An investigation on the comparison of wet spinning and electrospinning: Experimentation and simulation

Polysulfonamide (PSA) has been widely used in many fields because of its excellent thermodynamic properties. In this study, PSA fibers were prepared separately via two different spinning ways, including conventional wet spinning and electrospinning. Fluid motion of wet spinning and electrostatic field of electrospinning were modeled using finite element analysis to investigate the spinning process. The properties of fabricated PSA fibers were characterized systematically by scanning electron microscope (SEM), fourier transform infrared spectrometer (FTIR), X-ray diffraction (XRD), thermal gravity analysis (TGA) and electronic strength tester. Based on the simulation and theoretical analysis of spinning process, it was found that the extruding force of the wet spinning is larger than that of the electrospinning. The larger extruding force makes the alignment of macromolecules inside fiber relatively uniform, and a higher proportion of crystallization happens. Accordingly, the mechanical properties and thermal stability of PSA fibers could be improved due to a higher proportion of crystallization. The experimental results of mechanical strength and TG test are coincided with the simulation results. PSA fiber prepared by wet spinning has better thermal stability and mechanical properties than that fabricated by electrospinning.     

How Long can Rogued Potato Plants Left in the Field Be a Source of <Emphasis Type="Italic">Potato Virus Y</Emphasis> for Aphids?

Removal of diseased plants (roguing) is commonly practiced in seed potato production. Diseased plants left to desiccate in fields could possibly serve as sources of Potato virus Y (PVY). PVY acquisition by three aphid species (Myzus persicae, Rhopalosiphum padi, Aphis fabae) was evaluated with leaflets from rogued plants for seven days. Results showed greater PVY acquisition rates in non-colonizing aphids species compared to colonizing ones. The proportion of aphids leaving leaflets increased with time (i.e. days after plants were uprooted) and some aphids were carrying PVY in their stylets on each of the seven days of the experiment, suggesting that aphids were able to probe and acquire PVY even when plants wilted. These results confirmed that diseased plants left in fields can serve as a source of PVY for aphids even after they wilted and emphasises that proper actions must be taken to efficiently remove diseased plants from fields.     

Effectiveness of Combined Use of Mineral Oil and Insecticide Spray in Reducing <Emphasis Type="Italic">Potato Virus Y</Emphasis> (PVY) Spread under Field Conditions in New Brunswick,Canada

In the 2014 and 2015 crop seasons, the efficacies of different types, rates and combinations of mineral oil and insecticide foliar sprays for reducing Potato virus Y (PVY) spread were tested in controlled field trials in New Brunswick (NB), Canada. Experimental plots were planted with certified PVY-free Goldrush, supplemented with known virus-infected seed to raise PVY inoculum to 2.3% and 3% at the beginning of the 2014 and 2015 seasons, respectively. Treatments consisted of mineral oil-only sprays at different application rates, insecticide-only sprays of differing numbers, and several combined mineral oil and insecticide spray regimes, all compared to a no-spray control treatment. PVY spread to 18% (2014) and 22% (2015) of initially virus-free plants in no-spray control plots, with significant reductions observed in PVY spread in several treatments. Greatest PVY reductions, as low as 4% (2014) and 12% (2015), were in combined mineral oil and insecticide spray treatments, followed by oil-only sprays; while insecticide-only sprays did not significantly reduce PVY spread. As well as measuring PVY spread to marked test plants and randomly collected post-harvest tuber sample from the plots, exhibited similar treatment pattern for PVY incidence. Multiple logistic regression modeling confirmed the relative efficacy of combined oil and insecticide sprays for reducing PVY spread, while accounting for variable inoculum and aphid factors. Modeling also highlighted the importance of planting low-PVY seed initially, and of early application of foliar sprays. Local best management practice recommendations for reduction of in-field PVY spread were discussed.     

Combination of On-Line Solid-Phase Extraction with LC-MS for the Determination of Potentially Hazardous Glycoalkaloids in Potato Products

A simple and rapid method for the determination of naturally occurring, potentially hazardous glycoalkaloids (GAs) in potatoes and their products has been developed. The procedure is based on the on-line solid-phase extraction of the acetic acid extracts from potato products and combined with liquid chromatography (LC)-mass spectrometry (MS) in a fully automated system (Symbiosis™, Spark Holland Instruments, Emmen, The Netherlands). As sorbent material HySphere™ 18HD was used for alkaloid enrichment. GAs were eluted with the LC gradient and directly analysed by MS. Detection of the analytes was achieved in the sensitive multiple reaction monitoring mode using two characteristic ions (m/z 98 as a qualifier for GAs and m/z 868.3 as a quantifier for α-solanine or m/z 852.4 for α-chaconine). Typical validation data for method precision (v _k α-solanine = 5.3–6.5, v _k α-chaconine = 3.4–15.4), accuracy (average recovery of α-solanine = 84%, average recovery of α-chaconine = 87%) and linearity over the range from 1 to 1,000 ng ml⁻¹ (R ² = 0.9915 for α-solanine, R ² = 0.9939 for α-chaconine) with detection limits of 0.3 ng ml⁻¹ for α-chaconine and 0.5 ng ml⁻¹ for α-solanine were obtained. GA contents of commercial potato products were determined by the new on-line method and afterwards compared with those obtained with an established high-performance LC routine procedure. Better performance of the on-line procedure was obvious from the standard deviations of both methods. Other advantages included a strong reduction of overall analysis time, human intervention and solvent consumption as well as waste production. The time required for the on-line analysis was 5 min, which would allow processing of almost 100 samples in 8 h.     

