DARYN-a distributed decision-making algorithm for railway networks:modeling and simulation

The state of the art in scheduling “point-to-point” trains in a railway network utilizes the principles of centralized decision-making. The major difficulty of this approach is that the execution time and the memory requirements increase nonlinearly as the system grows in size. The present paper introduces a new approach, “DARYN”, wherein the overall decision process is analyzed and distributed onto every natural entity of the system. In DARYN, the decision process for every train is executed by an on-board processor that negotiates, dynamically and progressively, for temporary ownership of the tracks with the respective station controlling the tracks, through explicit processor to processor communication primitives. This processor then computes its own route utilizing the results of its negotiation, its knowledge of the track layout of the entire system, and its evaluation of the cost function. Every station's decision process is also executed by a dedicated processor that, in addition, maintains absolute control over a given set of tracks and participates in the negotiation with the trains. Presently, DARYN utilizes a simple cost function. However, if one chooses to increase the complexity of the cost function, DARYN's advantage over the traditional approach increases due to its enormous available computational power. Given that the current microprocessors such as MC68030, MC88000, Intel 486, and Intel 860 are powerful yet relatively inexpensive, a network of concurrently executing processors may offer superior price-performance quotient over a single high performance computer     

Eddy current probe sensitivity as a function of coil construction parameters

We report the results of the first phase of a study designed to quantify the relationship between eddy current coil construction and the performance of these coils used in nondestructive evaluation (NDE) inspections. The ferrite core coils wound for this study are small but typical of the sizes commonly used in commercially manufactured eddy current probes. Coil diameters range from 1 mm to 7 mm with lengths from 0.5 mm to 4 mm. Seven parameters were studied and included ferrite diameter, ferrite permeability, coil aspect ratio, number of turns, distance of the windings from the inspection end of the ferrite, wire gauge, and length of the ferrite beyond the end of the windings. Additionally, the coil set was designed to provide some indication of the repeatability of identical constructions, what we have called winding inhomogeneity. The coils were incorporated into surface probes for scanning defects in flat plate specimens. The measure of sensitivity was the change of probe impedance (Z) as the probe was scanned from an unflawed area to the flawed area of the test specimen. Measurements were also made of the component of Z perpendicular to the liftoff vector.The data reported here were produced from a set of 27 probes scanned over a single defect. The defect was an electrical-discharge-machined (EDM) notch in a 19 mm thick 7075-T6 aluminum alloy specimen. The part-circular EDM notch was 9 mm long and 3 mm deep and 0.1 mm wide.Analysis of the data shows that the number of turns, the winding distance, the coil aspect ratio, and the backside ferrite length all affect the coil sensitivity. Winding inhomogeneity is significant for coils having many winding layers and can be considerably larger than the contribution made by variations in some of the construction factors. Wire gauge, ferrite diameter, and permeability showed no significant effects on our measure of sensitivity in this study.     

An approximate analysis of the effect of micro fractures on the caustic of a dynamically moving crack tip

The optical recording of the conditions at the tips of dynamically moving cracks is often associated with a wave pattern which arises from what we call here radial waves. This observation is prevalent for tough solids, especially when the observation tools involve surface deformations such as the caustic method. These waves can modify the caustic shape and size and thus influence the interpretation of measurements. The quantification of the sources of these waves poses a very difficult problem so that a precise evaluation of that phenomenon is not yet possible. However, in an attempt to better understand the limitation imposed on the method of caustics by this set of waves this paper analyzes primarily the change of shape in the caustic associated with the passage of radial waves over the region of the initial curve of the caustic. The analysis is approximate in that the radial waves are assumed to be insensitive to the presence of the crack surfaces, but otherwise accounts for the three dimensional character of wave propagation in a plate of finite thickness.

---

Résumé On associe souvent l'enregistrement optique des conditions présentes à l'extrémité de fissures en cours de propagation spectaculaire, à une disposition ondulée, due à ce que l'on dénomme ici des ondes radiales. L'observation vaut surtout pour les corps à haute ténacité, et en particulier lorsque les méthodes d'observation tiennent compte des déformations de surface, comme la méthode des caustiques. Les ondes radiales peuvent altérer la forme et la dimension d'une caustique, et, de ce fait, influencer l'interprétation des mesures. Une évaluation précise de ce phénomène n'est pas encore possible, car la quantification des sources de ces ondes pose un problème trés délicat. Néanmoins, en vue de mieux comprendre les limites qu'impose à la méthode des caustiques la formation de ces ondes, on a analysé essentiellement le changement de forme de la caustique lorsque se développent des ondes radiales sur la région couverte par la courbe originale de la caustique. On procède à une approximation dans la mesure où on suppose que les ondes radiales sont insensibles à la présence des surfaces de la fissure, mais prennent par ailleurs en considération le caractère tridimensionnel de la propagation d'une fissure dans une plaque d'épaisseur finie.

