Quest for the Crypto-phosphoproteome

Protein phosphorylation is one of the most studied post-translational modifications (PTMs). Despite the remarkable advances in phosphoproteomics, a chemically less-stable subset of the phosphosites, which we call the crypto-phosphoproteome, has remained underexplored due to technological challenges. In this Viewpoint, we briefly summarize the current understanding of these elusive protein phosphorylations and identify the missing pieces for future studies.     

Effects of intermetallic compound on the electrical and mechanical properties of friction welded Cu/Al bimetallic joints during annealing

Al/Cu metal joints applied for the electrical connector was joined by the friction welding method to limit the formation of intermetallic compound under optimum friction welding condition. To guarantee the reliability of the Al/Cu joints in service requirement, the effects of the intermetallic compound layer on the electrical and mechanical properties have been investigated under various annealing conditions. Two kinds of intermetallic compounds layer were formed in the joints interface and identified by AlCu and Al₂Cu. The growth kinetic of these intermetallics during the annealing can be followed by volume diffusion process. The activation energy of Al₂Cu, AlCu and total intermetallic compound (AlCu + Al₂Cu) represented 107.5, 98.42 and 110.22 kJ/mol, respectively. A thicker intermetallic compound layers could seriously degrade the electrical resistivity and tensile strength. The electrical resistivity with 21 μm thickness of intermetallic compound was 45 μΩ cm and increased to be 85 μΩ cm with 107 μm of intermetallic compound. Tensile strength remarkably decreased from 85 MPa to near zero at the annealing condition of 773 K and 129.6 ks and fracture occurred through the intermetallic compound layers.     

Blends of chlorinated isotactic polypropylene with poly(ethylene-co-vinyl acetate) II. Phase studies of the miscible blends

By measuring T_g, T_m and T_c (cloud point) phase diagrams for the four miscible blends of chlorinated isotactic polypropylenes (chlorine content 39.2 (CPP-40) and 49.8 wt.-% (CP-50)) with Poly(ethylene-co-vinyl acetate)s (vinyl acetate contents 40 (EVA-40) and 45 wt.-% (EVA-45)) were investigated. The blend of CPP-50 with EVA-40 was the most compatible of the four blend pairs.     

Microwave Dielectric Properties of CaTiO3-Ca(Al1/2Ta1/2)O3 Ceramics

The microwave dielectric properties of CaTi_1-χ(Al_1/2Ta_1/2)_cHO₃ solid solutions (0.3 ≤χ≤ 0.5) have been investigated. The ceramic samples had perovskite structures similar to CaTiO₃. The partial substitution of Ti₄₊ by a coupled Al₃₊/Ta_s+ permitted improvement of the quality factor Q . The dielectric constant (τ_r) and temperature coefficient of resonant frequency (τ_r) decrease rapidly with an increase of χ. A new high-quality microwave dielectric material was found at χ= 0.46 with σ_r= 46.5, Q f = 27300 GHz, and π_f= 0 ppm/°C. The relationship between microstructures and dielectric properties is presented.     

Bücherschau

Ohne Zusammenfassung VDI     

A kinetic investigation of coal liquefaction at short reaction times

Coal liquefaction kinetics have been studied at very short reaction times (less than 250 seconds) in order to emphasize the initial underlying physical and chemical processes involved. These studies were made possible by the use of a continuous flow stirred tank reactor (CSTR) which avoids the problems of slow heat up and cool down associated with the massive equipment required for running high-temperature and high-pressure liquefaction reactions. Preliminary physical (NMR and ESR) and chemical analytical results are presented on the coal liquids and reaction residues from Illinois No. 6 hv bituminous and Wyodak Black Thunder subbituminous coals.

ESR results showed that radical concentration in the solid residue changed during coal liquefaction. These changes were accompanied by changes in the NMR-derived aromaticity. The rate of decrease of organic-based radicals was different for Wyodak Black Thunder and Illinois No. 6 coals, perhaps indicating a different mechanism for the quenching of radicals in these bituminous and subbituminous coals. NMR spectra of the liquid products indicated that the initially produced material was relatively aromatic, and that subsequent products had lower aromatic content. This is consistent with secondary hydrogenation of the primary liquefaction products. Finally, the total oxygen contents of the coal residues decreased gradually during the first three minutes of coal liquefaction at 390°C. A corresponding decrease in the hydroxyl content of these residues was also noted.     

Thermal behavior and the determination of the polymer-polymer interaction parameter of polycarbonate and a thermotropic liquid crystalline polymer blends

Summary The surface modification of low-density polyethylene(PE) by liquid phase photograft polymerization with acrylic acid(AA), acrylamide(AM) and glycidyl methacrylate(GMA) was described. The grafting of AA and AM was proved and characterized by electron spectroscopy for chemical analysis(ESCA). It was found that fully hydrophilic surface can be obtained in very short irradiation time. With ESCA and attenuated total reflection infrared spectroscopy(ATR-IR), it can be confirmed that bifunctional monomer GMA was grafted onto the PE film surface. Through further reaction with GMA grafted film, heparin and protamine were immobilized onto the grafted film surface.     

Thermodynamic Modeling of the MgO–Al2O3–CrO–Cr2O3 System

A complete critical evaluation and thermodynamic modeling of the phase diagrams and thermodynamic properties of the MgO–Al₂O₃–CrO–Cr₂O₃ system at 1 bar total pressure are presented. Optimized equations for the thermodynamic properties of all phases are obtained which reproduce all available thermodynamic and phase equilibrium data within experimental error limits from 25°C to above the liquidus temperatures at all compositions and oxygen partial pressures. The optimized thermodynamic properties and phase diagrams are believed to be the best estimates presently available. The database of the model parameters can be used along with software for Gibbs energy minimization in order to calculate any type of phase diagram section.     

Preparation of ketoprofen‐loaded high‐molecular‐weight poly(vinyl alcohol) gels

High‐molecular‐weight atactic poly(vinyl alcohol) (a‐PVA) gels loaded with (R,S)‐2‐(3‐benzoylphenyl)propionic acid (ketoprofen) were prepared from 5, 6, 7, and 8 g/dL solutions of a‐PVA with a number‐average degree of polymerization of 4000 in an ethylene glycol/water mixture with an aging method to identify the effect of the initial polymer concentration on the swelling behavior, morphology, and thermal properties of a‐PVA gels. Then, the release behavior of ketoprofen from a‐PVA gels was investigated. As the polymer concentration decreased, the ability for network formation decreased, and the degree of swelling of the a‐PVA gels increased. In addition, the enthalpy increased with an increase in the a‐PVA concentration, but the melting temperatures of the gels prepared at different initial polymer concentrations were the same; this indicated that tighter gel networks would be formed by a higher polymer chain density. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Selective Oxidation of Methanol to Formaldehyde Using Modified Iron-Molybdate Catalysts

Methanol selective oxidation to formaldehyde over a modified Fe-Mo catalyst with two different stoichiometric (Mo/Fe atomic ratio = 1.5 and 3.0) was studied experimentally in a fixed bed reactor over a wide range of reaction conditions. The physicochemical characterization of the prepared catalysts provides evidence that Fe₂(MoO₄)₃ is in fact the active phase of the catalyst. The experimental results of conversion of methanol and selectivity towards formaldehyde for various residence times were studied. The results showed that as the residence time increases the yield of formaldehyde decreases. Selectivity of formaldehyde decreases with increase in residence time. This result is attributable to subsequent oxidation of formaldehyde to carbon monoxide due to longer residence time.