Catalysts for the Ethoxylation of Esters

The intermediates for the production of nonionic surfactants can be derived from petrochemicals and/or from renewable raw materials. In both, the role of catalysis is fundamental. In this paper the main results reported in the literature related with the catalysis for ethoxylation of fatty esters will be reviewed. The main open challenges for these technologies will be outlined.     

Thermal evolution and crystallisation of polydimethylsiloxane–zirconia nanocomposites prepared by the sol–gel method

Polydimethylsiloxane–zirconia nanocomposites have been prepared by hydrolysis of diethoxydimethylsilane and zirconium n-propoxide in different molar ratios. Transparent, homogeneous and non-porous xerogels have been obtained up to 70 mol% ZrO₂ content. The starting xerogels have been pyrolyzed under argon atmosphere up to 1400°C and the structural evolution of samples treated at different temperatures has been followed by X-ray diffraction, transmission electron microscopy, infrared and ²⁹Si solid state nuclear magnetic resonance spectroscopies, thermal analyses and N₂ sorption measurements. The polymer-to-ceramic conversion leads to the structural rearrangement of the siloxane component with the production at 600°C of high surface area materials with pore sizes below 3 nm. Samples are amorphous up to 800°C. At 1000°C, the structural evolution of the silicon moiety produces an amorphous oxycarbide phase whereas the primary crystallisation of tetragonal zirconia takes place, with crystallinity and crystallite sizes depending on the ZrO₂ content. At 1400°C, the silicon oxycarbide phase generates a mixture of amorphous silica and crystalline silicon carbide polymorphs. In this matrix, tetragonal and monoclinic ZrO₂ phases are present with ZrO₂ average crystallite dimensions never exceeding 20 nm, for ZrO₂ content ≤50 mol%. The tetragonal/monoclinic ratio as well as the crystallite sizes appear strictly related to the chemical composition. ©     

A decision-support system for the design and management of warehousing systems

The issue of material handling involves the design and operative control of warehousing systems (i.e., distribution centres), which allow matching vendors and demands, smoothing with seasonality, consolidating products and arranging distribution activities. Warehousing systems play a crucial role in providing efficiency and customer satisfaction. The warehouse design entails a wide set of decisions, which involve layout constraints and operative issues that seriously affect the performances and the overall logistics costs.     

Linear optimal control strategies for production systems with a discrete-event demand pattern

A class of production systems are considered in this paper with the aim of determining closed-loop strategies providing the production effort as functions of the system state. The key feature of the considered class of systems is that the demand and the way it is satisfied are asynchronous sequences of part requests and instantaneous withdrawals, respectively, generated by discrete-event processes, whereas the production process has continuous-time dynamics. The optimization problem, whose objective is to minimize inventory and lateness costs, is restated as an optimal control problem by exploiting some structural properties of the optimal solution. Then, optimal closed-loop strategies are found with dynamic programming techniques.     

意大利创意城市:新景象与新项目

《国际城市规划》(UPI)于2009年出版了一辑专刊,介绍了意大利城市规划的相关情况和背景.意大利是一个具有2 000多年文化创造传统的国度,城市在意大利的发展历程中始终发挥着重要作用.作为一个事实上的城邦国家,意大利的城市发展深受根植于当地的市民文化. 1城市新景象 最近几年,从佛罗里达(Florida)和兰德利(Landry)的著作开始,人们对“创意”这一城市竞争要素的反思和实验交织在一起,引发了对其理论与实践的进一步反省,其目的是为了给创意城市提供更宽阔的空间,付诸实际行动,提高实施效果,改善生活品质.     

FRP confinement of masonry: analytical modeling

International and National Building Codes provide requirements for design and construction of new masonry structures, but design provisions for the repair, retrofitting, and rehabilitation of masonry structures are not always available and included in the same documents. Due to the extremely large variability in masonry performances, equations of general validity cannot often be provided, namely relationships suitable for every masonry type. Despite the great research effort in the experimental field, considerable theoretical work is still needed to fully outline a definitive analytical model to predict the behavior of FRP confined masonry. Most of the available models, empirical in nature, have been calibrated against their own sets of experimental data, or they are simply derived from concrete. Even if large amount of results obtained for concrete led to consolidated design guidelines, they cannot be simply extended to masonry. In this study, a mechanically based confinement model is proposed based on mechanical parameters able to differentiate similar masonry types and to highlight that they present different confinement performance. Crucial aspects of masonry confinement will be also discussed, namely: lateral dilation; confinement effectiveness; lateral pressure also in non-circular shapes; effective strain of FRP.     

Increasing espresso coffee brew antioxidant capacity using phenolic extract recovered from hazelnut skin waste

The simultaneous consumption of different classes of phytochemical antioxidants in the diet can result in more beneficial effects than when consumed alone. In the present study, the in vitro and in vivo antioxidative effects of espresso coffee brew (EC) (rich in chlorogenic acids) with added crude hazelnut skin phenolic extract (HSPE) from hazelnut skin waste (rich in flavonoids) were studied. Both post-brewing and pre-brewing phenolic-enriched espresso coffees (PE-ECs) were analysed for total phenols and screened for their in vitro antiradical ability. Moreover, the in vivo biological effect on the antioxidant potential of plasma in rats was evaluated. The PE-ECs showed increased both in vitro and in vivo antiradical activity proportional to the added HSPE. The in vivo experiments suggested that HSPE was much more antioxidant active than the phenolic fraction naturally contained in EC. Moreover, evidence of possible synergic effects of EC and HSPE phenolics was observed in vivo.     

Modeling and control of an airbrake electro‐hydraulic smart actuator

In this paper, an accurate model of an airbrake electro‐hydraulic smart actuator is obtained by physical considerations, and then different control strategies (variable‐gain proportional control, PT₁ control with switching integrator, and second order sub‐optimal sliding mode control) are proposed and analyzed. This application is innovative in the avionic field, and is one of the first attempts to realize a fly‐by‐wire system for airbrakes, oriented to its immediate employment and installation on current aircraft. The project was carried on with the participation of the Italian Ministry of Defense, and was commissioned to MAG, a leading provider of integrated systems and aviation services for aerospace. Copyright © 2011 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society