This paper develops a two-dimensional spatial framework, in which firms have the technique of flexible manufacturing and engage in spatially discriminatory pricing, in order to explore the firms’ optimal locations and optimal attributes of basic products under linear transportation costs. The paper shows that the two firms will agglomerate at the center of the location line and the optimal attributes of the two basic products will be located at the first and third quartiles of the attribute line, respectively, when the ratio of the marginal modification rate to the transport rate is high. It also shows that the two firms will locate separately on the location line and that the optimal attributes of the two basic products will remain at the first and third quartiles, when this ratio is moderate. Moreover, this paper proves that the two firms will locate at the first and third quartiles of the location line, respectively, and that the attributes of the basic products will agglomerate at the center of the attribute line, when this ratio is low. 相似文献
To evaluate the effect of intracanal medicaments on the push-out bond strength of Biodentine in comparison with DiaRoot BioAggregate (BA) when used as apical plugs. Forty single-rooted teeth were prepared using Peeso reamers. The samples were divided into four groups. The intracanal medicaments were applied to the root canals as follows: Group1: a combination of metronidazole–ciprofloxacin–cefaclor, Group2: a combination of metronidazole–ciprofloxacin, Group3: calcium hydroxide, and Group4: no medication. After 21 days, the medicaments were removed. The apical part of each root was horizontally sectioned into 1-mm thick slices. The samples were divided into two subgroups, and the following materials were placed: Biodentine, DiaRoot-BioAggregate. After 48-h incubation, the push-out bond strength was measured. The data were analyzed by a two-way ANOVA. Biodentine showed a significantly higher mean push-out bond strength value than DiaRoot-BioAggregate (P = 0.00). The medications have an effect on the push-out bond strength of both materials (P = 0.002). Biodentine showed better adhesive performance as an apical plug than DiaRoot-BioAggregate. 相似文献
This work aims to study the thermal behavior of basic-geopolymers derived from metakaolin (clay). The geopolymers were characterized by different techniques: thermal analysis (DTA, TGA), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and impedance spectroscopy. Some physicochemical properties of the products were also determined: the phases obtained after geopolymer heat treatment and their electrical properties. The results obtained after drying and heat treatment showed that the products kept their initial shapes, but revealed variable colors depending on the temperatures at which they were treated. The products obtained are amorphous between 300 up to 600 °C with peaks relating to the presence of nanocrystallites of muscovites and zeolite, thus at 900 °C it is quite amorphous but only contains nanocrystallites of muscovites. From the temperature of 950 °C, we notice that the geopolymer has been transformed into a crystalline compound predominated by the Nepheline (NaAlSiO4) with the presence of a crystalline phase by minor peaks of Muscovite, this crystalline character has been increased at 1100 °C to obtain a whole phase crystalline of a Nepheline. The treatment of this geopolymer for one hour at 1200 °C shows an amorphous phase again corresponding to corundum (α-Al2O3). This indicates that the dissolution of the grains by the liquid phase induces the conversion of the material structure from sialate [–Si–O–Al–O] to sialate siloxo [–Si–O–Al–O–Si–O–] and the formation of a new crystalline phase (α-Al2O3). This development of sialate to sialate-siloxo was confirmed by IR spectroscopy. As mentioned above, from 300 to 900 °C, Na-sialate geopolymer exhibits the same disorder structure of nepheline. The crystal structure of nepheline is characterized by layers of six-membered tetrahedral rings of exclusively oval conformation. The rings are built by Regularly alternating tetrahedral AlO4 and SiO4. Stacking the layer’s parallel to the c axis gives a three-dimensional network containing channels occupied by Na cations. This topology favors easy movement of Na+ ions throughout the structure. For this reason, ionic migration in nepheline is widely reported. The refinement of Na-Sialate geopolymer at room temperature gives bulk high ionic conductivity of about 5 × 10?5 S cm?1 and this is due to the probable joint contribution of H+ and Na+ ions. Above 200 °C, Na+ seems to remain the only charge carrier with a low activation energy of about Ea?=?0.26 eV. At higher temperatures, the characteristic frequencies become so close that it is impossible to distinguish the contributions. A total resistance comprising both grain and grain boundaries contribution is then determined.
