Dauerhaftigkeit und mechanische Stabilität von Terrassendielen bei erhöhter Temperatur – Ein Werkstoffvergleich: WPC,thermisch modifiziertes Holz und Massivholz

This article deals with the differences in the long-term durability and thermal stability under load of terrace deckings from various materials. The tested materials were deckings made of wood, thermally modified timber (TMT), and wood–polymer–composites (WPC). For the determination of the test temperatures for component testing according to EN 310, the surface temperatures of the decks during a normal hot summer day were measured. A cyclic test according to EN 321 was applied to all decking materials. Afterwards the component testing was repeated. All wooden samples reveal considerable cracks, some were twisted, and few were even broken. In particular regarding the optical appearance, wood decks show advantages against the TMT decks. Some WPC decks show very fine cracks on the face, which were additionally analyzed by means of X-ray computed tomography (CT). Except for the WPC deck with higher wood content, no WPC deck revealed significant changes after the cyclic test. The CT analysis was also suitable to find cracks inside the materials and illustrate them. Thus, the whole damage inside a sample could be characterized by calculating a kind of error pattern. No considerable cracks or failures could be observed on the WPC decks.     

Forecasting hydrogen production potential in islamabad from solar energy using water electrolysis

The focus of this study is the use of Machine Learning methods to forecast Solar Hydrogen production potential for the Islamabad region of Pakistan. For this purpose, we chose a Photovoltaic-Electrolytic (PV-E) system to forecast electricity and, hence, hydrogen production. The weather data used for forecasting and simulation were recorded with precise meteorological instruments stationed in Islamabad, over the course of 13 and a half months. Out of the three tested algorithms, Prophet performs the best with Mean Absolute Percentage Error of 3.7%, forecasting a daily average Hydrogen production of 93.3 × 10³ kg/Km². Although, the forecast in this study is made for the month of August and September, during which the local season moves towards winter, this study demonstrates solar hydrogen production, as a green energy source, has a tremendous potential in this region.     

Improving object classification robustness in RGB-D using adaptive SVMs

Nowadays object recognition is a fundamental capability for an autonomous robot in interaction with the physical world. Taking advantage of new sensing technologies providing RGB-D data, the object recognition capabilities increase dramatically. Object recognition has been well studied, however, known object classifiers usually feature poor generality and, therefore, limited adaptivity to different application domains. Although some domain adaptation approaches have been presented for RGB data, little work has been done on understanding the effects of applying object classification algorithms using RGB-D for different domains. Addressing this problem, we propose and comprehensively investigate an approach for object recognition in RGB-D data that uses adaptive Support Vector Machines (aSVM) and, in this way, achieves an impressive robustness in cross-domain adaptivity. For evaluation, two datasets from different application domains were used. Moreover, a study of state-of-the-art RGB-D feature extraction techniques and object classification methods was performed to identify which combinations (object representation - classification algorithm) remain less affected in terms of performance while switching between different application domains.     

Effect of Varying Amount of Polyethylene Glycol (PEG-600) and 3-Aminopropyltriethoxysilane on the Properties of Chitosan based Reverse Osmosis Membranes

Chitosan and polyethylene glycol (PEG-600) membranes were synthesized and crosslinked with 3-aminopropyltriethoxysilane (APTES). The main purpose of this research work is to synthesize RO membranes which can be used to provide desalinated water for drinking, industrial and agricultural purposes. Hydrogen bonding between chitosan and PEG was confirmed by displacement of the hydroxyl absorption peak at 3237 cm⁻¹ in pure chitosan to lower values in crosslinked membranes by using FTIR. Dynamic mechanical analysis revealed that PEG lowers Tg of the modified membranes vs. pure chitosan from 128.5 °C in control to 120 °C in CS-PEG5. SEM results highlighted porous and anisotropic structure of crosslinked membranes. As the amount of PEG was increased, hydrophilicity of membranes was increased and water absorption increased up to a maximum of 67.34%. Permeation data showed that flux and salt rejection value of the modified membranes was increased up to a maximum of 80% and 40.4%, respectively. Modified films have antibacterial properties against Escherichia coli as compared to control membranes.     

A hybrid chaotic blowfish encryption for high-resolution satellite imagery

Multimedia Tools and Applications - In this article, we have designed a new information confidentiality mechanism based on the combination of Blowfish encryption algorithm along with Henon and Chen...     

Theoretical calculation simulation studies of ABV nuclear reactor coupled with desalination system

In this paper, research has been conducted on the floating type nuclear power plant named as ABV reactor which is designed for district heating, power, and sea water desalination by OKBM facility at Russia. This reactor was tested under different thermal loads during the designing phase, and three modules have been investigated. Theoretical calculations and simulation studies have been performed on these three modules having specifications as ABV‐6M with 47MW_th, ABV‐6 with 38MW_th, and ABV‐3 with 18MW_th.The results obtained from these modules have been calculated mathematically and verified by simulation. We have compared the originally derived data of ABV desalination system with our theoretical and simulation analysis. The results from two desalination techniques including RO and RO + MED have been calculated and are presented in this paper with details. The results obtained from both analysis show that the efficiency of ABV nuclear reactor desalination system increases with the decrease in corresponding water cost ratio. Copyright © 2015 John Wiley & Sons, Ltd.     

