaffold in Periarticular Bone to Elaborate a Validated Numerical Model for Designing Biomimetic Fixation of Resurfacing Endoprostheses

Our team has been working for some time on designing a new kind of biomimetic fixation of resurfacing endoprostheses, in which the innovative multi-spiked connecting scaffold (MSC-Scaffold) that mimics the natural interface between articular cartilage and periarticular trabecular bone in human joints is the crucial element. This work aimed to develop a numerical model enabling the design of the considered joint replacement implant that would reflect the mechanics of interacting biomaterials. Thus, quantitative micro-CT analysis of density distribution in bone material during the embedding of MSC-Scaffold in periarticular bone was applied. The performed numerical studies and corresponding mechanical tests revealed, under the embedded MSC-Scaffold, the bone material densification affecting its mechanical properties. On the basis of these findings, the built numerical model was modified by applying a simulated insert of densified bone material. This modification led to a strong correlation between the re-simulation and experimental results (FVU = 0.02). The biomimetism of the MSC-Scaffold prototype that provided physiological load transfer from implant to bone was confirmed based on the Huber–von Mises–Hencky (HMH) stress maps obtained with the validated finite element (FE) model of the problem. The micro-CT bone density assessment performed during the embedding of the MSC-Scaffold prototype in periarticular bone provides insight into the mechanical behaviour of the investigated implant-bone system and validates the numerical model that can be used for the design of material and geometric features of a new kind of resurfacing endoprostheses fixation.