The Young's moduli prediction of random distributed short-fiber-reinforced polypropylene foams using finite element method

The elastic moduli of short-fiber-reinforced foams depend critically on the fiber content and fiber length, as well as on the fiber orientation distribution. Based on periodic tetrakaidecahedrons, the finite element models with short-fiber reinforcement were proposed in this paper to examine the effects of the fiber content and fiber length on Young's modulus. The fiber length distribution and fiber orientation distribution were also considered. The proposed models featured in a three-dimensional diorama with random short-fiber distribution within or on the surfaces of the walls and edges of the closed-cells of polypropylene (PP) foams. The fiber length/orientation distributions were modeled by Gaussian prob-ability density functions. Different fiber volume fractions, different lengths, and different distributions were investigated. The predicted Young's moduli of the PP foams with short-glass-fiber or short-carbon-fiber reinforcement were compared with other theoretic and experimental results, and the agreement was found to be satisfactory. The proposed finite element models were proved to be acceptable to predict the Young's moduli of the grafted closed-cell PP foams with short-fiber reinforcement.     

Development of Zr/ZrO<Subscript>2</Subscript> high temperature and high pressure sensors for <Emphasis Type="Italic">in-situ</Emphasis> measuring chemical parameters of deep-sea water

In order to in situ measure chemical parameters of deep-sea water and hydrothermal fluids at midocean ridge(MOR), it is necessary to use high temperature and high pressure chemical sensors.Developing new sensors is essential to measure in-situ pH and other chemical parameters(dissolved H2, dissolved H2S) of deep-sea water and hydrothermal fluids in a wide temperature range(2℃―400℃) at MOR vents.The YSZ(Yttria Stabilized Zirconia, 9%Y2O3) ceramic-based(HgO/Hg) chemical sensors possess excellent electrochemic...     

Growth of Ag nanocrystals on multiwalled carbon nanotubes and Ag-carbon nanotube interaction

The experimental investigations on the interaction between Ag-nanocrystal particles (Ag-NCPs) and carbon nanotubes (CNTs) in Ag-nanocrystal particles/carbon nanotubes (Ag-NCPs/CNTs) hybrid structures were reported. The growth of Ag-NCPs on multiwalled carbon nanotubes (MWCNTs) was carried out by thermal evaporation deposition. High-resolution transmission electron microscopy and X-ray diffraction analyses revealed that Ag-NCPs had the crystal lattice feature of face-centered cube (fcc). The growth of Ag-NCPs on MWCNTs induced the cross-section deformation of MWCNT. The experimental results also showed that the synthesized Ag-NCPs/CNTs hybrid structure appeared as quasi-one dimensional nanowires containing the Ag-NCP/CNT hetero-junction. There was local cross-section deformation on MWCNTs at the interface of hetero-junction. These results involve the important topic about fundamental and practical studies for structure of MNCPs on CNTs and also find clues to further research of Ag nanocrystal growing on MWCNTs and related Ag-CNT interaction.     

水煤浆加压气化有关堵塞问题的探讨

通过对水煤浆加压气化装置中堵塞问题的原因分析 ,提出了具体的技术改造措施 ,并从操作方法上加以改进和调整     

清香木姜子的化学成分Ⅱ

利用硅胶柱层析分离及与标准品对照等方法从清香木姜子枝叶中分离得到4个化合物,1H NMR、13C NMR等技术及理化性质鉴定为:黄堇碱(1)、二十二酸(2)、二十六酸(3)、三十酸(4)。以上化合物均系首次从该植物中分离得到。     

从招工难看企业管理

招工难,难招工。这是今年不少制鞋企业的切身体会。各个工种的岗位亟待输血,福建晋江、成都武侯鞋都、福建石狮等地,不同程度存在缺工现象。由原来的大家到处找活干变为企业到处找工人来干活,劳务市场门庭若市的盛况不再,这种形势180度的大转变,直接导致了劳动密集的制鞋行业从未有过的人力资源紧缺的局面。     

