Non-markovian diffusion processes in polymers and a stretched exponential relaxation constitutive equation

Non-Markovian diffusion transport in polymers was studied. Applying the results of various researchers, a stretched exponential relaxation function was obtained and a linear viscoelastic constitutive equation formulated. Frequency dependent material functions, obtained from this constitutive equation were studied and the results successfully compared with experimental data for polyethylene oxide solutions. Sorption kinetics in a polymeric film were also studied. © 1994 John Wiley & Sons, Inc.     

A visual study on flame behavior in tone-excited non-premixed jet flames

A visualization study on the effect of forcing amplitude in tone-excited jet diffusion flames has been conducted. Visualization techniques are employed using optical schemes, which are a light scattering photography. Flame stability curve is attained according to Reynolds number and forcing amplitude at a fuel tube resonant frequency. Flame behavior is globally grouped into two from attached flame to blown-out flame according to forcing amplitude; one sticks the tradition flame behavior which has been observed in general jet diffusion flames and the other shows a variety of flame modes such as the flame of a feeble forcing amplitude where traditionally well-organized vortex motion evolves, a fat flame, an elongated flame, and an in-burning flame. Particular attention is focused on an elongation flame, which is associated with a turnabout phenomenon of vortex motion, and on a reversal of the direction of vortex roll-up. It is found that the flame length with forcing amplitude is the direct outcome of the evolution process of the formed inner flow structure. Especially the negative part of the acoustic cycle under the influence of a strong positive pressure gradient causes the shapes of the fuel stem and fuel branch part and even the direction of vortex roll-up to dramatically change.     

Diffusion of saturated hydrocarbons in low density polyethylene (LDPE) films

The diffusion coefficients at zero penetrant concentration, D₀, of n-heptane, n-heptane, n-octane, n-decane, and 2,2,4-trimethylpentane (TMP) in LDPE were obtained in the range of 25–50°C, using the desorption method. The dependence of D₀ on the size and shape of the penetrant is reported. It was found that D₀ decreases with increasing penetrant molecule size. The activation energies of diffusion in the temperature range of 25–50°C increase with increasing penetrant molecule size and are independent of temperature. The results are interpreted in terms of the free volume theory and semiquantitative estimates of the free volume parameters are reported.     

Binary blends of nylons with ethylene vinyl alcohol copolymers: Morphological,thermal, rheological,and mechanical behavior

Binary blends of ethylene vinyl alcohol copolymers, containing 62 (EVOH-62) and 71 (EVOH-71) mole percent vinyl alcohols, with nylons (nylon-6, nylon-6/12, and nylon-12) have been prepared from melt mixing in a twin screw compounding machine. Morphological, thermal, rheological, and mechanical properties were determined. EVOH-62/nylon-6 and EVOH-71/nylon-6 blends showed homogeneous phase morphologies in the nylon-6-rich region, and fine phase separations (c.a. 2 × 10^?7 m) in the EVOH-rich region. Melting point depression, positive deviations in viscosity and flexural modulus, and negative deviation in impact strength from the simple additive rule were generally observed. And the results were possibly interpreted in terms of compatibility and increased nylon/EVOH interactions over the nylon/nylon interactions. On the contrary, clean phase separations in large domains were observed from EVOH-71/nylon-6/12 and EVOH-71 /nylon-12 blends. Fibrillation was also obtained from EVOH rich blends. Probably due to the incompatible nature of these blends, yield at low rate of shear and a mechanical property drop were also observed.     

Efficient verifiably encrypted signatures from lattices

Verifiably encrypted signature schemes can convince a verifier that a given ciphertext is an encryption of an ordinary signature on a given message and the ordinary signature can be recovered by the third party, called adjudicator. In 2010, Rückert et al. proposed a general construction for the verifiably encrypted signatures, and then, they also showed that there exist the lattice-based verifiably encrypted signature schemes. Their constructions are very insightful, but their schemes need an extra adjudication setup phase and Merkle trees, so they have large parameters and keys, that is, they are inefficient. Also, their schemes provide only the limited signature capacity because the signing keys should be reissued after generating \(k\) th verifiably encrypted signatures. To overcome the weaknesses of Rückert et al.’s scheme, we construct a verifiably encrypted signature scheme based on the hard lattice problems. Our scheme provides the full functionality, i.e., the signatures can be generated without any limitations and does not need any extra adjudication setup phases. Moreover, the size of the secret keys in our scheme is constant. Our scheme provides unforgeability, opacity, extractability, and abuse-freeness in the random oracle model.     

