Predictive equation for acquisition of hepatitis B in hospital workers in a general hospital

A cross-sectional study was performed to obtain risk factors for hepatitis B disease, HBsAg carriers and immunised personnel, among 2470 workers in a general hospital in Madrid, Spain. The data obtained were analyzed with multiple logistic regression to obtain beta coefficients for variables. The results of the analysis show that being a nurse or being regularly exposed to blood are the most important risk factors for hepatitis B acquisition. The length of time working at the same job activity was also a risk factor. The resulting beta coefficients allow the construction for a hepatitis non-immunised, HBsAg carrier and immunised HBV status, which can select subjects for a hepatitis B vaccination program.     

Expression of laminin and nidogen genes during the postimplantation development of the mouse placenta

The expression patterns of laminin A, B1, B2, and nidogen genes were identified by in situ hybridization in postimplantation mouse extraembryonic tissues and maternal decidua during the period when the chorioallantoic placenta is established. Laminin and nidogen genes were not coordinately expressed either in the decidua or in trophoblast cells, indicating that these genes are regulated independently in these cell types during the establishment of the placenta. Laminin A mRNA was absent from the decidua except in the outer layer of cells adjacent to the myometrium and in the central decidual zone adjacent to the remnant of the uterine epithelium on Day 9. At this stage laminin B1, B2, and nidogen genes were strongly expressed in these cells and also in other regions of the decidua. Laminin B1 mRNA was present at higher levels in the decidua capsularis than in the decidua basalis, while nidogen mRNA showed highest expression in the decidua basalis. Laminin B2 mRNA was produced uniformly throughout the decidua at very high levels, suggesting that laminin B2 chains may be an important component of the decidual matrix. By Day 11, the nidogen gene was expressed only in endothelial cells lining the maternal blood spaces within the decidua. Laminin B1 and nidogen mRNAs were found at high levels within trophoblast giant cells at all stages, while laminin A mRNA was detected in trophoblast giant cells at later stages and laminin B2 mRNA was not produced in high levels by these cells. The patterns of gene expression show a very high degree of regional specialization, suggesting that the extracellular matrices in different regions of the decidua and extraembryonic membranes are likely to be composed of quite different ratios of laminin and nidogen polypeptides.(ABSTRACT TRUNCATED AT 250 WORDS)     

Methodological issues in outcome studies of school-based interventions for the prevention of adolescent depression.

Several methodological and ethical issues are addressed in the context of 3 related school-based studies of the primary and targeted prevention of depressive symptoms and disorder in high school adolescents. These issues include obtaining S consent and the protection of confidentiality, minimizing attrition over long-term follow-up periods, the "unit of assignment" issue common to most school-based research, and ensuring therapist fidelity to the intervention protocol. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

The evolution of custom microarray manufacture

Given the enormous size of the genome and that there are potentially many other types of measurements we need to do to understand it, it has become necessary to pick and choose one's targets to measure because it is still impossible to evaluate the entire genome all at once. What has emerged is a need to have rapidly customizable microarrays. There are two dominant methods to accomplish custom microarray synthesis, Affymetrix-like microarrays manufactured using light projection rather than semiconductor-like masks used by Affymetrix to mass manufacture their GeneChip/sup TM/ arrays now, or the ink-jet printing method employed by Agilent. The manufacture of these custom Affymetrix-like microarrays can now be done on a digital optical chemistry (DOC) machine developed at the University of Texas Southwestern Medical Center, and this method offers much higher feature numbers and feature density than is possible with ink-jet printed arrays. On a microarray, each feature contains a single genetic measurement. The initial DOC prototype has been described in several publications, but that has now led to a second-generation machine. This machine reliably produces a number of arrays daily, has been deployed against a number of biomedical questions, is being used in new ways and has also led to a number of spin-off technologies.     

A comparative analysis of fuzzy logic and PI speed control in high-performance AC drives using experimental approach

One of the frequently discussed applications of artificial intelligence in motion control is the replacement of a standard proportional plus integral (PI) speed controller with a fuzzy logic (FL) speed controller. Regardless of all the work, it appears that a thorough comparison of the drive behavior under PI and FL speed control is still missing. This paper attempts to fill in this gap, by providing an in-depth comparison of operation of a vector-controlled permanent-magnet synchronous motor, using at first an experimental rig. Speed responses, obtained under PI and FL speed control, are recorded and compared for a variety of operating conditions. The transients studied include response to a large step speed command from standstill with nominal inertia and an increased inertia, response to small step speed reference change, and response to step load torque application. The transient behavior is examined for various initial speed settings, so that a thorough comparison is enabled. Experimental results are further supplemented with a set of simulation results, obtained using a different permanent-magnet machine and a different FL controller. Better generalization of the results is enabled in this way. It is shown that superiority of the FL speed control is less pronounced than it is often portrayed in the literature on the basis of limited comparisons. Indeed, in a number of cases, PI speed control provides a superior speed response.     

双塔脱丙烷工艺技术

对扬子乙烯装置双塔脱丙烷系统低压塔液泛、高压塔再沸器堵塞等问题进行了技术分析,提出了工艺流程修改方案,完善了双塔脱丙烷技术,对同类装置有参考价值。     

Photoelectric properties of planar structures with double Schottky barrier treated in a high-vacuum microwave discharge

The state of the surface of n-GaAs crystals upon high-vacuum microwave plasmachemical (HVMWPC) etching in various gas mixtures and the influence of the semiconductor surface condition on the photoelectric characteristics of related metal-semiconductor-metal structures with double Schottky barrier (MSMDSB structures) are investigated. Dependence of the HVMWPC etching rate of the GaAs surface on the gas mixture composition and substrate temperature is determined. It is shown that the HVMWPC etching regime strongly influences the photoelectric properties of MSMDSB structures: the treatment can lead to either growth or drop in photosensitivity of the samples. Optimum etching regimes are established for which good semiconductor surface quality and high photosensitivity of the MSMDSB structures are retained at a high etching rate.     

Processing of Yttria-Alumina Coated Silicon Nitride Slips by Slip Casting

Si₃N₄powders coated with 6 wt% Y₂O₃and 4 wt% Al₂O₃were prepared by coprecipitation. The resulting powders were dispersed in water at different pH values and with addition of various amounts of ammonium polyacrylate (NH₄PA) to produce 32 vol% slips. The influence of the amount of NH₄PA solution added and pH on the rheological properties of 32 vol% coated Si₃N₄slips were studied. In addition, the sintered density of cast samples was determined and related to the degree of slip dispersion. The adsorption of the NH₄PA on the coated particle surface was rather high and the surface became saturated near 0.86 mg/m²at pH 9.2. High NH₄PA concentrations (1.7–3 wt%) were necessary to obtain well dispersed 32 vol% coated Si₃N₄slips at pH 9.2. The best stabilization was obtained with the addition of 2.3 wt% NH₄PA; in this condition, the viscosity reached a minimum value of 35 mPa.s at 100 s^–1. The slip viscosity increased with increasing pH from 9.2 to 10.2. Slips with low viscosities gave a more dense packing of cast samples and consequently higher sintered density values.