     

Preparation of high-purity antimony by electrodeposition

Detailed studies were carried out on the electrowinning of antimony from SbCl₃–HCl–H₂SO₄ and SbCl₃–HCl baths using a graphite anode and a tantalum cathode, the anode being enclosed in a cylindrical glass compartment provided with a sintered disc. Disintegration of the graphite anode increased with increase in anode current density and duration of electrolysis. Analysis of gas evolved at the anode indicated that the presence of sulphuric acid increased the production of CO₂. The anodic disintegration was reduced to a negligibly low value by circulation of 6m HCl through the anode compartment. Optimum conditions were determined for electrowinning of antimony from a SbCl₃–HCl bath. The tantalum content in the metal was 0.1–0.2 p.p.m.     

Characterization of microstructural changes during annealing of cold worked austenitic stainless steel using ultrasonic velocity measurements and correlation with mechanical properties

A technique that is sensitive to change in texture is more reliable than mechanical property measurements for the study of recrystallization behavior in alloys where recrystallization is coupled with precipitation. Hence, ultrasonic velocity measurements have been employed to characterize microstructural changes during annealing of cold worked Ti-modified austenitic stainless steel where precipitation of TiC is known to retard recrystallization. Mechanical property measurements, such as strength and hardness, could not distinguish the recovery and recrystallization regimes, and it was difficult to determine the exact time or temperature for onset of recrystallization. The variation of velocity with annealing time or annealing temperature exhibited a three-stage behavior. The velocity exhibited a slight increase in the recovery region followed by a sharp and continuous decrease in the recrystallization region and reached saturation on completion of recrystallization. Based on the microstructural investigations, the three stages were identified to be recovery, progress of recrystallization, and completion of recrystallization. Velocity measurements could sense the onset, progress, and completion of recrystallization more accurately compared with that of hardness and strength measurements.     

Gaming Social Capital: Exploring Civic Value in Multiplayer Video Games

Recent research suggests that social interactions in video games may lead to the development of community bonding and prosocial attitudes. Building on this line of research, a national survey of U.S. adults finds that gamers who develop ties with a community of fellow gamers possess gaming social capital, a new gaming‐related community construct that is shown to be a positive antecedent in predicting both face‐to‐face social capital and civic participation.     

uWave: Accelerometer-based personalized gesture recognition and its applications

The proliferation of accelerometers on consumer electronics has brought an opportunity for interaction based on gestures. We present uWave, an efficient recognition algorithm for such interaction using a single three-axis accelerometer. uWave requires a single training sample for each gesture pattern and allows users to employ personalized gestures. We evaluate uWave using a large gesture library with over 4000 samples for eight gesture patterns collected from eight users over one month. uWave achieves 98.6% accuracy, competitive with statistical methods that require significantly more training samples. We also present applications of uWave in gesture-based user authentication and interaction with 3D mobile user interfaces. In particular, we report a series of user studies that evaluates the feasibility and usability of lightweight user authentication. Our evaluation shows both the strength and limitations of gesture-based user authentication.     

Opposition Based Joint Grey Wolf-Whale Optimization Algorithm Based Attribute Based Encryption in Secure Wireless Communication

Wireless Personal Communications - One of the applications of Sparse Linear Wireless Sensor Networks is environmental monitoring. In these networks, sensors are deployed in sensitive and strategic...     

Optimization of A-TIG process parameters using response surface methodology

In the present work, the influence of process parameters such as welding current (I), welding speed (S), and flux coating density (F) on different aspects of weld bead geometry for example depth of penetration (DOP), bead width (BW), depth to width ratio (D/W), and weld fusion zone area (WA) were investigated by using the central composite design (CCD). 9–12% Cr ferritic stainless steel (FSS) plates were welded using A-TIG welding. It was observed that all input variables have a direct influence on the DOP, BW, and D/W. However, flux coating density has no significant effect on WA. Mathematical models were generated from the obtained responses to predict the weld bead geometry. An optimized DOP, BW, D/W, and WA of 6.95?mm, 8.76?mm, 0.80, and 41.99?mm², respectively, were predicted at the welding current of 213.78 A, the welding speed of 96.22?mm/min, and the flux coating density of 1.99?mg/cm². Conformity test was done to check the practicability of the developed models. The conformity test results were in good agreement with the predicted values. Arc constriction and reversal in Marangoni convection were considered as major mechanisms for the deep and narrow weld bead during A-TIG welding.