This paper proposed a new technique to suppress the four-wave mixing (FWM) effect by using a smart filter technique. The behaviour of FWM and the performance of wavelength division multiplexing systems with 4 and 16 channels were simulated in the presence of the proposed technique. The simulation was also performed under different parameters such as input power, number of channels and channel spacing. The FWM power drastically decreases by 12 and 19 dB for the 4 and 16 channels, respectively, when the smart filter is used as compared with the conventional system. In terms of system performance, the suggested approach for 4 and 16 channels at the first channel offers low bit error rate (BER) values of 3.23 × 10?23 and 1.7 × 10?21, respectively. The smart filter with the channel spacing variation for the 4-channel system subsequently improved the BER value at the fourth channel. Results confirm that the smart filter approach is an active solution that can suppress the FWM effect in optical transmission systems. 相似文献
Nanoscale bioactive glasses have been gaining attention due to their reported superior osteoconductivity when compared to conventional (micron-sized) bioactive glass materials. The combination of bioactive glass nanoparticles or nanofibers with polymeric systems enables the production of nanocomposites with potential to be used in a series of orthopedic applications, including scaffolds for tissue engineering and regenerative medicine. This review presents the state of art of the preparation of nanoscale bioactive glasses and corresponding composites with biocompatible polymers. The recent developments in the preparation methods of nano-sized bioactive glasses are reviewed, covering sol–gel routes, microemulsion techniques, gas phase synthesis method (flame spray synthesis), laser spinning, and electro-spinning. Then, examples of the preparation and properties of nanocomposites based on such inorganic bionanomaterials are presented, obtained using various polymer matrices, including polyesters such as poly(hydroxybutyrate), poly(lactic acid) and poly(caprolactone), and natural-based polymers such as polysaccharides (starch, chitin, chitosan) or proteins (silk fibroin, collagen). The physico-chemical, mechanical, and biological advantages of incorporating nanoscale bioactive glasses in such biodegradable nanocomposites are discussed and the possibilities to expand the use of these materials in other nanotechnology concepts aimed to be used in different biomedical applications are also highlighted. 相似文献
Over-expression of the yeast PEP4 gene encoding the vacuolar aspartic protease proteinase A (PrA) leads to saturation of the vacuolar targeting system of the cell and missorting of PrA to the growth medium. In a screen for genes affecting the secretion of over-expressed PrA we found that multiple copies of the open reading frame (ORF) YAL048c enhanced PrA secretion. Since no function has hitherto been ascribed to YAL048c, we undertook further studies of this ORF. Deletion of YAL048c resulted in slightly reduced secretion of over-produced PrA. Furthermore, strains deleted for YAL048c showed a growth inhibition phenotype resulting in wrinkled colony morphology when grown on rich medium containing high concentrations of calcium. YAL048c is predicted to encode a polypeptide of 662 amino acid residues containing two consensus ATP/GTP-binding site motifs and a putative carboxy-terminal transmembrane region. In addition, the amino acid sequence contains two putative calcium-binding domains. The YAL048c protein may be evolutionarily conserved, as homologues exist in humans and Caenorhabditis elegans. We suggest that the YAL048c protein is involved in vesicle transport in the secretory pathway. 相似文献
Cyanobacterial neurotoxins have been implicated in animal deaths resulting from drinking contaminated water. Anatoxin-a (AN) and homoanatoxin-a (HMAN) have previously been analysed using high-performance liquid chromatography (HPLC) with UV detection, but this procedure is insufficiently sensitive and is subject to interferences. A sensitive fluorimetric (FL) method for determining AN was recently developed using derivatisation with 4-fluoro-7-nitro-2,1,3-benzoxadiazole (NBD-F) and this has been applied to the simultaneous determination of AN, HMAN and their epoxy and dihydro degradation products. Microscale syntheses were used to prepare the dihydro and epoxy derivatives from AN and HMAN. These compounds were produced in high yields, as confirmed by electrospray MS and HPLC-FL of their benzoxadiazole derivatives. All six NBD derivatives were readily separated using isocratic reversed-phase HPLC. The recoveries of these compounds from spiked water samples, using weak cation-exchange (WCX) solid-phase extraction (SPE), were 83.2-84.9% at concentrations of 10 micrograms/l. The R.S.D. values were 1.7-3.9% (n = 8) and the limits of detection were better than 10 ng/l for all six compounds, illustrating the high sensitivity of the method. This methodology was successfully applied to the analysis toxin degradation products in natural samples. Dihydroanatoxin-a (0.8 mg/g) was isolated from a benthic Oscillatoria bloom from Caragh Lake, Ireland, and was found to contain two isomers but their ratio was different from that found in the synthetic material. 相似文献