Dissipative structures of autocatalytic reactions in tubular flow reactors

Dissipative structures of autocatalytic reactions with initially uniform concentrations are studied in tubular flow reactors. A unique steady state exists in a continuous stirred tank reactor. Linear stability analysis predicts either a stable node, a focus or an unstable saddle-focus. Sustained oscillations around the unstable focus can occur for high values of Damköhler number. In distributed parameter systems, travelling, standing or complex oscillatory waves are detected. For low values of Damköhler number, travelling waves with pseudo-constant patterns are observed. With intermediate values of Damköhler number, single or multiple standing waves are obtained. The temporal behavior indicates also the appearance of retriggering or echo waves. For high values of Damköhler number, both single peak and complex multipeak oscillations are found. In the cell model, both regular oscillations near the inlet and chaotic behavior downstream are observed. In the dispersion model, higher Peclet numbers eliminate the oscillations. The spatial profile shows a train of pulsating waves for the discret model and a single pulsating or solitary wave for the continuous model.     

Swelling and mechanical properties of superporous hydrogels of poly(acrylamide-co-acrylic acid)/polyethylenimine interpenetrating polymer networks

Swelling and mechanical properties were investigated for superporous hydrogels (SPHs) of poly(acrylamide-co-acrylic acid)/polyethylenimine (P(AM-co-AA)/PEI) interpenetrating polymer networks (IPNs). Gelation kinetics of SPHs changed significantly according to the acidic condition of reactant. The compressive strength of neutralized SPHs decreased monotonically with AA concentration, while the maximum swelling was observed around the AA weight fraction of 0.4 for all PEI concentrations. The SPH samples composed of high concentrations of AA and PEI were easily cracked in water due to the swelling stress developed during water uptake. The swelling kinetics decreased with increasing PEI and PAA concentrations because of the high molecular entanglement and network density associated with ionic interaction between PAA and PEI molecules. For non-neutralized SPHs, the equilibrium water uptake decreased but the compressive strength increased with PEI and PAA concentrations by simple plasticization effect.     

Continuous polymerization of lactam–lactone block copolymers in a twin‐screw extruder

Continuous copolymerizations of ?‐caprolactone with ?‐caprolactam and ω‐lauryl lactam were carried out in a modular intermeshing corotating twin‐screw extruder. Sodium hydride (initiator) and N‐acetyl caprolactam (coinitiator) were used to synthesize lactam–lactone copolymers in a twin‐screw extruder. We consider the variables of feeding order and feed rate of comonomers on the reactive extrusion of lactam–lactone copolymers. It was observed that simultaneous feeding of both monomers with initiator and coinitiator in the first hopper produced a mixture of homopolymers. When we fed the lactam into the first hopper and caprolactone sequentially into the second hopper, we obtained the lactam–caprolactone block copolymers. However, when we fed caprolactone first into the first hopper and the lactam into the second hopper, the extruded product was a mixture of poly(?‐caprolactone) and lactam monomer. We synthesized high molecular weight copolymers of poly(caprolactam‐b‐caprolactone) and poly(lauryl lactam‐b‐caprolactone) with different block lengths by sequential feeding of monomers. The block length of the block copolymer could be adjusted by controlling the feed rate of each monomer during reactive extrusion. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1429–1437, 2003     

Continuous ethanol production from wood hydrolysate by chemostat and total cell retention culture

Chemostat and total cell retention cultures with internal filter system ofSaecharomyc.es cerevisiae H1-7 were carried out to produce ethanol from wood hydrolysate. Maximum ethanol productivity obtained in a chemostat with the aeration rate of 1 vvm was 3.79 g/(L·h). This was 20% higher than that in a chemostat without aeration. However, the substrate was not completely consumed at the dilution rate with the maximum productivity. The realistic productivity, which has higher than 99% conversion rate of substrate, was. 2.95 g/(L·h). The maximum productivity in the total cell retention culture was 6.65 g/(L·h) at the dilution rate of 0.19 h¹ and the residual glucose concentration was negligible.