Phase Relations and Volume Changes of Hafnia under High Pressure and High Temperature

Using multi-anvil high-pressure devices and synchrotron radiation, X-ray in situ observations of HfO₂ under high pressure and high temperature have been performed to investigate its phase relations and compression behavior. An orthorhombic phase (orthoI) is stable from 4 to 14.5 GPa below 1250°–1400°C and transforms to a tetragonal phase, which is one of the high-temperature forms of HfO₂, above these temperatures. Another orthorhombic phase (orthoII) with a cotunnite-type structure appears above 14.5 GPa. OrthoII is stable up to 1800°C at 21 GPa. OrthoII is quenchable to ambient conditions. The orthoI-to-orthoII transition is accompanied by ∼8 vol% decrease. The bulk moduli of orthoI and orthoII at room temperature are 220 and 312 GPa, respectively. This low compressibility of orthoII indicates that it is a potential candidate for very hard materials.     

Immunomodulatory effect of mushrooms on cytotoxic activity and cytokine production of intestinal lamina propria leukocytes does not necessarily depend on β-glucan contents

We evaluated the effects of seven mushroom extracts (Grifola frondosa, Pholiota nameko, Panellus serotinus, Hypsizygus marmoreus, Pleurotus cornucopiae, Armillaria mellea, and Flammulina velutipes) on cytotoxic activity and cytokine production of lamina propria leukocytes (LPLs) isolated from rat small (S) and large (L) intestinal mucosa. Boiling water extracts from seven species of mushrooms showed no direct cytotoxicity against the YAC-1 target cells. However, prominent increases of cytotoxicity were observed in S- and L-LPLs co-cultured with P. serotinus extract. Cytokine production (TNFα, IFNγ, IL-12 p70, and IL-4) of S- and L-LPLs was stimulated in response to P. cornucopiae extract. Mushroom extracts contributed to target cell adhesion and/or cytokine production in the effector cells. The promotion of cytotoxic activity in S- and L-LPLs was not necessarily related to β-glucan content of the mushroom.     

Reappraisal of loading rate effects on sand behavior in view of seismic design for pile foundation

This study re-visits the effects of loading rate on sand behavior in view of seismic design of pile foundation. Based on an extensive literature review covering both element testing and model testing, the paper summarizes the current understanding of the loading rate effects. The paper then describes the development of test apparatus used in this study and presents the data obtained from a series of monotonically increasing triaxial compression tests on Toyoura sand, varying the strain rate in the range of 0.005%/s to 250%/s. A total of 36 tests were conducted on dry and saturated sand, both under drained and undrained conditions with two confining pressures. The experimental results confirm that the soil strength and the soil stiffness increase as the strain rate increase. This paper also concludes that the internal friction angle and deformation modulus increase when the strain rate is high. The implications of the loading rate effect on pile foundation design are then presented.     

Nanostructured poly(3-hexylthiophene-2,5-diyl) films with tunable dimensions through self-assembly with polystyrene

Poly(3-hexylthiophene-2,5-diyl) is among the most widely used conjugated polymers for opto-electronic applications. To enhance its properties, researchers have attempted to nanostructure this polymer using various processes including breath figure arrays, nanolithography and elaborated organic synthesis. We here demonstrate a simple process to nanostructure the conjugated polymer using self-assembly with polystyrene and selective removal of one of the phases. The influence of the molecular weight of each polymer on the thin film morphology was systematically studied by atomic force microscopy. Using this approach, we observe two types of nanostructure, namely, nanoporous and nanoisland structures, of which the dimensions can be tuned by modifying the molecular weight of each polymer in the blend. This simple process introduces a cost-effective alternative to produce thin films of conjugated polymer with average nano-features from 100 nm up to 500 nm which could be used in a wide range of applications.     

Simultaneous design of the sensory morphology and controller of mobile robots

This paper proposes a method for automatic design of the sensory morphology of a mobile robot. The proposed method employs two types of adaptations, ontogenetic and phylogenetic, to optimize the sensory morphology of the robot. In ontogenetic adaptation, reinforcement learning searches for the optimal policy, which is highly dependent on the sensory morphology. In phylogenetic adaptation, a genetic algorithm is used to select morphologies with which the robot can learn tasks faster. Our proposed method was applied to the design of the sensory morphology of a line‐following robot. We performed simulation experiments to compare the design solution with a hand‐coded robot. The results of the experiments revealed that our robot outperformed the hand‐coded robot in terms of the following accuracy and learning speed, although our robot had fewer sensors than the hand‐coded one. We also built a physical robot using the design solution. The experimental results revealed that this physical robot used its morphology effectively and outperformed the hand‐coded robot. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 172(1): 48–57, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20965     

Mixing speed-controlled gold nanoparticle synthesis with pulsed mixing microfluidic system

Gold nanoparticles with diameters of a few tens of nanometer and a narrow size distribution were synthesized using a pulsed mixing method with a microfluidic system which consists of a Y-shaped mixing microchannel and two piezoelectric valveless micropumps. This mixing method enables control of the mixing speed of gold salts and reducing agent by changing the switching frequency of the micropumps, which was our focus to improve the particle size distribution, which is an essential parameter in gold nanoparticle synthesis. In the proposed method, the mixing time was inversely proportional to the switching frequency and the minimum mixing time was 95 ms at a switching frequency of 200 Hz. During synthesis experiments, the mean diameter of the synthesized gold nanoparticles was found to increase, and the coefficient of variation of particle size was found to decrease with decreasing mixing time. We successfully improved the coefficient of variation to less than 10% for a mean diameter of around 40 nm.     

Foundations

Foundation engineering emerged as a discipline of modern engineering science in 1940s. Design and analysis as well as practice of foundation engineering have made a significant progress up to the present time. This paper gives an overview of the development of foundation engineering, mainly referring to papers published in Soils and Foundations. The paper describes the theoretical development of foundation analysis and a recent increasing trend of foundation practice of adopting various hybrid foundations. The paper points out the importance of environmental considerations in foundation design and practice, including low noise and vibration reduction, reuse of existing foundations and use of natural energy through foundation elements. The paper then provides authors’ views of future directions in foundation studies and practice.