Sign Language to Sentence Formation: A Real Time Solution for Deaf People

Communication is a basic need of every human being to exchange thoughts and interact with the society. Acute peoples usually confab through different spoken languages, whereas deaf people cannot do so. Therefore, the Sign Language (SL) is the communication medium of such people for their conversation and interaction with the society. The SL is expressed in terms of specific gesture for every word and a gesture is consisted in a sequence of performed signs. The acute people normally observe these signs to understand the difference between single and multiple gestures for singular and plural words respectively. The signs for singular words such as I, eat, drink, home are unalike the plural words as school, cars, players. A special training is required to gain the sufficient knowledge and practice so that people can differentiate and understand every gesture/sign appropriately. Innumerable researches have been performed to articulate the computer-based solution to understand the single gesture with the help of a single hand enumeration. The complete understanding of such communications are possible only with the help of this differentiation of gestures in computer-based solution of SL to cope with the real world environment. Hence, there is still a demand for specific environment to automate such a communication solution to interact with such type of special people. This research focuses on facilitating the deaf community by capturing the gestures in video format and then mapping and differentiating as single or multiple gestures used in words. Finally, these are converted into the respective words/sentences within a reasonable time. This provide a real time solution for the deaf people to communicate and interact with the society.     

The X-prolyl dipeptidyl-peptidase PepX of Streptococcus thermophilus initially described as intracellular is also responsible for peptidase extracellular activity

This study addresses the hypothesis that the extracellular cell-associated X-prolyl dipeptidyl-peptidase activity initially described in Streptococcus thermophilus could be attributable to the intracellular X-prolyl dipeptidyl-peptidase PepX. For this purpose, a PepX-negative mutant of S. thermophilus LMD-9 was constructed by interrupting the pepX gene and named LMD-9-ΔpepX. When cultivated, the S. thermophilus LMD-9 wild type strain grew more rapidly than its ΔpepX mutant counterpart. Thus, the growth rate of the LMD-9-ΔpepX strain was reduced by a factor of 1.5 and 1.6 in milk and LM17 medium (M17 medium supplemented with 2% lactose), respectively. The negative effect of the PepX inactivation on the hydrolysis of β-casomorphin-7 was also observed. Indeed, when incubated with this peptide, the LMD-9-ΔpepX mutant cells were unable to hydrolyze it, whereas this peptide was completely degraded by the S. thermophilus LMD-9 wild type cells. This hydrolysis was not due to leakage of intracellular PepX, as no peptide hydrolysis was highlighted in cell-free filtrate of wild type strain. Therefore, based on these results, it can be presumed that though lacking an export signal, the intracellular PepX might have accessed the β-casomorphin-7 externally, perhaps via its galactose-binding domain-like fold, this domain being known to help enzymes bind to several proteins and substrates. Therefore, the identification of novel distinctive features of the proteolytic system of S. thermophilus will further enhance its credibility as a starter in milk fermentation.     

Household biomass fuel use is associated with chronic childhood malnutrition: Result from a nationwide cross-sectional survey in Bangladesh

Despite significant investment, childhood malnutrition continues to be a significant public health problem especially in least developed countries. The aim of this study was to find association between household biomass fuel (BMF) use and childhood malnutrition in Bangladesh using data from Demographic and Health Survey 2011. We included a total 6891 children under 5 years of age in the analysis. The prevalence of wasting, underweight, and stunting from BMF using household was 16.1% (n = 997; 95%CI, 15.1–17.3), 39.0% (n = 2399; 95%CI, 37.1–40.9), and 43.3% (n = 2620; 95%CI, 41.6–45.1), respectively. Underweight and stunting were significantly higher among children from households using BMF compared with the children from CF using households (underweight, biomass vs clean fuel: 39.0% vs. 23.5%, p < 0.001; stunting, biomass vs clean fuel: 43.3 vs. 31.5%, p < 0.001). The use of BMF in the household was significantly associated with underweight (OR = 1.38; 95%CI: 1.10–1.73) and stunting (OR = 1.58; 95%CI: 1.18–1.98) among children <5 years of age after adjusting possible confounders in mixed effect logistic regression analysis. This study found a significant association between chronic childhood malnutrition and household BMF use which is indicating possible alternative risk factor for malnutrition. Further prospective research is required to explore the mechanism of how BMF use results in chronic malnutrition.     

Current condition and future directions for lean construction in highways projects: A small and medium-sized enterprises (SMEs) perspective

The aim of this study is to identify the parameters defining how Lean Construction (LC) is being implemented (current condition) and how LC can be further promoted (future direction) from a Small-Medium Sized Enterprises (SMEs) perspective. Although SMEs constitute the largest group in construction supply chains, LC, as an emerging phenomenon in civil construction project management, has been rarely investigated from an SMEs perspective. Also, overlooking the more macro factors like project governance and supply chain management, LC deployments have been mainly discussed from a production process perspective to date. After a review of the extant literature and 20 interviews with managers from the highways sector, a list of 31 current condition and 40 future direction statements were produced, classified under the delivery, process, training, project governance and supply chain related headings and used in a questionnaire survey with 110 responses. The current condition highlights problems like a short-term relations structure, competitive tendering mechanisms, fragmentation, problems in engaging with SMEs for LC, unstandardised LC techniques, and issues with convincing SMEs to deploy LC by demonstrating the business case on mutual benefits. Action items relating to the current project delivery structure were given the highest importance by the supply chain, alongside the LC training and project governance issues for the future of LC at highways SMEs. Additionally, a statistically significant correlation was identified among many future action items.