Allocating the costs of multi-purpose water resource development: a case study of Chi-Chi Weir in Taiwan

Most multi-purpose water resources have been planned and constructed by governments in Taiwan to meet the water demands of different users. However, economic and solvency differences among parties using water create conflicts regarding the reasonable and equitable allocation of investment and operational costs. The Chi-Chi Weir in Nantou County, which was completed in 2002, meets the high water demand of residents and the needs of industrial growth in central Taiwan. Thus, multi-purpose water reservoirs are designed to serve agriculture, the public and industry. Three analytical methods, the quantity-based method, marginal cost method, and separable cost remaining benefit method (SCRB), are employed to compare the cost allocation for different parties using water. The quantity-based method indicates that proportional costs allocated to agriculture, the public, industry and new irrigated areas are 88.02, 3.63, 7.86, and 0.49%, respectively. Via the marginal cost method, the proportional costs allocated to agriculture, the public, hydropower, industry and new irrigated areas are 68.44, 2.51, 28.71, and 0.34%, respectively. The marginal cost price of water is NT$ 2.97 ton⁻¹; industrial use has the highest price. Based on the SCRB method, the proportional costs allocated to agriculture, the public, hydropower, and new irrigated areas are 18.2, 22.2, 51.8, 4.8, and 2.9%, respectively.     

Gamma-linolenic Acid from Fifty-seven Ribes Species and Cultivars

Plant Foods for Human Nutrition - γ-linolenic acid (GLA, 18:3n-6) is a bioactive fatty acid (FA) that exerts several healthy actions; however, its occurrence is restricted to a few oils. The...     

Microalgae as Contributors to Produce Biopolymers

Biopolymers are very favorable materials produced by living organisms, with interesting properties such as biodegradability, renewability, and biocompatibility. Biopolymers have been recently considered to compete with fossil-based polymeric materials, which rase several environmental concerns. Biobased plastics are receiving growing interest for many applications including electronics, medical devices, food packaging, and energy. Biopolymers can be produced from biological sources such as plants, animals, agricultural wastes, and microbes. Studies suggest that microalgae and cyanobacteria are two of the promising sources of polyhydroxyalkanoates (PHAs), cellulose, carbohydrates (particularly starch), and proteins, as the major components of microalgae (and of certain cyanobacteria) for producing bioplastics. This review aims to summarize the potential of microalgal PHAs, polysaccharides, and proteins for bioplastic production. The findings of this review give insight into current knowledge and future direction in microalgal-based bioplastic production considering a circular economy approach. The current review is divided into three main topics, namely (i) the analysis of the main types and properties of bioplastic monomers, blends, and composites; (ii) the cultivation process to optimize the microalgae growth and accumulation of important biobased compounds to produce bioplastics; and (iii) a critical analysis of the future perspectives on the field.     

Variation in the Carotenoid Composition of the Lycopene-Rich Brazilian Fruit <Emphasis Type="Italic">Eugenia uniflora</Emphasis> L.

The indigenous pitanga (Eugenia uniflora L.) is now marketed and commercially processed in Brazil. In the present work, the carotenoids of the pitanga fruit from two states and at two stages of ripening, as well as of processed pitanga products (frozen pulp and juice, the brands being designated as A, B and C) commercialized in Campinas, São Paulo, were determined by HPLC. As compared to ripe pitanga from Medianeira, Paraná, those from Campinas had significantly higher (all-E)-lycopene (14.0 vs. 71.1 μg/g), (13Z)-lycopene (1.1 vs. 5.0 μg/g) and (all-E)-γ-carotene (1.6 vs. 3.8 μg/g) levels. Significant increases in most of the carotenoids occurred from the partially ripe to the ripe fruits, with (all-E)-lycopene doubling its concentration in fruits from both states. Pitanga was found to be one of the richest fruit sources of carotenoids, particularly lycopene, but the processed products had much lower lycopene content. The mean (all-E)-lycopene concentration was 16.6 μg/g for frozen pulp brand A, 23.0 μg/g for bottled juice brand B and 25.6 μg/g for bottled juice brand C. Optimization of processing is therefore needed to guarantee better retention of this important carotenoid.     

Effect of glycerol cross-linking and PDI on the shape memory effect and mechanical properties of polyurethane

A series of shape memory polyurethane (PU) copolymers synthesized from 1,4-phenyldiisocyanate (PDI), poly(tetramethyleneglycol) (PTMG), 1,4-butanediol (BD) as a chain extender, and glycerol as a cross-linking agent were tested for the mechanical properties and the shape memory effect at the temperature 20 °C above melting temperature (T _m), and were compared with other PUs synthesized from 4,4′-methylene-bis-phenyldiisocyanate (MDI), PTMG, and BD. Mechanical properties and shape memory effect were improved substantially by adopting both PDI and glycerol. Interestingly, enthalpy of melting and T _m were not affected by the glycerol content. Vibration and shock absorption ability was investigated by measuring both loss tan δ and storage modulus with dynamic mechanical analyzer (DMA).