Diffusion of organic penetrants through low density polyethylene (LDPE) films: Effect of size and shape of the penetrant molecules

The diffusion coefficient at zero penetrant concentration D₀ of dichloromethane, chloroform, carbon tetrachloride, cyclohexane, benzene, o-xylene, m-xylene, and p-xylene, and n-hexane in LDPE were measured at 25°C, using the desorption method. The D₀ values obtained in this way are correlated with the size, shape, and chemical nature of the penetrant molecules. The temperature dependence of the diffusion coefficients of toluene and n-hexane in LDPE are also reported in the limited temperature range of 25–45°C. It indicates that, in spite of a size larger than that of toluene, n-hexane has a lower activation energy of diffusion.     

Preparation and characterizations of interpenetrating polymer network hydrogels of poly(ethylene oxide) and poly(methyl methacrylate)

Interpenetrating polymer network (IPN) hydrogels based on poly(ethylene oxide) and poly(methyl methacrylate) were prepared by radical polymerization using 2,2‐dimethyl‐2‐phenylacetophenone and ethylene glycol dimethacrylate as initiators and crosslinkers, respectively. The IPN hydrogels were analyzed for sorption behavior at 25°C and at a relative humidity of 95% using dynamic vapor sorption. The IPN hydrogels exhibited a relatively high equilibrium water content in the range of 13–68%. The state of water in the swollen IPN hydrogels was investigated using differential scanning calorimetry. The free water in the hydrogels increased as the hydrophilic content increased. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 258–262, 2003     

Code-to-code comparison study on rotor aeromechanics in descending flight

This paper conducts the aeromechanics study using the two different rotorcraft computational structural dynamics (CSD) codes, CAMRAD II and DYMORE II, for the rotor in low-speed descending flight. The three test cases of the HART (Higher-harmonic control aeroacoustic rotor test) I -baseline, minimum noise, and minimum vibration- are considered in this study of the blade-vortex interaction (BVI) airloads, rotor trim, blade elastic deformations, and blade structural loads. The two prediction results are compared to each other for a code-to-code comparison study as well as to the measured data. Although CAMRAD II and DYMORE II use different theories and models, most of the prediction results are similar to each other and compared fairly well with the wind tunnel test data. For all the three test cases, the two rotorcraft CSD analyses show good prediction on the fluctuations of the section normal force (M²C_n) due to BVI, but both over-predict the trimmed collective pitch angle. The blade elastic deformations, such as flap deflection and elastic torsion deformation at the tip, are reasonably predicted by both rotorcraft CSD analyses. But, the CAMRAD II result using the multiple-trailer wake model with consolidation is slightly better than the DYMORE II prediction with the single wake panel model particularly for the elastic torsion deformation in the baseline case. In addition, CAMRAD II and DYMORE II both correlate reasonably the blade structural loads, such as flap bending, lead-lag bending, and torsion moments, with the measured data; however, the CAMRAD II results are moderately better than the DYMORE II predictions.     

Effect of deposition temperature on dielectric properties of PECVD Ta2O5 thin film

Tantalum oxide film formation by plasma-enhanced chemical vapour deposition (PECVD) using TaCl₅ as a source material was examined. The effects of deposition temperature on the formation, structure and electric properties of the Ta₂O₅ film were investigated for Al/Ta₂O₅/ p-Si (MTS) capacitors. The deposition rate and refractive index increased with increasing deposition temperature. It was found that the structure of Ta₂O₅ deposited by PECVD was amorphous as-deposited. However, crystalline -Ta₂O₅ of hexagonal structure was formed by a 700 °C, 1 h heat treatment in argon. Capacitance and relative dielectric constant of the PECVD Ta₂O₅ were found to be 2.54 fF m^–2 and 23.5, respectively. The PECVD films obtained in this study have higher dielectric constants and remarkably better general film characteristics than those obtained by other deposition methods.